Hi-Point 995P
Pistol Review
Hi-Point firearms has come out with a new pistol. At least that is what it is technically called. I like to call it a pistol caliber pistol (PCP) since it is similar to a pistol caliber carbine (PCC). This new pistol is their 995P. The 995P is a pistol version of the Hi-Point 995 carbine, hence the “P” at the end. One could technically call it a large frame pistol.
The new Hi-Point 995P looks a lot like its bigger brother, the 995. The major differences are a shorter barrel. Now at 13.25 inches instead of the carbines 16 inches. The 995P is also threaded ½-28 to accept a 9mm muzzle device or a suppressor. Since it is now a pistol, they cut off the stock and replaced it with a picatinny rail adapter. So it looks like a short carbine, but is really a pistol.
A little more on the new picatinny rail adapter on the 995P. This rear pic rail can be used for mounting various pistol braces, or at least ones that attach to these types of rails. Built into the pic rail is a QD socket. This lets you put a sling on it and do the old school mp5 sling pushout for stability. I initially installed a Strike Industries dual folding brace. It worked fine, but because of where Hi-Point had to put the pic rail, the length of pull with the brace was too long. Fear not, Hi-Point thought about this and you can remove the pic rail by taking a screw out and unscrewing it. Underneath this pic rail are some AR15 buffer tube threads. This allows you to attach any buffer tube and pistol brace you want. I ended up with an SBA3 brace since they are adjustable for length. Having the ability for both brace mounting options, on the 995P, is a very smart idea.
Now, even some more on the pistol itself. The Hi-Point 995P comes with a plastic handguard that has a pic rail mounted on the bottom. It will look familiar if you have ever seen any of the other Hi-Point carbines. The sights also look familiar. It has a ghost ring rear with a hooded, fiber optic front post. The rear sight is a whole system that can be removed from the receiver's top rail. I removed the sight and added in a red dot. First I had an old Tasco PDP on it, with an airsoft periscope behind it. This was really just because it was a Hi-Point and I needed some InstaGram street cred. The 995P did end up with a Holosun after that. I use the red dot on a standard height AR riser and it puts it at about the right height for everyday use.
On the 995P, ammunition is fed through the 10 round magazines. These magazines worked fine for me. Hi-Point also sent some of the Red Ball 20 round magazines. Surprisingly they worked well also. The magazines are fed through the pistol grip of the 995P, just like most pistols. The pistol grip does not excite me as it doesn’t fit my hand very well. But Hi-Points aren’t known for their ergonomics.
The blow back operation of the 995P helps make it super simple to use. There is a left side charging handle that reciprocates. This handle also can be used to lock the bolt back by pushing it in toward the receiver, but only when the bolt is pulled toward the rear. The 995P will also lock back on an empty magazine. After the bolt locks back on that empty magazine, you must first drop the magazine, insert a new one or don’t, and then pull back on the bolt handle to release the bolt.
After having reviewed Hi-Point’s 3095 carbine, I expected the 995P to be just as fun. I was correct. The 995 is so much fun to shoot and it is accurate too. There is very little recoil, probably due to its weight being around 6 pounds. The iron sights are pretty good and super easy to use. However, a red dot makes the 995P even better. I ran a ton of rounds through the 995P without any problems. From 115 grains up to 147 grains. It just chugged along, but I kind of expected that. Having the ability to use whatever type of pistol brace you want is also a huge win for the 995P. Or, just hook a single point sling on it and use it that way. I even put my subgun suppressor on it. Yes, it is quiet with subsonic ammo. The 995P just ate it all without complaints. It really is just a fun range “pistol”. If you wanted a cheap short barrelled rifle, you could pay the $200 tax stamp and throw a stock on it. You would still only be out around $500 total.
If you are in the market for a “large” frame pistol, the Hi-Point 995P might be just what you are looking for. It is inexpensive and a whole lot of fun. The brace mounting system is top notch and gives you endless possibilities. But really, my favorite part about the Hi-Point 995P is how much fun it is just plinking at the range. To check it out, head over to Hi-Point.
Firearms Insider Reviews - Key Points
Claim to Fame:
Large frame 9mm pistol with “options”
Target Market:
Anyone wanting a less expensive 9mm pistol caliber pistol
Features, Benefits, and Specifications of this product:
Barrel length: 13.25" Standard
Back Plate: Accepts standard buffer tube
Rear Picatinny Rail
Weight: 6.1 LBS.
Capacity: 10-round mag standard
Overall length: 20.75"
Rear Sights: Ghost Ring Aperture
Finish: Black powder coat
Front Sights: HiViz light pipes fiber optics
Threaded ½-28 with thread protector
Lifetime warranty
What other aesthetic options or finishes are available?
.45acp or 10mm
What others are saying?:
Nothing found as of publishing
Link to other reviews:
Price point:
MSRP = $379.00
Retail = Around $300
I need it now! Availability:
Guns.com, KYGUNCO, or your local gun shop
Our Rating:
Pros:
Configurable
Picatinny and buffer tube options
Short length
Made in USA
Price
Cons:
Trigger pull
Ergonomics
10 round capacity magazines
Score: 7.50 Good
Favorite Link: Hi Point 3095 review
