Magazine

, , ,

EndoMag

, , ,

  Mean Arms came into the Pistol Caliber Carbine (PCC) market with an interesting idea. They made a 9mm insert for Magpul Pmags, called the “EndoMag”. This eliminates having to use a special lower receiver or magazine adapter. I was intrigued after we discussed them on the Gun & Gear Review Podcast. Mean Arms kindly sent one for review.

  The Endomag is not your standard magwell adapter. First up, it goes inside a Gen 2 or 3 Pmag body. Just take your Pmag apart and set your spring and follower somewhere. Now, depending on where you live, cut the Endomag to the required magazine capacity. It has marks for 15, 20, and 30 rounds and comes in a 10 round configuration. The included instructions tell you how to do this and it is super simple. I cut mine to accept 30 rounds. Then all you need to do is slide the Endomag assembly into the Pmag body and install the floorplate. It is now ready to be used.

  Before using the Endomag, it is recommended that you break it in. Basically, it involves testing to make sure the mag body doesn’t rub the bolt. Then testing cycling, by hand, with the Endomag installed. Again, the instructions are very useful here. I could feel the bolt rubbing a little on the one they sent me. I just did as instructed and have had no issues.

  The Endomag has some great benefits, and a few that leave me wanting something else. I love the ability to load rounds just by pushing them down, much like a standard AR magazine. This is because the Endomag is a double column, double feed magazine, much like the Colt 9mm style magazines. The Endomag also features a last round bolt hold open feature. My biggest complaint about the Endomag is the built in ejector. It functions great, but takes some training to unload the firearm. One has to cycle the bolt back by hand to eject the live round. Then while the bolt is back, you have to drop the magazine. If you drop the Endomag out before cycling the action, the round will not eject, and thus just go right back into the firing chamber. Like I said, this is a training issue, but during a competition this could confuse some people and maybe even cause an unsafe condition. Besides this training issue, the Endomag doesn’t require any other learning curve. It is the same size as a standard magazine, therefore it fits in all your gear. All the rifle’s controls will also be the same, especially the magazine release button. I also noticed that the magazine spring, that Mean Arms uses in the Endomag, looks very much like the spring that came out of the standard Pmag. So much that I would guess it is the same spring. The EndoMag also lets one “try out” a PCC without having to purchase a lower receiver or magwell adapter. Of course you would still need a complete 9mm upper.

  I used the Endomag a lot. As expected, it ran like a champ. If I had a failure, it was minor, because I don’t remember any. One of the nice features about installing the Endomag in a Pmag body is that you can mark the Pmag with “9mm” in the dot matrix! That way you have a better chance of not getting your magazines confused. As far as training with the Endomag, I give it a thumbs up. 9mm is cheaper than 5.56/223, and has about the same felt recoil. So you can get some good training in, for cheaper.

  Mean Arms has a good idea with the Endomag. It has some decent features to aid in training. Goes into a magazine body that you probably already have, and works fantastic. I just had to get over the ejecting a round before dropping the magazine. If you think the Endomag is for you, go give one a try, they are inexpensive enough to see.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

9mm magazine kit for converting standard AR-15’s to 9mm without a magwell insert

Target Market:

Those wanting a 9mm carbine without the added cost of an adapter

FNBs (Features & Benefits of this product):

  • Converts a Magpul 30-round 5.56x45 PMAG (Gen 2 and 3) to 9mm

  • Functions as a standard AR magazine

  • No magwell adapter needed

  • Uses a standard AR15 receiver

  • Insert comes fully assembled.

  • Uses same controls as a standard AR

  • Uses standard mag pouches, etc.

  • Last round bolt hold open

  • Lifetime warranty

  • Built in Ejector

  • Compatible with Colt and Glock style BCG’s

  • Indents for 15, 20, and 30 round options, Ships as 10 round capacity

What other aesthetic options or finishes are available?

None

What others are saying?:

Charles F.  5/5 stars @RainierArms

Great 9mm option. Worked like a champ, I had no issues with the operation at all. Great product.

Link to other reviews:

The Firearm Blog

Price point:

MSRP = $29.99

Retail = $29.95 at AimSurplus

I need it now! Availability:

Mean Arms

Our Rating:

Pros:

  • Uses Glock or Colt 9mm BCG’s

  • No lower modifications or special lower required

  • Last round bolt hold open

  • Uses same spring as P-Mag

  • Fits same accessories as standard AR magazines

  • Uses same controls as standard AR

Cons:

  • Only available in 9mm

  • Magazine body required

  • Ejector in magazine

Score: 7.00 Good

70.jpg

Favorite Link:   We The Female

, ,

The Mag Feeder

, ,

  As a shooter, we all sometimes want easier magazine loading. Welcome to The Mag Feeder. I am not one to typically use magazine loaders, so there is that. But with lots of them on the market, this AR15 magazine loader is a little different. Manufactured by Six Axis Development. I can’t remember if I contacted them, or the other way around. Either way, the sent me one for review.

 The Mag Feeder is very well thought out. The first notable feature is the USGI magazine catch. Yes, the same one as on an AR15. This keeps your magazine locked in place while using the loader. Now, as with everything now days, it is made from a chemical resistant polymer. So you don’t have to worry about destroying it from gun lube or cleaners. It also folds up for storage and ease of transportation. Last up is the neat little slider that does the actual work.

 Loading the Mag Feeder is pretty self explanatory. First unfold it so that it lays flat. There is a magnet that holds it in the folded position. Lay it on a flat surface. Slide a magazine on until the mag catch latches. Throw some 223/556 or 300 Blackout rounds in the loader. Or put them in the little load slot toward the top. Organize the shells so they all point the correct direction, they will not go in the wrong way. You can also take out the pusher block and load them in from the top. Once all the rounds are in the loader, slide the “pusher block”  down and the magazine is now loaded. Then, of course, push the mag button and pull the loaded magazine out. Now go shoot.

 Now we know how The Mag Feeder is suppose to be used, I’ll tell you how I use it. I basically just pour a bunch of rounds into the body of the Mag Feeder. Then I straighten them out. I only need to use the “loading port” for the last few rounds. So it is pretty quick, and really easy to use. I tried it on a bunch of different magazine styles, from USGI to Pmags and they all worked fine. The pusher block is also held at the top of the loader with a magnet, actually one of the same ones that keeps the loader folded. This is nice because it doesn’t fall out. But if it does, it will only go back in one direction.

 There are lots of things to like about The Mag Feeder. Ease of use, of course. It also has marks for how many rounds are in the loader, well at least by 5’s and up to 30. This is nice if you want to load a 20 round magazine for example. I have one dislike about the Mag Feeder. It doesn’t stay open. I would have some sort of catch made to hold it open. When you pick the loader up off of a table, it just folds partway. I also like how it will fit in a double magazine pouch. Because it folds, you can stick it in an ammo box, or most soft case side pouches.

 The Mag Feeder is staying in my range bag. I am very pleased with how it works, and it can save your thumbs. If you need an easy way to load AR15 magazines, this might be a good option. Six Axis was also kind enough to send a .30 cal ammo can and some .223 ammo. That was a plus that I didn’t expect. Go check out The Mag Feeder and maybe some of their other products while you’re there.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Foldable 30 round AR15 magazine loader

Target Market:

AR15 users who want easy loading of magazines

FNBs (Features & Benefits of this product):

  • Made in the USA

  • Safe for hands and magazine lips

  • Folds in half for portability

  • Magnetic operated to keep closed in your bag/box

  • Magnetic pusher block to keep from falling out

  • Works with all AR15/M4 magazines

  • Chemical Resistant

  • Allows for easy inspection of rounds prior to shooting
    Securely grabs on to the magazine

What other aesthetic options or finishes are available?

None

What others are saying?:

Nothing found

Link to other reviews:

Some Youtube videos, but that’s it

Price point:

MSRP = $59.99

I need it now! Availability:

The Mag Feeder

Our Rating:

Pros:

  • Easy to use

  • Quick

  • USGI Mag catch

  • Folds and stays closed

  • Fits in double mag pouch and ammo cans

  • Capacity markings

Cons:

  • Doesn’t lock in open/use position

  • Price

Score: 8.00 Great

80.jpg
,

Amend2 AR-15 Magazine

,

   Amend2 is a new company that has entered into the AR-15 magazine market. Having another option in the AR magazine market is always a good thing. Amend2 offers mainly standard capacity magazines of 30 rounds in 5.56/.223, but also lists a 20 round option. I was sent the 30 round black ones for review. 

  I was pretty excited to try these mags out. And since I was going to a big shoot, the timing was perfect. When the mags first arrived, I immediately checked them to see if they would drop free. All of the ones they sent me, hit the floor when the mag release was pressed. This was even in a rifle that will hang up on some other magazines. Of course,  the Amend2 mags also locked back the slide, as expected. One thing I noticed is that the magazines seemed heavier than both my mil-spec and P-mags, but they actually weigh really close to the P-mags. Don't get discouraged by this, because they are made from a tough polymer. I did toss one across the road and it had only very minor scratches. Then I drove over it, both loaded with empty cases and unloaded completely. I really just wanted to see if it would crack, but it didn't. The baseplate on the mag is slightly larger than some and has a checkerboard texture on the bottom. This is a good thing if you drop your mags a lot on hard surfaces. It also helps when retrieving them from a pouch. As with essentially all good magazines, they have anti-tilt followers and stainless steel springs. 

  You probably really want to know how they function? Okay. Two of the magazines were run in full auto AR's, all day. I don't have an actual round count, but it was over 1000 rounds per magazine, probably more like 2000 each. One magazine ran flawless with no problems at all. The other one had 1 failure to feed. I would say these magazines are good to go for anything that you would want to use them in. I have also been using these magazines when I need to use an AR mag, with no problems. I have also ran them suppressed, in an SBR. 

 Currently,  Amend2 offers the magazines with some options. They come in black, OD green, and tan. The anti-tilt follower and base pad insert are red. According to their website, other magazine colors are also available: Zombie green, Ghost white, Dark earth, and Desert tan. But it is a little confusing, I don't know if they mean magazine body color, or magazine follower color. While surfing Amend2's Instagram, I noticed that they can also do custom nameplates for dealers, or maybe anyone if you purchase enough of them. It appears that "Amend2" on the mag body is replaced with "your company logo/name". 

  I have been quite impressed with these magazines. Amend2 has done a good job with the durability and function. The price is on par with other 30 round magazines. So, if you are looking for some more magazines, and aren't we all, give the Amend2 mags a try. 

   

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

AR-15 30 round polymer magazine

Target Market:

AR-15 owners who can own 30 round magazines 

FNBs (Features & Benefits of this product): 

  • Polymer construction

  • Anti-tilt follower

  • Stainless Steel spring

  • Textured body and floorplate

  • 30 round capacity

What other aesthetic options or finishes are available?

OD Green, Tan, and maybe more

What others are saying?:

Jay @ Brownells: 4/5 stars

GOOD MAGS, GREAT PRICE

I bought a 10 pack of these as the price is awesome. I was about to buy 10 aluminum mags from another site, and just so happened to check brownells for comparison. I stumbled across these and decided to give them a try after watching some youtube reviews. At first, these did not fit in my AR, but my rifle has a very large broached mag well. After debating whether to send them back for a refund and lose out on some money, I decided to trim some of the material on one mag that was contacting my AR and then they slid right in and out like they should have. It took about 5 seconds a side with a dremel and a sanding wheel per side and it solved the issue. These do not fit 100% of the AR's out there, so keep that in mind. That is the only reason i docked a star. Another issue arose that they would not stay seated in my AR, compared to PMAG's and Mission First Tactical mags. Frustrating to say the least, so what did I do? I bought another complete lower (HAHA!) to compare. As it turns out, the mag release/catch spring was completely shot, so after replacing that spring, they remained in the rifle. I test fitted in the new AR lower and they were tight fitting unlike in the other AR where there was some wiggle room and slid right out. Great construction, the grip and texture of these mags is unique and aids in handling.

Tim L. @ Brownells: 4/5 stars

DECENT NO FRILLS POLYMER AR-15 MAGAZINE

For the price, it's a good magazine. Feels solid right out of the package, however, I tried in both of my AR's and the magazines would not drop free from the gun. Other than that, they claim to feature no-tool disassembly, however, depressing the "2" on the bottom far enough to disassemble the magazine surely requires pressing down with something other than fingers (aka a tool). But a 5.56 bullet tip will do the trick. I'll keep them in the range bag for plinking, but I will stick with the tried and true PMags and HexMags for training, competition, and personal defense.

Link to other reviews:

Ghostginthree on YouTube

Price point:

MSRP = $14.95

Retail = $14.99 @ Pershingarmory.com

I need it now! Availability:

Pershing Armory, Amend2, and Brownells 

Our Rating:

Pros:

  • Durable

  • Stainless Steel spring

  • Anti-tilt follower

  • Made in U.S.A.

  • Custom Name Plates

Cons:

  • Rough looking

Score: 8.0 Great

 

Chad's Favorite link: Axelson Tactical

 

 

 

 

,

HCMAGS HC3R 10/22 magazine

,

   HCMAGS is a company that makes an easy loading magazine for the 10/22, or any other firearm that uses 10/22 magazines. I first saw one of their magazine systems at a local gun shop. The idea looked really cool, so I purchased one. The magazine holds 25rds of .22lr with a side saddle that holds another 20rds for quick loading. 

  The HC3R magazine can be used like any other mag, but why? Well, since the HC mag has a slider on the side of the magazine, you could just slide it down while loading it up. But there's more. The back of the magazine acts like a stripper clip. One can push it down slightly and rock the whole stripper clip out. Fill the clip up with 25rds, pull the slider on the side of the mag down and lock it in place. Then roll the clip back into the magazine and release the slider and your ready to go. When the clip is off of the magazine, you can also put 20rds in the magazine side saddle before loading up the other 25rds. Once you have depleted the contents, you can take the stripper off of the magazine, slide it over the rims of the 20rds in the side saddle, and reinstall it with 20 new rounds. An extra stripper clip is included also. 

  Now I would have thought that this was the best thing since sliced bread. The biggest problem is that I couldn't get the magazine to feed in 3 different 10/22's. HCMAGS instructions say to watch their video on their website to make sure you are loading the magazine correctly. I watched it 3 or 4 times and still the magazine wouldn't work. I called them and they told me that I had a 1st generation HC3R mag and when the 2nd gen was out they would replace mine with a gen 2. They replaced it after about 6 months. Okay, sometimes manufacturing takes longer,  so I was alright with that. Now I have my gen 2 in hand, and it works a little bit better. It only jams about every 3rd round, instead of every time. I can't load 25 in the mag or it won't even feed, I have to load 20 to get it to feed the first round. Different manufacturers of .22lr don't seem to make a difference either. As is with different 10/22's.

  Basically the HC3R magazine is an innovative design. It is kind of a shame that it doesn't live up to its hype. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quick reloading 10/22 magazine

Target Market:

Someone who wants extra magazine capacity without the need for an extra magazine. 

FNBs (Features & Benefits of this product):

  • Quick reloading 
  • Stripper clips
  • Lockable thumb stud
  • Extra ammo on hand in magazine side saddle
  • Disassembles for cleaning

 

What other aesthetic options or finishes are available?

Tactical pack available with extra stripper clips, loader, and case. 

Tactical pack

What others are saying?: 

 Bill K. at Botach 2/5 stars

Cumbersom

This magazine is difficult to load for me. I found bullets jamming during the loading process and falling out of the Rib Clip and extra holding channel when I didn't hold it properly. For me, it is more hassle than it's worth.

LEXRated at Cabelas 5/5 stars

Awesome and Innovative

There's not much real fun in loading, but this system these folks have developed is simply amazing.

Follow their instructions and get a couple extra magazines and this system will let you shoot all day and even for days. It is effortless.

NOTE: this listing is incorrectly listing the magazine as a 20 round magazine. Once they update the product to show it is in fact a 25 round magazine and it's part of the whole system whereby the strip clip feeders hold 20 rounds on the same mag. That means with one mag you have 45 rounds, 25 in and 20 out, and dumping the 20 in is super fast.

I hope Cabela's gets the HC Mags HC3R Tactical Kit (I have one already) but others need to know about it. I do not work for HC, just an impressed customer of their product and fan of Cabela's.

Additional note: some may say that having an open/exposed magazine makes it not worth it, but considering how much more one typically shoots with 22, i see the value in making the loading delays and effort go away and getting back to shooting more important. Plus, it's a breeze to clean and frankly, most of any significant debris easily going in, can fall out the same way. Mud is mud and play safe.

Price point:

MSRP = $29.95 at HCMAGS

Retail = $30.00 at Botach

I need it now! Availability:

HCMAGS.com

Our Rating: 

Pros:

  • Stripper clip
  • Steel feed lips
  • Ease of loading
  • Comes apart for cleaning  

Cons:

  • Will not feed properly
  • Shouldn't need special loading instructions

 Score: 4.00 Bad

 

 

 

Chads favorite link of the day: Northwest Firearms

, , , ,

Adaptive Tactical Venom-SE Magazine Conversion

, , , ,

AT1 The Adaptive Tactical Venom-SE is a magazine conversion kit for for Mossberg 500 and 590 shotguns in 12 guage.  The complete kit comes with a new forend with the magazine adapter, a pistol grip adjustable stock, and either a 10 round box magazine or a 10 round drum magazine.  Adaptive Tactical sent me the multi-cam kit with the "Wraptor" forend, 10 round magazine, and pistol grip adjustable stock. The offerings from them are available in a variety of patterns. The kit only works with 2 3/4" shells. Because the kit puts the magazine in front of the standard loading gate, it causes the user to have to put their support hand farther out, so some users may have trouble cycling the shotgun completely, especially those of smaller stature.

Installation of the Venom-SE kit wasn't extremely hard. If you know how to disassemble the 500, including the magazine tube, you should be able to complete the install. If not, Adaptive Tactical does offer installation.  After you have made sure the firearm is unloaded, remove the barrel, trigger group, left & right shell stops, bolt carrier, forend, shell lifter, and finally the magazine tube. The kit has decent instructions on this, so don't feel overwhelmed. Since the Venom-SE kit also comes with a new stock, the old one must also be removed. Now it is time to install the magazine tube adapter. To do this, screw the supplied tube into the receiver threads. It most likely will not line up with the magazine tube on the bottom. So one must sand the end of the tube down. This process takes a while, so be patient. After some sanding, try the tube again. Eventually the mag well will be parallel to the sides of the receiver, you are now done with the hardest part. Now it's time to reinstall all the parts with the new ones supplied. The only strange part in the installation is that the left side shell plate is not reinstalled. I tried it with both shell plates installed and the shotgun had problems feeding. When I removed it, the problems went away, so do follow this step. When installing the stock, you must choose one of 2 spacers that go between the receiver and the stock. One has a slot for a sling, and the other does not.

AT5The kit comes with one 10 round magazine, and a 5 round box magazine is also available. Adaptive Tactical also sent a 10 round drum magazine for me to try out, as well. I really liked the 10rd stick magazine as it functioned flawlessly in my tests.  The 10rd drum magazine, however, did not function nearly as well. The shotgun would sometimes fail to pick up a round out of it. At first, I thought maybe it was from me short stroking the slide, but I made a point to push forward and backward on the forend until it stopped, and the drum mag would still not always pick up a round, about 1-2 times every magazine. The drum magazine is shorter than the stick mag and the drum sits out to one side off of center. Because the drum is offset, they made it ambidextrous, which is a very nice feature. To insert the magazines, you must first put the front of the mag in, and then rock it back and up, very much like an AK mag.  To remove the magazine, you must push the magazine release lever behind the mag, and then rock it out, also like an AK.

AT4

My favorite part of the kit is the AR-15 style M-4 stock with a built in pistol grip. The stock is adjustable for length, and has built in cups for quick detach sling swivels. The pistol grip was very comfortable and has a storage compartment in it. The base to the storage compartment was extremely hard to get on and off, since Adaptive doesn't mention that it has storage, it makes me think that maybe they know this. On the stock is also one of the most comfortable butt pads I have ever used. It is about and inch thick and really cuts down on felt recoil. Because this is a pistol grip stock on a Mossberg, you can not get to the safety without removing your hand from the pistol grip (the safety is on top of the action.)

AT2

The Wraptor forend has 3 picatinny rails mounted on an elevated platform that sits above the barrel. 1 rail on top, and 1 on each side. The forend uses a sight tunnel through the rails. The tunnel is very large and may actually help one to find the front sight or bead quicker. It's kind of like looking through a red dot sight. The rail on the top of the Wraptor forend is too high to put a red dot on (I tried) and is probably best suited for some sort of flashlight. Also on the forend are some threaded holes to use the supplied kelly grip. The grip is basically like a vertical foregrip but attaches to the side of the forend. The kelly grip is stouter than I thought it would be. It worked fine also, but seemed a little awkward. The Wraptor also is designed in such a way that there is a lip on the backside to help from getting your hand pinched when cycling the shotgun.

If you are interested in getting a magazine conversion for your Mossberg, Check out the offerings from Adaptive Tactical. These kits are made from a polymer that is extremely rugged and feels almost like aluminum. They also offer different options than the kit I received. So if you just want the magazine conversion kit with a forend, or maybe just the stock, they have options available.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Magazine Conversion for Mossberg 500 shotguns

Target Market: Shooters wanting easier loading or maybe Heavy class 3-gun shooters

FNBs (Features & Benefits of this product):

  • Magazine conversion
  • 5 rd box, 10 rd,box or 10 rd drum magazines
  • Pistol grip adjustable stock
  • Forend with picatinny rails

What other aesthetic options or finishes are available? 

  • Black
  • Kryptek
  • A-TACS
  • Multicam
  • Desert Digital

Price point: 

MSRP = $339.99 (as received with Wraptor Forend, 10 rd box mag, and stock in multicam)

$299.99 (Wraptor Forend, 10 rd box mag, and stock in black)

$229.99 (Wraptor Forend with 10 rd box magazine)

$199.99 (Standard forend with 5 rd box magazine)

I need it now! Availability: You can readily purchse the Venom-SE magazine conversion directly from Adaptive Tactical.

Our Rating:

Pros:

  • Adjustable stock
  • Pistol grip
  • "Wraptor" forend
  • 10 round magazine
  • Pattern options
  • QD sockets built in
  • Ambidextrous drum magazine
  • It's now a Magazine fed shotgun!

Cons:

  • Installation
  • Safety isn't easily reached
  • Drum magazine didn't function as good
  • Price (though less expensive variants are available)

Score: 7.5 Good75

 

 

Chad's Favorite Link: U.S. Tactical Supply

Firing Line Review

 

 

, , , ,

Bravo Concealment RTT Holster Combo Pack

, , , ,

Bravo Concealment RTT Holster Combo

I remember listening to a podcast back when I first became a gun owner, and one of the hosts jokingly claimed that when you become a concealed carrier, you are almost guaranteed to have a drawer full of holsters at some point. Sure enough I can support that claim now that I have multiple handguns, each of them needing a holster for inside the waistband (IWB) or outside the waistband (OWB) carry. Add in a mounted weapon light, and thats another set of holsters. The good news is many other gun owners have the same problem, and kydex holster companies have attempted convertible holsters that can easily be swapped between OWB and IWB.
One such holster is the RTT Holster from Bravo Concealment. Available in a combo pack that includes both IWB and OWB belt clips for either training or competition use, or carrying concealed inside the waistband. The combo pack also includes kydex magazine holsters, either as two single mag pouches or one double mag pouch.  The RTT holster is designed to fulfill most of the requirements for a defensive pistol class setting, all for one solid price.

Bravo Concealment RTT Holster Combo

The RTT Holster gets it's name from Range Time-Tactical Shooting, LLC. You maybe more familiar with their YouTube Channel of gear reviews and training promo vids. The RTT Holster Combo Pack is marketed as the gear package ideal for taking a RTT Defensive Pistol Class. Bravo Concealment offers the RTT holster separately as a lightbearing or plain standalone holster for $74.99 if you already have mag pouches you prefer to run in the classroom or competition, as well as the standalone magazine holsters as either double, or two single magazine pouches.
 In wearing the RTT holster and mag pouches around the farm for a week with my Smith & Wesson M&P357c w/ Streamlight TLR3, I really appreciate the robust construction and the hand-fitted care that when into the components. The inward curve of the belt loops on the holster and pouches fits the natural curve of the body as well as provides good friction against the belt, so your rig wont be sliding around your waistline all day.

Bravo Concealment RTT Holster Combo

The advantage to selecting two single mag pouches is the flexibility on the belt, you can either place both side by side on the support hand side, just one, or mix it up to fit your training scenario. There is an option to have the bottom edge of the kydex pouch cut slanted to allow for better mobility during pronating or crouching exercises. Another great feature Bravo Concealment puts into these mag pouches is a tensioning screw just to the right edge of the magazine that can be tightened or loosened with a screwdriver. Most holster makers will tell you to heat up the kydex to be pliable enough for manually reforming, but its nice to see this maintenance step simplified into the engineering of the mag pouches. Logically they will be used more frequently that the main handgun holster during courses of fire (unless your only practicing your drawing mechanics) so its nice to able to adjust the tension on the fly.

Bravo Concealment RTT Holster Combo

The RTT holster itself is an all around good OWB holster. Strictly speaking, outside the waistband kydex holsters all sort of look the same. The key differences between them to me are the cut and the clips. By cut, I mean the top opening of the holster. There's a balance thats needed in order to protect the trigger guard yet expose the magazine release, as well as leaving adequate clearance for the gripping hand's fingers to get a full, firm purchase on the handgun's grip... especially under duress. Several draw-strokes under standing, sitting, and kneeling positions were all positive in my testing.
The clips, or belt loops in this case, are what I would consider and great choice for OWB carry and training scenarios. Instead of using actual clips that would allow the holster to be attached or removed without unfastening the belt, Bravo uses polymer injection molded belt loops. These require the belt to be threaded through the loops at the same time as your pant belt loops, unless you run an exterior tactical belt which of course is possible by selecting one of the 1.5" - 2" belt width options on the Bravo concealment website. These loops are really ideal for heavy duty drills and generally harder use than other style clips, as they will withstand more stress from drawing and reholstering forces. I've seen other OWB kydex holsters on the market with thinner belt loops cut from the same kydex sheet and I was never really impressed by their thinness and sharp edges. Also a note: Bravo offers pancake-style belt loops separately.

Bravo Concealment RTT Holster Combo

This brings me to the IWB capability of the RTT Holster, which for me did not go well. My real only issue with this holster as an IWB option is it was very uncomfortable for a shooter my size.  I carried it in the 4 o'clock position like I'm accustomed to carrying with other IWB holster types, and just feels like a huge hard object not conforming to my hip at all. For context. my build is north of 220lbs, and the holsters I usually wear for CCW are leather backed with a half kydex shell.  I've tried adjusting the RTT to an appendix carry position, and an almost 5-6 o'clock position to reduce the direct pressure on my hip with some relief, but still just not feasible for me unless 5.11 decides to make tactical sweatpants.

Bravo Concealment RTT Holster Combo

Now take note, if you have a slimmer body type, this holster should ride better on your hip. However with that said, I also found difficulty with the IWB soft clips themselves as they interfere with the drawing hand. Even with the clips mounted at their lowest position on the holster's grommets and adjusted for a 1.25" width belt, there wasn't enough clearance for my fingers when drawing the weapon, and I by no means have sausage fingers! My second grievance is they are tricky to loop under the belt and snap with one hand or without looking. I'm not sure why the button snaps themselves were so difficult either, but I wasn't able to figure out how to snap them correctly in one attempt. These are just not working for me, but it is worth noting that Bravo Concealment also sells polymer injection molded IWB belt clips that would be preferable in my opinion over these soft belt clips.

Bravo Concealment RTT Holster Combo

All in all, I would certainly recommend getting the RTT Holster Combo Pack if you wanted a starter's kit for training courses or competitive shooting events, especially if you wanted to retain a mounted weapon light on your gun using an outside the waistband holster. If your class / competition requirements include a IWB holster and you are confident this style of holster will fit inside your pants, I would say get the 1.5" or 1.75" IWB belt loops instead of the soft clips. The gear is solid, and the customer service at Bravo Concealment is on point. Now get your gear and hit the range!

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The RTT Combo Pack provides everything needed to attend an Range Time Tactical Defensive Handgun Class. Whether you are a casual shooter or a serious RTT enthusiast, the RTT Combo Pack will help you purchase everything you need at a discounted price.

Target Market:  CCW carriers (OWB or IWB), Handgun Training Classes, 3-Gun competitors

FNBs (Features & Benefits of this product):

  • Kydex RTT Holster available with or without pistol light.
  • 2 Single Mag Pouch *OR* 1 Double Mag Pouch
  • IWB Soft Belt Loops/ IWB Belt Clips
  • Designed for outside the waistband carry, but can easily be converted to inside the waistband by switching out the belt loops.
  • Thinner profile and 0° cant allowing the ability to add more gear to your belt.
  • Hand molded holster for solid retention of weapon.
  • Robust 1.5” or 1.75” injection molded belt loops.
  • Adequate room for a positive grip thus enabling a smooth draw with solid weapon retention.
  • Belt loops are adjustable to create a desired cant for greater concealment.
  • All edges on holster are rounded for comfort.
  • Kydex .08 thick
  • Bravo Velcro Patch

What other aesthetic options or finishes are available?: Black, OD Green, Flat Dark Earth, Coyote Brown.

What others are saying?: "I bought the RTT holster to support the Indiana company it was named after. I carry the G19 and love the holster. High quality, thick kydex. I bought the holster along with a single mag holder. Perfect retention, plus I love the fact that there is a cutout for the index finger so I can get a FULL grip before drawing. I did have to wait 3 months to get it, but it was worth it for me. I don't buy a lot of gear, but what I do have I like to spend the extra time and money to get the best I can afford. I feel like I made a good decision. I would not hesitate to purchase again from them." DefensiveCarry.com Forum User

"I recently picked up the ‘RTT Holster’ from Bravo Concealment and wanted to share my thoughts on the holster. Let’s start with customer service. The fit and finish on Bravo holsters are stellar. I was very impressed with the quality and attention to detail that was evident in the holster I received. My holster was free of sharp edges and rough spots throughout. Not to be disappointed, function follows fit and finish with everything Bravo makes. My holster was for a Glock 17 and the retention was excellent. My Glock clicked into the holster and stayed in place until I wanted it out. The ‘RTT Holster’ is designed primarily as an OWB holster and that’s how I use it. Given the way the holster curves around the body and the way the belt loops pull the holster close in, the holster conceals quite well. Options are available for IWB use if you’re interested. I’ve run the Bravo Concealment ‘RTT Holster’ through two handgun classes and use it for concealed carry on a daily basis and I couldn’t be happier with how it performs. Having purchased my holster for the Glock 17, I actually got a bonus feature in the since that the holster also works very well with the Glock 19 & 26." Shanes Gear Thread

Price point:

  • Retail: $142.99 -10% using coupon code RTTCOMBO10

I need it now! Availability: Brave Concealment Website

Our Rating:

Pros:

  • Convertible from OWB to IWB using supplied clips
  • RTT Holster is well made with solid retention
  • Hardware are common screw heads instead of hex or torx
  • Mag pouches available as two singles or one double pouch
  • Slant cut on mag pouches for better mobility / shooting positions
  • Mag pouches have tension screw for user adjustability
  • Holster and mag pouches are adjustable for cant
  • Injection molded belt loops are tough and rugged
  • If your pistol has an RMR or other micro red dot, Bravo will cut a recess for clearance

Cons:

  • Concealed IWB carry is not as comfortable as other IWB only holsters
  • Soft belt clips hinder clearance for drawing hand
  • Price still higher than separate components on the market

 

Score: 7.5 Good

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Firing Line Review

 

 

 

, , ,

SGM Tactical Glock Drum Magazine

, , ,
SGM Tactical 50 rd Drum

You don't have to be a mathematician to know 50 is better than 33, 17, 15, or even 10. That's the simplest reasoning you need to pick yourself up a 50 round drum magazine for your Glock pistol, Keltec Sub 2000 Glock model, or your AR15 chambered in 9mm that accepts Glock magazines. When I first learned that SGM Tactical was importing these polymer drum magazines, I had to at least get one. Luckily, they were only about $69.00 at the time. That must have been an introductory price, because lately the price for these on retail shelves has almost doubled do to demand. Who doesn't want an entire box of 9mm cartridges loaded and ready in a single magazine?
Well, those who don't like the magazine weighing down their firearm down like a brick tied to the wrist. At least it gets lighter as you shoot, sort of countering the fatigue you may start to feel holding up the additional pounds. For pistol users, the drum obviously presents a holstering issue, unless you wear suspenders. Also, loading all 50 rounds into the magazine is a longer process.... more of a sit down, and make small talk to pass the time away experience. The ratcheting lever makes it easier, and with practice you could speed up the pace quite a bit. Be aware though if you ratchet too far and carelessly drop a round in the stack improperly it can end up backward to perpendicular. All and all aside from the unconventional nature of its shape, size, and weight, what's not to love!?! Firing a 50 round volley of finger-numbing of freedom is some of the funnest and most expensive time you can have at the range.

SGM Tactical 50 rd Drum

For carbine owners who insisted on having a platform that takes advantage of the abundance and quality of Glock magazines in the world, this SGM Tactical Drum Magazine is a little black treasure. Both the Keltec Sub 2000 9mm Glock model and various AR-15 platforms that accept Glock mags are what the SGM drum was designed to shine in. The stick portion of the magazine that goes in the magwell is about the same size as a 17 round magazine, so it will fit the Sub2k well, and protrude a bit low on AR15 platforms. That may be a turn off for those who dream of Lone Wolf G9 carbines or other builds such as DDLES, but thats the nature of the beast. Any shorter and you'd be getting less rounds, to a point where the tried and true 33rd "happy stick" would be a better option.
The only other Glock compatible drum magazine on the market is the Beta C-Mag, which is twice the size and over twice the price of this drum. I would recommend finding one of these Korean made drums at a good price and at least getting one or two just for an investment, if your current state of residency allows it.

Firearms Insider Reviews – 8 Key Points

Claim to Fame:  The only 50 round drum magazine available for Glocks and Firearms that accept Glock magazines.

Target Market:  Glock owners, Keltec Sub-2000 owners, 9mm AR-15 owners

FNBs (Features & Benefits of this product):

  • Finger lever moves the follower down and takes up tension
  • 50 Rounds
  • Polymer construction with steel internals
  • Fits all Glock 34, 17, 19 & 26 models, all Generations
  • Made in Korea (imported by SGM)

What other aesthetic options or finishes are available?: Black Only

What others are saying?:

"I received this drum mag on Saturday and I have to say, WOW! It is well-built, doesn't feel cheap and the built-in loader is great! I am very impressed with this mag. I have cycled it in my G19 and KT Sub2K with no problem. I got it from Mississippi Auto Arms for $69.99 (email flash sale), they have since gone up to $129.99 but Bud's has them for $89.99." Glocktalk.com Review

"Ive put around 500 rounds through this magazine with no issues. The quality and value of this drum magazine seems to be exceptional. You might not want to use it for military applications... but for range use, screwing around or for a truck gun, this is a good option" Military Arms Channel

Price point:

I need it now! Availability:  Readily available online at Brownells or locally.

Our Rating:

Pros:

  • No winding
  • Ratchet lever makes loading easy by taking tension off the follower
  • Polymer construction makes it light as possible, still pretty rugged

Cons:

  • No windows for bullet count
  • If bolt is not open you will damage the locking slots on the drum tower
  • No steel feed lips
  • No bolt hold open when empty due to roller style follower
  • Made in Korea

Score: 7.0 Good

 

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

, , , ,

Pearce Grip Glock Plus XL Magazine Extension

, , , ,

Pearce Grip Glock Plus XL Magazine Extension Another great addition you can make to your Glock arsenal is a magazine extension. Not only does it give you extra surface area if your gorilla mits didn't quite fit on a particular Glock frame, but increases your magazine capacity. If you own a Glock as opposed to say a 1911, you probably already side with the reasoning that "more bullets are better" for the possibility of confronting multiple assailants. So why settle for the standard high capacity magazines from the factory when you can add a few more rounds by installing an "Extendo" as the kids call it?

Adding a Pearce Grip Glock Plus XL Magazine Extension is advertised to increase your 9mm magazine capacity (double stack only) by three rounds. If you want to add on to your 40SW or 357SIG magazine, you get an extra 2 rounds. If you are a very loyal Glock Fanboy and rock the 45 GAP round, you will earn just one extra bullet in the magazine.

I bought a couple Pearce extendos and added them to a 15rd and 17rd magazine. In both cases I found adding the last round (20th for the 17rd, 18th for the 15rd) was almost impossible, and could see the feed lips start to warp under the strain of forcing that 3rd extra bullet that Pearce claims you can achieve. After leaving two extra rounds in and giving the mag time to relax, I still could not add the 3rd round. It's conceivable that you could remove one or two loops from the magazine spring to give more room but I did not wish to make that commitment. The mags weren't brand new / stiff, but perhaps a mag with over 1000 rounds and years of loading/unloading would have more 'give' to add that last widow-maker.

In a Glock 22 15rd 40SW magazine I found adding the 2nd additional round was also difficult but not impossible, and feel more comfortable with the lifespan of the magazine itself when fully loaded to 17rds, and the same applies to .357SIG.

My recommendation is for Glock 19 Gen 2 & 3 owners to pick up a few, which effectively will give you the same capacity as a Glock 17 using 17 round magazines. Of course, you could just use a 17 magazine in the Glock 19 if the gap / overhanging magazine isn't a concern to you. But these extensions do give a more professional look and operational feel.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Adds capacity to Mid and Full Size Glock high capacity magazines

Target Market: Glock owners

FNBs (Features & Benefits of this product)

  • Add three rounds to the 9mm magazine capacity, two rounds to the 40SW and 357SIG and one round to the 45GAP models.
  •  Fits Glock Models: 17-19, 22-26, 31, 32, 34, 35, 37, 38
  • Made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
  • Bottom of base has 5 recessed dots for filling in with paint (mag identification)
What other aesthetic options or finishes are available?:  Black only

What others are saying?: "This magazine extension added three rounds to my gen 4 GLOCK 26 9mm magazines. Perhaps those who have had problems adding three rounds were using earlier GLOCK magazines. Two notes on squeezing three additional rounds in your gen 4 GLOCK 26:
1. Load the newly-extended magazine to maximum capacity (be it 11 or 12). Then unload and reload repeatedly until all 13 fit. This took three load/unload cycles for me.
2. My magazines have between 600 and 800 rounds through them and typically are stored loaded to capacity. Perhaps the springs are just broken in. Your GLOCK loves to be used...take it to the range!

I began to experience ftf's with this grip extension. I assume this is caused by too much tension on the spring. Decreasing to 12 rounds solved the problem. To be totally, 100% reliable for personal defense or concealed carry, I've been loading only 11 rounds in these magazines. They do provide a VERY solid feel for my small-ish hands with a CTC Laser Guard. "  Daniel Hood, Amazon User

Price Point:

MSRP: $9.95 Retail: As low as $6.99 at local retailers

I need it now! Availability: Readily available at Pearce Grips or Brownells

Our Rating:

Pros:

  • Front grip texture matches Gen 3 frontstrap texture
  • Provides pinky ledge for those with bigger hands
  • Baseplate included has slots that interface with rails molded in interior or extension for positive interface
  • Aids in retrieval from pouches for more dexterous reloads

Cons:

  • Last round of advertised capacity increase is very difficult to add without a magloader.
  • Witnessed deformation of the feed lips when installed on a Glock 17rd magazine and attempting to load 20th 9mm round.
  • Increased strain on spring

Score: 7.0 Good

 

 

, , ,

HexMag HX30-AR Magazine Review

, , ,

dsc_7423Being the host of the AR-15 Podcast, I was asked by the Powers That Be over at the Firearms Insider to take a look at a new MSR magazine offering manufactured by Hexmag. I examined the magazines that arrived and was struck by the feel of these new magazines.  They feel substantial and more durable than some of the lesser quality magazines on the market today.  I think we all know who the 800 pound gorilla in the room is when it comes to polymer magazines, and these seemed quite comparable.  Sure, they don’t have the years of experience working with polymer that the top dog has, but for a first offering, these magazines are real nice. hexid-hero_clipped2One of the chief features that seems to distinguish these magazines from the pack is the inclusion of a purpose designed interchangeable follower/latchplate system called the HexID Color Identification System.  The intent of HexID seems geared to give end users the ability to color code their magazines for quick visual differentiation when they are loaded with different ammunition types or even different calibers.  I like to see manufacturers who are willing to push the envelope and defy convention.

My time at the range with the Hexmags proved to my satisfaction that their design and manufacture was on par with my expectations for any magazine.  They were reliable and I had no difficulties that were in any way attributable to the magazines.  I don’t want you to think that I torture tested these magazines, because I didn't.  I looked through some of the promotional material and a few YouTube sources.  There doesn't appear to be anything earth shattering to indicate poor design or poor materials performance, so I didn't think I could add anything productive by undertaking my own torture tests.

One last thing that I think is important to note is that Hexmag offers a lifetime warranty on these magazines.  I think you must applaud any company that is willing to stand by the products they manufacture.

The only criticism I have about the magazines is one that has absolutely nothing to do with their quality or capabilities.  While I applaud Hexmag’s innovation and creativity, I don’t know why I need the HexID system.  It seems like a solution that was searching for a problem.  In the past I've never felt such a compelling need to differentiate my magazines that I had to seek out a DIY solution for my magazines.  Now don’t get me wrong, I would spend my hard earned money on these magazines.  I just wouldn't spend money on the different colors of follower/latchplate sets.

I still like where Hexmag was going with the design and implementation of the HexID system and to me that says a great deal about Hexmag’s potential and capabilities.  With novel innovations and a willingness to stretch envelopes, I have no doubt Hexmag has the potential to innovate in ways that will attract even more fans.  So in conclusion, I don’t think you can go wrong buying Hexmag HX30-AR magazines.

Firearms Insider Reviews ‑ 8 Key Points

Claim to Fame: Interchangeable follower/latchplate system: HexID Color Identification System

Target Market: Owners of AR-15 rifles that can use STANAG magazines.

FNBs (Features & Benefits of this product):

  • Impact Resistant Fiber-reinforced Nylon Polymer Construction
  • Raised Hexagon Pattern for Improved Manipulation
  • Tool-free Latchplate Design for Quick Disassembly
  • HexID Color Identification System
  • Lifetime Warranty
  • Made in the USA!

What other aesthetic options or finishes are available?: Color coded magazines using HexID

What others are saying?: "In sum, my impression of the HX30-AR magazine was a very positive one. While I wouldn’t suggest PMag owners selling off their stock and buying a pile of new HX30-ARs, I think I might choose the HX30-AR over the Gen M2 Pmag if I were looking to buy new magazines." ‑ Nathaniel F, The Firearms Blog

Price point:

I need it now! Availability:  The HexMag Magazine is available right now at Apex Gun Parts

Our Rating:

+-Reliable +-Reasonably Priced +-Sturdy Construction +-Good Materials +-Lifetime Warranty 

- HexID just doesn’t seem like a compelling feature

Score: 7.575

 

 

Reed's Links:

AR_banner

 

, , ,

Plinker Tactical M&P 15-22 35 Round Magazine Review

, , ,

13522574625_73813ce132_o By Michael Hart

I came across this magazine in early 2013, I was looking for extra mags for my S&W 15-22 at a local gun show, but no one had any factory mags for sale, but they did have plenty of these 35 rounders, plenty of vendors were willing to sell me as many as I wanted, but the average price of $35 made me think about it real hard.  As I walked down to the last booth, I decided I had to make a purchase because I did not want to feel like I wasted a $10 entry fee.

As I was grabbing for a couple boxes of .38 rounds and an AR15 ProMag magazine for $7.50, the vendor told me he was willing to let the Plinker Tactical mag go for $19, so I took it.

Off to the range I go, I start to load the mag and from the get go, I note to myself that this is the last magazine I will be buying from Plinker Tactical, it has no thumb assist for the spring and I was only willing to load 30 rounds due to the fear of damaging the rounds, as I write this and have visited plinkertactical.com, I notice that they must have plenty of complaint because they offer a "load assist" for $7.99.  Now to the positive, it is made of a durable polymer and I did not have any problems inserting it into the rifle and have not had a problem cycling rounds.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Plinker Tactical does guarantee this magazine 100% against breakage for life, it is a product made in the U.S.A., the website claims that it is solvent and impact resistant, and I have not tested to say other.

Target Market: This product is suited for anyone who is looking for more magazines for their 15-22.

FNBs (Features & Benefits of this product):

  • Durable
  • Cycles well
  • Fits well in the rifle

What other aesthetic options or finishes are available?: Plinker Tactical M&P 15-22 35 Round Magazine is available in black, flat dark earth, and  OD green.

What others are saying?: “I was in the market for a Smith & Wesson magazine for my M&P 15-22. I bought this one since I could not find a S&W mag. This works fine, I should have purchased more than one.” - Miffinlake, Cabelas Customer Review

Price Point:

I need it now! Availability: You can purchase this magazine from many retailer, including Cabelas, Midway USA, and directly from Plinker Tactical.

Our Rating:

+ Feeds well

- Hard to load to full capacity without the tool

Score: 5.0 Mediocre50

SEARCH