Optics

Primary Arms SLx 1-6x24

Primary Arms SLx 1-6x24 SFP ACSS Aurora Gen IV

  In for review is something I think is the coolest thing since sliced bread, electric car windows and air conditioning. As you can guess we have an optic from Primary Arms (PA). This is their SLx 1-6x24 second focal plane scope. This is a Gen 4 version of their Low Power Variable Optic (LPVO). Primary Arms sent this to me and I have been sitting on it until I had just the perfect rifle to put it on. After some soul searching, I bought a Mossberg MVP Patrol rifle in .300 black out (BO). This scope is made for the .300 BO or 7.62x39 cartridges. 

  A little about the optic before we get into how it performed. It has their illuminated ACSS reticle. This optic was designed with the carbine user in mind. It has an integrated throw lever, clear glass, and a BDC reticle. It also has a 30mm tube, click values of 0.1 mil, and a generous eye relief of 4 inches. It runs off of a CR 2032 battery and the magnification is 1-6 power. If you run night vision it will work with that as well. It has 120 mils of adjustment for windage and elevation. The turrets are capped and low profile. 

  So mounting this optic is pretty straight forward, especially if using one of Primary Arms mounts. I adjusted the reticle to align with my cant and eye relief. The first thing I noticed was the clarity of the glass. The second was the ease of adjustment of the throw lever. Adjusting the brightness is easy and tactile. There are 11 settings of brightness and 2 are night vision. The field of view at 1x is 120 feet at 100 yards and at 6x is 20 feet.

  Now on to the reticle, this is where things got interesting and fun. The optic comes with two manuals, the first is your basic setup and the second is how to use the reticle. You will notice that when you first look into the optic, there is an illuminated upside down V or chevron. The Aurora reticle is a BDC reticle for the .300 BO and has a ranging reticle out to 600 yards. Now I have no notion of trying to shoot my .300 BO out that far, but it is nice to be able to zoom in and range your target based on a 5’10” person. The stadia marks are easy to read and are clear at any magnification. If you read the manual, it will help you understand how the reticle works. 

  The reticle is based in 25 yards increments, assuming you dialed it in at 50 yards. It has a chart in the manual with all the common loads from most of the major ammo makers, both supersonic and subsonic. If you don't happen to have one of these particular loads, it is still pretty easy to get on target and paper. I dialed the PA 1-6 in at 50 yards. I ran a bunch of Ammo Inc 162 gr loads through the bolt gun and had a suppressor on the end of it. It was an absolute tack driver at 50 yards and the optic made it very easy to see the holes at that distance. At 100 yards picking up an 18” target was easy and you could definitely see the bullet impacts. The overall clarity was great. I went to subsonic rounds next. I used the chart to re-zero my optic to what the chart indicated, and it was spot on to within an inch or so out to 100 yards. I figure for a 300 blackout, that is pretty good shooting with subsonics. So if you use the chart in the manual, you will be close on target. This also depends on your barrel length and so on. 

  For the overall quality of the Primary Arms scope, and user ability, I have to say that this is probably one of the easiest and most natural scopes you can use. Now I did most of my shooting on 6 power and from a bench. I did shoot some at 1 power standing. I intend to do more this way because this is going to be my new hunting rifle here in Tennessee. The optic lends itself to be friendly close up and at hunting distances, especially for myself in a thicker wooded area. I also believe this optic would be great on a MSR. You can run it like a red dot or you can shoot for distance, if you so choose. With the right ammo, the 300 blackout is capable of 300 yard shots with this optic. With the ranging ability of the Primary Arms SLx 1-6 gen IV, it would be just fine for that purpose. 

Firearms Insider Reviews - Key Points

Claim to Fame:

LPVO with a reticle specifically made for the 300 black out or 7.62x39 rifles

Target Market:

Those wanting a dedicated .300 blackout or 7.62x39 LPVO

FNBs (Features & Benefits of this product): 

  • Fully Upgraded Optical System

  • Integrated Magnification Throw Lever

  • ACSS Aurora 7.62 Yard Reticle

  • Magnification: 1x – 6x (Min – Max)

  • Focal Plane: SFP

  • Objective Lens Diameter: 24mm

  • Exit Pupil: 10.6mm – 3.8mm

  • Eye Relief: 4 in.

  • Total Windage/Elevation Adjustment: 120 MOA

  • Field Of View @100 Yards: 120 ft. – 20 ft. (Low – High)

  • Illumination: Red, 11 Illumination Settings

  • Click Value: 0.1 MIL

  • Length w/o Lens Covers: 10.4 in.

  • Weight w/ Included Battery w/o Lens Covers: 17.9 oz.

  • Scope caps included

 What other aesthetic options or finishes are available?

Various reticles

What others are saying?:

GREAT OPTIC FOR A REASONABLE PRICE

by Noah S.

Have a little over 2100 rounds on this optic between four different shooting sessions because I really wanted to give it a good test for the average shooter. The glass is very clear and crisp compared to most other optics of this price range. The reticle brightness settings give you a good range of options for different weather and daylight conditions. It’s ran right along side my ACOG also purchased from Primary Arms. Obviously I’m not betting my life on this optic that same way I would an ACOG, but if you need an optic that works and is affordable to the average shooter and is made by a company that stands behind its, work this is it. This isn’t a paid add and is my honest review for the short time I’ve had it.

GREAT VALUE

by Joe

Bought this to go pig hunting with a .300 AAC BLK. Worked like a champ. I dropped it on the ground and no loss of zero. Rugged scope for the price. Illumination works well. The reticle could be a bit larger but that is personal preference. Overall I am very pleased and can recommend it.

Link to other reviews:

Pew Pew Tactical

Price point:

MSRP = $339.99

Retail = Same, but PA runs sales sometimes

I need it now! Availability:

Primary Arms or Your Local PA Dealer

Our Rating:

Pros:

  • Quality made

  • Lifetime warranty

  • Easy of use

  • Clear glass

  • Great reticle

Cons: 

  • None

Score: 9.00 Great 

Gideon Omega

Gideon Optics

Omega review

  I was looking for a new pistol mounted red dot to install on my Rost Martin. I knew I wanted a larger window size reflex sight for that pistol. So I did what any good reviewer would do and hit up the good people at Gideon Optics. Gideon had just what I was looking for in their Omega series. When they asked which version I wanted to review, I said the green dot only version. So a few weeks later I received it. That is where the story takes a twist.

  The Gideon Omega arrived at the perfect time. I had just received a lightweight 10/22 kit and it needed a lightweight dot. So even though I had intentions of mounting the Omega on the Rost Martin, it proceeded to get mounted on the 10/22 with the CP Firearms Dragonfly kit. The Omega was perfect for it. Its large window lets you see the dot quickly on this little rifle. Plus the Omega came with a pic rail adapter already installed, so all I had to do was tighten it on the rail. The Gideon Omega has an RMR footprint so it will fit on a ton of pistols cut for an RMR optic. Which is exactly what I originally had planned for the Omega.

  Gideon Optics has hit the ground hard with the Omega. It is their larger window RMR footprint reflex sight. The window size is 0.88 inches tall x 1.06 inches wide and round shaped with a flat on the bottom. I found it extremely easy to pick up the dot in the Omega. Probably because round objects draw the human eye to the center. Having an RMR footprint makes the Omega very versatile. There are so many mounting options for it, either direct or some sort of picatinny mount. Even offset style mounts can be had with RMR footprints.

  For this review, I asked for a green dot version of the Gideon Omega. It also can be had with a red dot, a red circle dot, or a green circle dot. The dot versions have a 3 moa sized dot and the circle dot versions have a 45 moa outer ring with a 3 moa dot inside the ring. I chose the 3 moa green dot because green is usually clearer for me. I also am not a fan of circle dot reticles on pistols, even though some people love them. The dot is bright enough to see on a hot summer day with zero clouds in the sky. The Omega has 10 brightness levels in case you need to turn the brightness down, 2 of those are night vision compatible. I am also a big fan of being able to set the brightness where I want it. I am also pleased with the clarity of the green dot. It just does not star out like a lot of red colored ones do for me. The dot was easy to pick up and super fast on that little lightweight 22.

  Auto on and off is a feature every new optic should have. The Gideon Omega has this auto on/off feature. Essentially, when you move the sight, it automatically turns back on to whatever brightness setting you have it set at. Then, after sensing zero movement, it turns off after 225 seconds, or just under 4 minutes. The Omega does have a twist to this auto on/off. If you leave the Omega sitting for 12 hours, it will turn off completely to save battery life. I have a love/hate relationship with this. Since I use it on a 22 rimfire rifle, this feature is great. But if you want this optic for a bedside firearm, the auto on might not work when you need it. Mainly because the gun will probably not get moved enough to keep the auto on/off working. For duty use, it is probably fine because the movement of it being on you will keep the sight from turning off. Something to think about. Gideon does have other optics without the 12 hour off feature, so one can always check those options out.

  Another feature I like on the Omega is the top load battery. With the top load battery, you will not have to take the sight off to change it. Gideon gave the Omega a CR1632 battery. They spec the battery life at “up to 50,000 hours”. So if you leave it on the brightest setting, I do not know how long the battery will last. But I really do not think anyone has to really worry about the battery life.

  The Omega is super light. Gideon states that it weighs 1.8 ounces with the battery. This is one of the reasons I decided to mount it on that lightweight 10/22. As far as physical size, it is 2.06 inches long x 1.21 inches wide x 1.25 inches tall. So even though it has a good window size, the Omega is still small. 

  Sighting in the Gideon Omega was super easy. It was almost centered up after mounting. I even sighted it in right before a local steel challenge competition. I set a target about 15 yards away and went to town. Adjustments on the Omega have actual clicks. Yes, they are tiny sounds and feel, but at least it has them. I am a fan of clicks on these micro optics. If it does not have them, how do I know how far I actually moved the adjustment screw? Thank you Gideon for putting actual clicks in the adjustments.

  I was really happy with how the Gideon Omega works. I know it will handle the recoil of a pistol, at least based on my previous experiences with other Gideon Optics. I was surprised at how well I liked the Omega on a small rifle. It performed fantastic. Yeah, I am not a fan of the 12 hour auto off function, but since I have it on a competition 22, it does not really matter. Would I recommend it to someone? Yes, it is a fantastic green dot reflex optic. 

  Sometimes life throws you a curveball and you hit it out of the park. I had not planned on mounting the Gideon Omega to a 22, but I did. The Omega works so well on that 22 that I am not taking it off to install it on a pistol. The green dot is clear and a great size. Gideon is really the one that hit the home run with the Omega. I love the size and features it has. If you want to check it out, head over to Gideon Optics.

Firearms Insider Reviews - Key Points

Claim to Fame:

Large window reflex sight mainly for pistols, but also at home on rifles

Target Market:

Anyone wanting a quality large window red dot at a fair price

Features, Benefits, and Specifications of this product:

  • Magnification: 1x

  • Lens Dimensions: 22.3mm tall x 27mm wide

  • 7075-T6 aluminum body

  • Elevation/Windage adjustment range: 45 MOA (Total 90 MOA)

  • Click Value: 1 MOA per click

  • 3 MOA Dot

  • Parallax Free: Beyond 33 yards

  • Red Dot Brightness Setting: 10 levels (8 visible, 2 NV compatible)

  • Power Supply: 1x CR1632 3V Lithium battery

  • Battery life: 50,000 Hours

  • Top load battery

  • Auto Wake/Sleep: 225 Seconds after no movement, Deep Sleep after 12 hours

  • Shockproof & IPX7 Waterproof

  • Dimensions: (LxWxH) 52.5mm x 30.7mm x 31.7mm

  • Weight (with battery installed): 1.8 oz (approx.)

  • RMR footprint

  • Picatinny mount included

  • Lifetime Warranty

What other aesthetic options or finishes are available?

Red Dot only, Green Circle Dot, or Red Circle Dot

What others are saying?:

The Gideon Omega does exactly what it needs to. It provides a big window, competition style optic that performs. Shake-awake type functionality is welcome and is essentially the only "advanced" feature an optic like this really needs. I also appreciate the easier to actuate buttons versus some other brands. This is a tradeoff of course as you could get some accidental presses in some situations, but it suits my preference for fast adjustment. After my first 200 rounds with the Omega I've noticed zero issues and will be running this solution for competitions going forwards (and saving hundreds in the process).

Link to other reviews:

The Armory Life   

Price point:

MSRP = $229.99 discount code “GGR”  knocks it down to $206.99

Retail = $195.99 at JSD Supply   

I need it now! Availability:

Gideon Optics or JSD Supply

Our Rating:

Pros:

  • Large window

  • RMR footprint

  • Clear dot

  • Auto on/off

  • Top load battery

Cons:

  • 12 hour Deep Sleep mode

Score: 8.50 Great

Favorite Link:  Gideon Judge Review

Gideon Optics Judge

  Another red dot sight manufacturer has entered the arena. This new sight company is Gideon Optics. Gideon has come on the market strong with an assortment of micro and mini red, and green, dot sights. I’ve known the owner of this new optics company for some years now, so I am excited to get into the “Judge” red dot that they sent out for review. The Judge is Gideon’s micro red dot reflex sight and uses the RMSc mounting footprint.

  When the Judge arrived, I was excited to mount it up. Part of the reason I was excited is because I was looking for a red dot for my G43ish carry gun. The Judge fit that bill nicely as my G43 slide was already cut for a RMSc style sight. The other half of the excitement came from the Judge's auto on/off ability. In today's market, I see no reason why a red dot shouldn’t be auto on/off. Gideon also includes 4 different pairs of mounting screws. So you should have something that fits. More important, in my opinion, is that Gideon also includes a sealing plate with the Judge. This is important since the Judge uses a bottom load battery. The sealing plate does just that, it seals the battery from moisture and dust.

  The Judge has an option for either a red or green dot. I chose the red dot because my eyes just seem to pick it up faster. The Judge uses a 3 MOA dot size, which is a good size for all around use. If you have an astigmatism, like I do, the dot will probably look larger because of the “flare”. Don’t worry, the Judge’s dot is fairly clear in pictures, so I know it’s me and not the sight. To adjust the 10 brightness settings, the Judge has a brightness up button on the left side and a brightness down button on the right side. I actually like this better than the red dots that have both the up/down on the same side. There’s just no doubt which button I am pushing. With the Judge, you get 90 MOA of total adjustment for windage and elevation. More importantly is that the Judge has actual clicks for the 1 MOA adjustments. These clicks are not something you find in competitors' products, but the Gideon Judge has them.

  Construction of the Judge is pretty sound. You get a 7075-T6 aluminum housing, not the less durable 6061. It is also waterproof to 1 meter for 30 minutes plus. Let’s just say that I have not broken it yet. The Judge also only tips the scales at around 0.6 ounces with the 2032 battery. Probably more important to the user, is that the judge has a window size of 16x21mm. This size is really nice for such a small reflex sight. I was able to get a good sight picture fairly quickly. Essentially, the window is big enough to make it easy to find the red dot. 

  The Gideon Judge just runs. I can’t seem to get the Judge to stop. It has given me zero problems since day one. It’s bright with very little tint to the lens. It has held zero through all my abuse. Granted, I didn’t drop it on concrete, but I also don’t want to actually break it just to break it. I love the click adjustments. In all, I have had a good shooting experience with the Judge.

  If you are in the market for a micro red dot, definitely give the Gideon Judge a look. Maybe even judge it compared to others in this market space. It has some great features at a respectable price. I might even give it style points for its looks. Even if you are looking for a different style of red dot, Gideon Optics might have what you want, so go check them out.

Firearms Insider Reviews - Key Points

Claim to Fame:

Small Red or Green dot that fits RMSc slide cuts

Target Market:

Anyone wanting a small red or green dot optic

Features & Benefits of this product:

  • Magnification: 1x

  • Lens Dimensions: 16mm tall x 21mm wide

  • 7075-T6 aluminum body

  • Elevation/Windage adjustment range: 45 MOA (Total 90 MOA)

  • Click Value: 1 MOA per click

  • Circle Dot Reticle: 3 MOA Dot

  • Parallax Free: Beyond 33 yards

  • Red Dot Brightness Setting: 10 levels (8 visible, 2 NV compatible)

  • Power Supply: 1x CR2032 3V Lithium battery

  • Run Time: approx 40,000 hrs

  • Auto Wake/Sleep: 225 Seconds after no movement

  • Shockproof & IPX7 Waterproof

  • Dimensions: (LxWxH) 41mm x 25mm x 24mm

  • Weight (with battery installed): 0.6 oz (approx.)

  • 1913 picatinny rail mount and screws

  • T10 tool

  • Adjustment tool

  • Sealing plate

  • Cleaning cloth

  • One pair each of the following mounting screws: M4 x 0.7 x 10mm, M4 x 0.7 x 8.6mm, M3.5 x 0.7 x 10mm, M3 x 0.5 x 12mm

What other aesthetic options or finishes are available?

Green Dot Version

What others are saying?:

Dan @ OpticsPlanet

Very happy

I purchased this for my PSA 5.7 Rock. Could not be happier clear Len and crisp dot.

Link to other reviews:

Caleb Downing on YouTube   

Price point:

MSRP = $229.99

Retail = Same but use code “GGR” for 10% off at Gideon Optics

I need it now! Availability:

Gideon Optics or JSD Supply

Our Rating:

Pros:

  • Bright Dot

  • Actual click adjustments

  • Auto on/off

  • Includes Sealing plate

  • Includes various mounting screws

Cons:

  • Slightly fuzzy dot

  • Bottom Load battery

  • Only a 3 yr warranty

Score: 7.50 Good

Favorite Link:  Patmos Arms Judah slide review

Primary Arms SLx 3-18x50 Gen 2

  Quality optics have become affordable for most shooters in the last few years. One no longer needs to spend $1000, or more, to get a clear quality optic. Primary Arms has been aiding us shooters with these types of optics. Their new Gen 2 SLx 3-18x50 FFP is one of those. This optic has features that should make it cost twice the price. 

  The Gen 2 SLx 3-18 is packed with features. Coming in first is its First Focal Plane (FFP) reticle. Yes, this $500 optic has a FFP Christmas tree style reticle. So when you zoom in, all the reticle’s MIL marks stay the same. This allows you to hold over for bullet drops, or wind, at any reticle setting. This particular optic uses Primary Arms’ ACSS Athena BPR Mil reticle. I won’t go much into the reticle’s design as it uses MIL’s in a very useful pattern. But, the reticle is illuminated to help one see better in low light. It’s pretty bright for this size of optic. This ACSS reticle also uses a small center chevron, think triangle, for aiming. Most optics like this just use a small dot. The top point of the chevron can be used for very precise shots, more so than if one were to use an optic with a small center dot. The other nice aspect to this reticle is its built in ranging ladder. The ladder is in the upper right hand portion of the optic. This puts it out in the part of the reticle that is seldom used. I really like how Primary Arms designed the ACSS Athena reticle. It is easy to use, even for someone like me that is used to using a MOA reticle. I even mentioned to Primary Arms that they were starting to convert me to MIL reticle scopes. Part of that comment was due to the SLx 3-18x50.

At 18x, Tower Light is approximately 350 yds away. Light is also 15” wide for ranging purposes.

  Since I was talking about the reticle, let's go into the optics themselves. This SLx 3-18 gen 2 is exceptionally clear. This is why I say it far exceeds its class. I had zero problems with the clarity, even at its full magnification of 18x. I could easily make out 17 HMR holes in targets at 100yds. The crispness of the glass is also really good, though I did find it to drop off a little at longer ranges and at higher magnification, but it never caused any problems. I did find the parallax adjustment to be a little touchy. At least when focusing the parallax adjustment on targets between 200-400 yards. They were the hardest to get focused. Other ranges didn’t seem to be as touchy, even the lower ranges like 15-100 yds. I will give the SLx credit for having a parallax adjustment that goes from 10 yds to infinity. Other than those minor issues, the SLx 3-18 gen 2 has great glass for the money.

  The function of the SLx 3-18x50 gen 2 has some outstanding features also. My absolute favorite is that this optic has a true zero stop on the elevation turret. Once you find out where your zero is, just set the stop and you will never have problems finding your zero again. No matter where you adjust to, just turn the back down until it stops, you are now at your zero setting. The turrets have been upgraded over the first gen SLx 3-18. They are larger so you can get a better feel on them. This also makes them easier to turn. These turrets also have fairly good clicks to them. You can feel and hear them. The elevation turret is a target style and not capped. The windage turret is capped….unless you want it to be a target style turret. Primary Arms includes a target style turret that you can replace the capped one with. So essentially you have the best of both worlds. I typically don’t dial for windage, so I left the turret in the capped version. One other feature, that Primary Arms added to the SLx 3-18 gen 2, is their changeable throw lever for the magnification ring. Instead of being stuck with whatever the optic company gives you, Primary Arms gives you options. The throw lever, that comes installed, is fairly tall and makes it easy to adjust magnification. But, if it’s not your thing, just take it off, or get one of the other throw lever options.

  I installed the SLx 3-18x50 gen 2 on my semi-precision 243. Being that the 243 is not your standard 1000 yd cartridge, more of a 800 yd one, I thought this magnification range would be a perfect fit for it. All I can say is that it worked out great on this rifle. Don’t get me wrong, the SLx 3-18 gen 2 is perfectly capable of going out to 1000 yds clearly. My eyes are old and like a little more magnification when reaching out farther. A while back, 10x was adequate for 1000 yds. I view a 3-18 as more of a mid to long range optic. If I was looking for something in the longer range category, I’d look into the Primary Arms 5-25x56.

  Primary Arms did a great job designing the SLx 3-18x50 FFP gen 2. Basically it reaches above its pay grade and into the realm of optics that cost twice its price. It has good optical clarity and a top notch reticle. The SLx 3-18 gen 2 also functions extremely well with those large turrets and zero stop. It is a little on the heavy side, but for $500 you can’t go wrong. So if you think you might need a top notch, value priced optic, in the 3-18 power range, do yourself a favor and check out the SLx 3-18x50 gen 2 from Primary Arms

Firearms Insider Reviews - Key Points

Claim to Fame:

First Focal Plane mid-power optic with a great feature set

Target Market:

Precision shooters and hunters

Features & Benefits of this product:

  • CR2032 3V Lithium Battery

  • Eye Relief: Low: 3.5in. / High: 3.9in.

  • Field View at 100: Low: 35ft. / High: 5.9ft.

  • First Focal Plane

  • Red Illuminated Reticle with 6 brightness levels

  • Length: 13.6 in.

  • Magnification: 3X - 18X

  • ACSS ATHENA BPR MIL Reticle

  • 0.1 Mil Click Adjustment Value

  • Total Elevation Adjustment: 100 MOA

  • Total Windage Adjustment: 64 MOA

  • 30mm Tube Diameter

  • Weight: 32.04 oz

  • Zero Stop Elevation Adjustment

  • Lifetime Warranty

What other aesthetic options or finishes are available?

Apollo 6.5cr/224v and 308/6.5g reticles     

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Hunt Fish Shoot on YouTube  

Price point:

MSRP = $499.99

Retail = Same

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Clear Glass

  • Price

  • Zero Stop

  • Larger Turrets

  • Extra Dial Turret for Windage

Cons:

  • Parallax adjustment is touchy

  • Heavy

Score:  8.00 Great

Hawke Vantage 30 1-8x24 Fiber Dot

 It seems like everyone is making quality Low Power Variable Optics (LPVO) nowadays. The Hawke Vantage 30 1-8x24 Fiber Dot falls into this category nicely. This particular LPVO uses a new Fiber Dot, second focal plane reticle. The L4A illuminated Fiber Dot reticle is what makes this optic shine above most others in its class.

  As one can guess, the Hawke Vantage Fiber Dot comes with a bunch of features. It uses a 30mm tube to help you get a decent field of view at 8x. Of course it also has all those normal features like multi-coated optics, fast focus eyepiece, capped turrets, and a zero reset on the turrets. The adjustment ring also comes with a removable throw lever, which I actually like because it’s not super tall. The Hawke Fiber Dot also weighs in a little lighter than some of its competition with a weight of 16.5 ounces. To go along with that, it also comes in at an overall length of 10.5 inches, which is right where most of these LPVO’s fall. Lastly the Hawke Vantage Fiber Dot has a respectable eye relief of 3.8 inches. I found the eye relief to be somewhat forgiving at 8x, which surprised me a bit. At 1x I didn’t even notice it.

1x at around 5 yds

200yd steel at 8x

  Now that the standard specs are out of the way, let’s talk about the Fiber Dot reticle of the Hawke Vantage 1-8x24. With the Fiber Dot reticle, Hawke took their standard L4A dot reticle and gave it fiber optics. Yes, it still uses a battery for illumination and has 11 brightness settings. But, by adding in fiber optics, the center red dot of the reticle is now bright enough to be seen on the brightest of sunny days. This gives the shooter the ability to use the Vantage Fiber Dot as you would a standard red dot. Just turn the scope down to 1x and that center fiber dot just glows bright, just like a red dot. It glows bright at 8x too, but I’m using it at 1x for fast, close up, shots. Okay, maybe not exactly like a red dot, since the reticle still has crosshairs in it and it is etched into the glass. Being etched allows it to not “starburst” out, like a normal red dot would do for those of us with an astigmatism. Those crosshairs will also help draw your eye to the center dot and improve shot to shot time. The crosshair is also a 30/30 type reticle, at least when the magnification is adjusted to 4x. This means the thin stadia lines are 30 inches from the center dot out to the thicker outer post. This gives you a way to measure distance. 4x seems to be a weird place to make the reticle measure correctly, as most manufacturers do it at full magnification for a second focal plane optic. It works, and I doubt most people are using a 30/30 LPVO to range with. But it is there if you need it. I will also mention that the optic is super clear to look through, even at 8x. 

  The Hawke Vantage 1-8 Fiber Dot works very well. I didn’t have any problems with the LPVO whatsoever. I really like that Hawke is using this fiber optic technology to make reticles brighter. The center illuminated dot is great. That center dot is not as bright as a true red dot, or some of its competition, but it is very usable in bright sunlight. Being able to crank that thing up to 8x is really useful for hitting farther away targets, or for target identification. Plus, I was really impressed with the clarity at 8x. The center dot is also fine enough that it is easy to make those precise shots when needed. I did like the fact that the Vantage is a little bit lighter than other manufacturers 1-6 and 1-8’s. The magnification ring is also super smooth and doesn’t take a bunch of force to turn, making it much easier and quicker to adjust. I was also very pleased that the turrets had decent clicks to them when making adjustments. They are also capped, so you won’t knock off your zero when trekking through the woods. 

  I’ve been very pleased with the Hawke Vantage 30 1-8x24 with the L4A Fiber Dot reticle. As mentioned, it has super clear glass. But, even better is the ability to have a bright red dot type reticle that can be seen in bright sunlight. The smooth adjustment ring and forgiving eye box make it really nice to use. If you are looking at an LPVO, where the illuminated reticle can actually be seen in sunlight, go take a look through the Hawke Vantage Fiber Dot and see if it’s what you like.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Daylight bright center red dot reticle in a LPVO

Target Market:

Those wanting a daylight bright reticle in a SFP LPVO

FNBs (Features & Benefits of this product):

  • Magnification: 1 - 8x

  • 30mm Scope Tube

  • 11 Levels - Red illumination

  • Field of View: 115ft @ 1x -14.4ft @8x both at 100yds

  • Eye Relief: 3.8in

  • Capped Turrets

  • ½ MOA windage and elevation adjustment clicks

  • 210 MOA adjustment range

  • Fast Focus eyepiece

  • Power Selector: Knurled Posi-Grip with Removable Zoom Lever

  • Fully Multi-Coated - 11 Layers

  • SFP (Second Focal Plane)

  • Length: 10.5″

  • Weight: 16.5oz

What other aesthetic options or finishes are available?

Different Reticles

What others are saying?:

Nothing found as of publishing

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $559.00

Retail = $499.99 at OpticsPlanet  

I need it now! Availability:

Hawke Optics or OpticsPlanet

Our Rating:

Pros:

  • Simple SFP reticle

  • Bright center dot

  • Smooth adjustment ring

  • Lightweight

  • Clear glass

Cons:

  • Reticle accurate at 4x

  • Price compared to others in this market

Score: 8.00 Great

Favorite Link:  Endurance Red Dot review

Primary Arms SLx 1-6x24 ACSS NOVA

  Primary Arms has come out with a new Low Power Variable Optic in their SLx line, it’s the 1-6x24mm SFP Gen IV with the Illuminated ACSS Nova Fiber Wire Reticle. The difference between this new 1-6x24 LPVO, and others, is its new fiber wire reticle. The fiber wire produces an actual daylight bright center red dot. The SLx 1-6x24 Nova reticle also has a bunch of other upgraded features when compared to the SLx gen 3's. Let’s go check it out. 

  This new SLx 1-6x24 comes packed with features. Of course it has 1 power magnification so you can use it like a red dot. Or you can crank it up to 6 power to identify and engage targets at longer distances. To change the magnification, Primary Arms has upgraded the throw lever to their new dovetail style. This new throw lever can be taken out and swapped for different heights, including a fold down style. The magnification ring moves about 180 degrees between 1x and 6 x, which is nice. The SLx 1-6 is still a second focal plane optic, but now has different reticle options, including the Nova Fiber Wire reticle. To zero in the reticle, the SLx 1-6 uses capped turrets that adjust in 0.1 MIL increments. The turrets have a good audible clicks to them. There are also 3 tiny set screws to loosen and set those turrets to a known zero position. The scope weighs in at 17.9 ounces and is 10.4 inches long, which is a good balance for this style of optic.

  It’s time to talk about the SLx 1-6’s Nova fiber wire reticle. This Nova reticle is one of the reasons the Gen 4 SLx shines. Using a fiber optic wire allows the Nova reticle to have a center illuminated red dot. I used to complain when companies would say “daylight bright”, not anymore. The red dot inside the SLx 1-6 is BRIGHT. Not only can you see it in direct bright sunlight, but I'm pretty sure it can be seen while aiming it at the sun, but I wouldn’t recommend trying that. The dot is bright enough that it also doesn’t wash out when using a weapon light, a big plus in my book. Because the SLx is an etched reticle, the red dot does not starburst out for those of us that have an astigmatism, something I can’t say for normal red dots. The illuminated dot size measures 0.6 MOA at 1x and 3.6 MOA at 6x. Brightness for the center dot is adjusted on the left side of the scope. It has 11 levels of brightness with only one off position. It is not night vision compatible, the dot is just too bright at level 1 for that. Also included in the reticle are MIL hash marks. The vertical crosshair’s marks are at 1 MIL intervals. There are narrower 0.5 MIL subtension marks between the large 1 MIL ones. These 1 MIL marks decrease in width as you move down the crosshair. This is to estimate a 18” target’s width to help determine what range the target is at. Being a SFP optic, these stadia marks only are accurate at 6x. The horizontal crosshair has marks for wind or travel speed. These are 3,6, and 9 MPH as you move out away from the center dot. The Nova reticle is a great multi-purpose reticle that can range targets or be used as a red dot.

  Since the Primary Arms SLx 1-6x24 is now on the fourth generation of upgrades, this means the user gets upgraded glass. This upgraded glass gives the SLx fantastic clarity. To my eye, it compares to the clarity of my GLx 1-6, which is the next higher level of optics in the Primary Arms optics line. Eye relief on the SLx is stated at 4 inches, but it is very forgiving. The eye box is also pretty good for a scope in this class range. These two specs actually make it very easy to find the optic when shouldering the rifle.  

  I mounted up the SLx 1-6x24 Nova fiber wire on my purple AR15. For this particular rifle, the SLx is great. It is super clear and easy to pick up the reticle. That fiber wire makes the center dot so bright that I can actually use the scope like a red dot at 1x, in bright sunlight. The dot is so bright that I had to turn the brightness way down to get a good picture of the reticle, if that tells you anything. The turret adjustments give me good clicks, so when I turn them, I can tell when they moved. My only complaint about the SLx is the throw lever. It is too stiff for my liking. Even though it’s stiff, the throw lever’s movement is super smooth.

   If you are even remotely looking into getting a LPVO, the Primary Arms SLx 1-6x24 Nova reticle needs a look. The glass clarity is great. The reticle is top notch for a “one optic” rifle. Plus that red center dot has got to be one of the brightest of any LPVO in this price range. I would encourage you to go take a look at the SLx 1-6 Nova from Primary Arms. It might be one of the best LPVO’s in its price range

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Low power variable optic with a super bright red dot

Target Market:

Those wanting a LPVO that is actually daylight bright 

FNBs (Features & Benefits of this product):

  • Integrated Magnification Throw Lever

  • ACSS NOVA Fiber Wire Reticle

  • Battery Life: Up to 500 hours

  • Magnification: 1x – 6x

  • Second Focal Plane (SFP) 

  • Objective Lens Diameter: 24mm

  • Exit Pupil: 10.6mm – 3.8mm

  • Eye Relief: 4 in.

  • Total Windage/Elevation Adjustment: 120 MOA

  • Field Of View @100 Yards: 120 ft. – 20 ft. (Low – High)

  • Illumination: Red, 11 Illumination Settings

  • Click Value: 0.1 MIL

  • Length w/o Lens Covers: 10.4 in.

  • Weight w/ Included Battery w/o Lens Covers: 17.9 oz.

  • Lifetime Warranty

What other aesthetic options or finishes are available?

Different Reticles

What others are saying?:

5/5 Stars at PrimaryArms.com

THE NEW STANDARD FOR BUDGET LPVO'S

Absolutely lives up to the hype, punches well above its price point. Yeah, it's going to get compared a lot to the PST Gen 2, and I can honestly say the overall glass quality and image/FOV/Reticle, and illumination are frankly better than the Vortex. Still doesn't quite match the Vortex in build quality or external controls, and the eyebox is a tad less forgiving, but this Nova scope is hands down the best LPVO on the market under $500.

Link to other reviews:

Lynx Defense

Price point:

MSRP = $339.99

Retail = Same, but Primary Arms runs sales often

I need it now! Availability:

Primary Arms

Our Rating: 

Pros:

  • Super brightly lit dot in center of reticle

  • Removable and changeable throw lever

  •  Lightweight 

  • Mil style reticle

Cons:

  • Second focal plane

  • Stiff throw lever

Score: 8.50 Great

Favorite Link:  Timber Creek Enforcer Review

Primary Arms SLx 4-16x44 FFP

  Recently Primary Arms updated the SLx 4-16x44. This update gave the feature rich, SLx 4-16 some new reticles. One of those is the ARC-2 MOA, a simple, yet effective, illuminated reticle. I was excited to put this optic through its paces and it did not disappoint. Primary Arms’ SLx line is what I like to call performance packed optics at a price everyone can afford.

  To put it simply, the SLx 4-16x44 FFP has magnification of 4x to 16x. It has a 44mm objective lens and a 30mm tube to help gather as much light as possible. Magnification is adjusted with a ring back by the eyepiece. The ring has a raised “fin” that can be removed if you don’t like it. It has a side parallax adjustment that goes from 20 yds to infinity. On the end, of said parallax adjustment, is the illumination ring. It has 11 values to illuminate the ARC-2 reticle. The lowest 2 settings are night vision compatible. The highest setting is “daylight” bright. I can actually see a little bit of red illumination in bright sunlight, something I can’t always say when things are “daylight bright”. The adjustment turrets on the SLx are of the tactical style. They are not capped, nor can they be. They have a pretty good tactile feel for the 1/4 MOA clicks, but are not very audible, if at all. These turrets are resettable to zero with the supplied allen wrench. No zero stop, but I can’t knock a $300 scope for that.

  Now that you have a general rundown of the optic, it’s time for more. I’ll start with the glass. For this being in the SLx line, the glass clarity is great, even at full 16x magnification. I could make out a wire fence at around 500 yds, see picture. The fast focus eyepiece gets the reticle super clear and the parallax adjustment gets the image spot on at all different ranges. I really am amazed at how clear the glass is for a $300 scope. The only real downfall of looking through the optic is its eye relief. Primary Arms specs the eye relief at 3.6 - 3.9”. So you really have to be in that 0.3” range to get a good eye box picture. Especially at those higher magnifications. I’m not using this on fast moving targets, so it doesn’t bother me much.

  The Primary Arms 4-16x44 FFP has a few different reticle options. Some are their ACSS style, but I’ll be focusing on the ARC-2 reticle of this particular scope. I chose the ARC-2 MOA reticle because it is not cluttered up with stuff, like so many “christmas tree reticles” are. First off, the reticle is in minutes of angle, which is what I prefer. Second, it’s a first focal plane (FFP) reticle. So all the subdivisions, or hash marks, stay the same size throughout the magnification range. The reticle grows as you increase the magnification. This is so those marks in the reticle stay the same, and are usable for windage and elevation holdovers, at any magnification. On that note, Primary Arms did a nice job with this reticle. Almost all of the MOA marks are visible when at 16x. I’ve seen FFP optics that, a big portion of, the reticle disappears when at full magnification. The reticle itself is essentially just a crosshair with little marks spaced every 2 MOA apart. Every 10 MOA, there is a larger mark and a number, at least on the elevation portion of the reticle. Windage is a little different, with 2 MOA marks for the first 10 MOA, and then marks every 5 MOA past that. See the reticle picture for values. This reticle is very clean. It’s kind of old school mil-dot meets new school technology. Did I mention that the grid portion of the reticle is illuminated? Well it is, in red, with 11 brightness settings. I really like the style of simple and useful reticles like the ARC-2.

  The ARC-2 is such a great reticle, but adjusting your scope is still very important. That brings us to the target style turrets on the 4-16x44. If you are into dialing your scope for windage and elevation adjustments, you want good target turrets. I found these to be repeatable, at least in my testing. If I dialed up 15 MOA, and then back down 15 MOA, it shot where I expected it to. I didn’t do a tracking test, But this isn’t a $1000+ scope, so I didn’t see any need for me to do that. The clicks on the turrets feel really good but you can’t really hear them. I prefer feel over hearing them anyway. They also have a little resistance to them, which is nice, so they don’t move if you bump them in the field. Each turret adjusts in 0.25 MOA/click and 15 MOA per 1 revolution of the turret. It has over 85 MOA of total adjustment, or about 6 full turns of the turret. L/R and UP are marked next to or under the turret, depending on which one it is. There is also a little mark to use for setting zero. The SLx 4-16 has the ability to set the turret dials to zero, after you have sighted it in. There’s 3 tiny set screws at the turret's top, loosen them and rotate the knob to zero. Tighten them back up and your zero is now set. 

  I have the Primary Arms SLx 4-16x44 mounted on a “varmint style” AR. The scope weighs in at 25 ounces. But in this case, it is the perfect scope for this particular rifle. The SLx has performed super well for me. It’s super clear for a scope in this price range. It’s easily adjusted, if needed. It has an illuminated reticle for low light use. A parallax adjustment that goes super low, so if I wanted to use it on something like a .22lr, I could. I wouldn’t hesitate to take this hunting in the brush. I think it would make an excellent hunting scope as the ARC-2 reticle doesn’t take up a lot of room in the scope. The magnification range is also great for this AR’s use case.

  If you're in the market for a feature rich FFP optic, the Primary Arms SLx 4-16x44 ARC-2 might be it. I just can’t get over all the options you get in this optic, and at an incredible price. It performed better than my expectations for sure. The updated SLx scopes from Primary Arms are definitely worth checking out.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality low priced FFP optic

Target Market:

Those wanting excellent quality in a mid range optic, but at a reasonable price

FNBs (Features & Benefits of this product):

  • First Focal Plane ARC-2 MOA reticle

  • Partial Red Reticle Illumination, Visible in Sunlight

  • 11 brightness adjustments, including 2 that are Night Vision compatible 

  • Side Parallax adjustment

  • Click Value: 0.25 MOA

  • FOV @ 4x / 100 yd : 26.6 ft

  • FOV @ 16x / 100 yd : 6.5 ft

  • Total Windage and Elevation Adjustment: > 85 MOA

  • Zero resettable turrets  

  • Weight (with Battery, without Lens Covers): 25.4 oz

  • Tube Diameter: 30 mm

  • Eye Relief: 3.6 – 3.9 in

  • Fast Focus Eyepiece

  • Fog Resistant

  • Fully Nitrogen Purged, IP67 Waterproof Standard and Dust Proof

  • 6063 Aluminum with Anodized Matte Black

  • Flip-up Lens Covers Included

  • Uses one CR2032 Battery (Included)

  • Lifetime Warranty

What other aesthetic options or finishes are available?

Tons in the SLx line    

What others are saying?:

Nothing found as of this review

Link to other reviews:

Same - nothing found

Price point:

MSRP = $299.99

Retail = Same, but Primary Arms always has sales going on

I need it now! Availability:

Primary Arms or Amazon

Our Rating:

Pros:

  • Price

  • First Focal Plane reticle

  • Reticle options

  • Good Illumination

  • Clear field of view

Cons:

  • Non-forgiving eye box

Score: 8.50 Great

Favorite Link:  SLx 1x Prism

Primary Arms is an advertiser on the Gun & Gear Review podcast. This does not give them a better review than any other company. 

Primary Arms GLx 1-6x24 FFP ACSS Raptor

  When I opened the box with the Primary Arms GLx 1-6x24, I was super excited. The GLx 1-6x24 is one of Primary Arms’ mid-tier optics. So it falls, price and feature wise, in between their SLx and PLx lines. This particular GLX 1-6x24 has an ACSS-Raptor reticle and is a first focal plane (FFP) optic. This low power variable optic (LPVO) is packed with features.

  Since the reticle is such an important part of your optic, let's start with the ACSS Raptor M6 reticle. The Raptor M6 Advanced Combined Sighting System, or ACSS, is a range estimating and bullet drop compensating reticle. Being that it is a FFP optic, the ranging and estimation properties stay the same throughout the magnification range. This is a big plus as one doesn’t have to recalculate anything at different magnification ranges. The Raptor M6 reticle is calibrated for these cartridges: 5.56 NATO, 5.45x39, .308 Win, 6.5 Grendel and 6.8 SPC. Give or take a few differences in actual ballistics. I mounted it on a 5.56 AR with a 16” barrel and the drop estimations seemed to work well, at least for the ranges I could test. 

1x - targets at 50, 100, & 200 yds. Full reticle illumination

6x - 200 yd targets. Full reticle illumination

  A description of the Raptor M6 reticle is probably in order. The Raptor is a horseshoe style reticle. So there's a larger circle around a chevron aiming point (think triangle). The circle is missing the bottom portion, hence the “horseshoe” name. Then the Raptor has a vertical line, with short horizontal lines on it, to compensate for bullet drops at various ranges. There’s also some dots for wind holds, if needed. On the right and left side of the chevron are MIL ranging lines. These are to quickly assess the range of a 5’ 10” target. The middle chevron aiming point is where precision comes into play. Use the top point of the chevron for accurate aiming. Or just put the chevron over something for quicker shots. The bottom triangle point will be your 200 yard holdover, and then the bottom of the chevron will be your 300 yard holdover. All of this is in Primary Arms’ manuals, I’m just trying to give you a quick summary. Now, if you turn the GLx 1-6 down to its true 1x, the reticle gets pretty small. Don’t fret, this is actually very useful. Now you can use it for super quick shots up close. Very similar to a circle dot reticle in a red dot. Even with both eyes open. Oh, did I mention the chevron is illuminated? It is, but it and the horseshoe are the only parts that are illuminated, the rest of the reticle stays black. 

  Primary Arms also stuck their “Autolive” on/off into the GLx 1-6. The autolive turns the reticle off after 3 minutes of no physical movement, then quickly turns it back on when a tiny bit of movement happens. I love the autolive function and in the case of the GLx, it gives around 600 hrs of battery life. They say it is a daylight bright reticle, but in direct sunlight, the red illumination is pretty non existent. Any time besides direct sun, the reticle’s illumination is easy to see and brightly lit up. It has 10 brightness levels, with and off between each one. I like that there's an “off” between each “on.”

  Now that the long winded reticle explanation is done, we can focus on the glass in the GLx 1-6. Primary Arms uses low-dispersion glass that is multi coated. Why do you care? Because it makes everything look super clear and bright. Yes, the glass is really that clear. The magnification ranges are true to the numbers, so 1x is really no magnification, and 6x is really 6 times normal. I really appreciate the true 1x for running close targets at the range. The 6x makes it pretty easy to hit targets at various ranges also. The field of view is pretty decent, specs are below if you're interested. The eye relief is pretty forgiving at 1x, it’s around 3 to 3.5 inches, but you don’t need to be perfect with it. At 6x that’s a different story, you really need to be in the scopes sweet spot. The clarity of the glass really does rival some of the higher end 1-6’s

  If you are not using the GLx’s Raptor reticle for bullet drop compensation, it has some pretty nice turrets to use instead. The GLx 1-6 comes from the factory with capped turrets. But hold on, there’s something more in the box. Also included is a single exposed turret. Yes, you can replace the elevation turret with a non-capped one. I suppose you could put it on the windage turret also, but why.  Now you can dial in the adjustments as necessary without having to take the cap off. I get that if you are running around in the woods, or doing secret squirrel stuff, you might want the advantage of having capped turrets. But for me, I instantly installed the tactical, non-capped turret. Adjustments are the same either way and adjust in increments of 0.1 MIL’s. These adjustments also use a steel on steel mechanism. This means you’ll have consistent adjustments and repeatability for a lifetime. The GLx 1-6 does have some physically large turrets. This makes it much easier to adjust with gloves, or just in general. The clicks are fairly decent and audible. They feel a tad bit mushy to me, but that’s probably due to the sealing that keeps water and dust out. In all, the turrets adjust well. These turrets can also be loosened up and set to zero. Not a zero stop, but at least you’ll have a zero point to adjust from. 

  There are a few other notable aspects of the Primary Arms GLx 1-6. One is the throw lever. The throw lever makes it easier and quicker to adjust the magnification ring. The ring adjustment operates smoothly, but having the throw lever is really nice. It sticks up about ½” above the ring. So it isn’t really in the way, but is still large enough to matter. Primary Arms also made the lever removable and changeable. It is screwed onto a tiny dovetail. Just unscrew it and slide it off to change it to a larger one, a folding one, or just to leave it off. This next aspect is its weight. It weighs in at 21 ounces. This is a few more ounces than some others in this mid-tier. When I say a few more, it’s like 3 ounces difference, so not much. But on the plus size of the weight, the GLx 1-6 is built like a tank. It is solid. I wouldn’t hesitate to use this LPVO harshly.

  If you are in the market for a top quality LPVO, but don’t want to pay top-tier pricing, the Primary Arms GLx 1-6x24 might be everything you need. The glass is super clear, it has a very useful FFP reticle, is pretty much indestructible, can range objects on the fly, and turns on and off automatically. What more could you want? I’d definitely look into one of these if you intend on running your stuff hard. You can check the GLX 1-6x24 ACSS Raptor M6 out at Primary Arms, as well as all the other products they have over there.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Mid-tier low power variable optic (LPVO) with first focal plane reticle (FFP)

Target Market:

Those wanting a quality mid grade LPVO

FNBs (Features & Benefits of this product):

  • 1-6x Magnification

  • 24mm objective

  • 3.3" - 3.5" of eye relief

  • FOV: 104 ft at 1x, 18 ft at 6x

  • 30mm main tube

  • High strength one-piece 6061-T6 aluminum body

  • 10.25" long

  • Weighs 21.3 Oz

  • Premium grade glass

  • Steel-on-Steel precision adjustments

  • Tactile and audible 1/10 MIL click value

  • Turrets are user configurable between Tactical or Capped

  • Movable and replaceable magnification ring fin

  • Partial reticle illumination - Inner part only

  • First Focal Plane ACSS Raptor M6 Reticle

  • Autolive motion activated illumination

  • 10 total brightness settings, 2 of which are night vision compatible 

What other aesthetic options or finishes are available?

Griffin M6 reticle   

What others are saying?:

5/5 stars at Primary Arms

EXACTLY WHAT I NEEDED

Using this for an old m1a, as a red dot and magnifier don't really work for that platform. The glass is very clear and good eye relief, I zeroed and used out to 400 yards. Impact at 200 and 300 worked well on the bdc reticle, but I had to hold about 450 to hit the 400. I have access to longer range but haven't had chance to try it out yet. I let my friend shoot it and he was very impressed by the glass. Great scope for the price, it is bright on 11 but not like an aimpoint when shooting in the sunlight

Link to other reviews:

Thin Line Defense on YouTube it’s the Griffin reticle, but close enough 

Price point:

MSRP = $599.99

Retail = Same, but Primary Arms runs sales all the time

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Super clear glass

  • Ranging reticle

  • Large capped turrets

  • Optional Elevation turret that replaces capped one

  • Autolive motion activation

  • Removable Throw lever

Cons:

  • Reticle is not daylight bright

  • Heavy-ish

Score:  8.00 Great

Favorite Link:  Walker Defense Research

Primary Arms SLx RS-10 red dot

  When I first learned about the new Primary Arms SLx RS-10 mini reflex sight, I was very interested. Then I received one, and was even more excited. This little, open reflex, pistol mounted red dot is everything they said it would be. Including a great price of $199.99.

Autolive in action

  The SLx RS-10 is packed with features. It runs a 3 MOA red dot that is easily picked up. It has 11 brightness settings. Of which include night vision compatibility and daylight bright. I couldn’t try out the night vision setting, but the daylight bright setting is really bright, even in direct sunlight. You should have zero problems seeing the dot in any light. The RS-10 also has easy to use controls on the left side. These buttons are only raised slightly above the RS-10’s surface. Of course they control brightness as well as actual on/off. I say “actual” because the RS-10 features Primary Arms’ “Autolive”. The Autolive is an automatic on/off function that works fantastic. Just barely move the sight and the dot turns on. After about 3 minutes of zero sight movement, the sight turns off. Any teeny movement will keep the RS-10 on. Back to the “actual” on/off. To turn the sight off, as if you are going to store it for a long time, just hold the up and down buttons simultaneously for a few seconds and the sight will permanently turn off. Then to turn it back on, and into the Autolive feature, just hold either the up or down button a few seconds until the dot turns on. Primary Arms specs the battery life at 40,000 hours with a CR2032 battery. So if you change the battery out once a year, you should be good to go and never have the dreaded dead dot. If you couldn’t tell, I really like the Autolive feature.

  Primary Arms also stuck some other features into the RS-10. For strength, they manufacture the housing out of 7075 aluminum. This is the same grade aluminum that quality AR receivers are made from, so it should be good to go. I really like the shape they chose for the housing and window. The rounded, almost square shape seems to draw my eye to the dot. I seem to find the dot much faster than other pistol mounted red dots. Primary Arms says the window size is 23mm and even if it is a smaller window than some brands, see the above comments. I mentioned battery life earlier, but the RS-10 does have a side loading battery tray. That means you can change the battery without having to remove the sight from your desired mounting platform, keeping your zero intact. Coming in at just over an ounce, the RS-10 shouldn’t weigh you down either.

  Anymore, the mounting method for a reflex sight is very important. Mainly because one needs to know if it will fit on their handgun. The SLx RS-10 uses the fairly common Docter/Noblex footprint to directly mount to stuff. Primary Arms also includes a picatinny rail mount and a Glock MOS plate. That way if you aren’t mounting it directly to a pistol, you have some options. For instance, it would make a great 45 degree offset red dot for a rifle. I ended up mounting it on a Strike Industries Liteslide for a G19, as it has a multi optic mounting platform. The SLX RS-10 mounted in perfectly. Primary Arms decided to go with the Docter mounting footprint so they could use that CR2032 battery and have it side mounted. Since the battery is physically larger than other options, you end up getting more battery life out of it. For the small size of the RS-10, a different mounting footprint just wouldn’t work. 

  The SLx RS-10 is a great little red dot. This doesn’t come without a few tiny gripes. If you hold the RS-10 on target, and start shaking it a tiny bit, in a circle, the dot will galaxy out. So it literally looks kind of like a little galaxy inside the window. Does it bother anything? Nope, when shooting the pistol I didn’t even notice it. Even on moving and circling targets. Most people probably wouldn’t even notice it. I also would have liked to see it on a RMR footprint, but Primary Arms didn’t do this because of those “battery” reasons. I can understand this. Now, on a good note. Even for me, with my astigmatism, the dot is fairly clear. So those with normal eyes will see a nice crisp dot. 

  I am going to say this, the Primary Arms SLx RS-10 is currently my go to red dot pistol sight. This red dot impressed me more than I expected. I can find the dot easily. I haven’t destroyed it yet. Even if I did, it has a lifetime warranty. The size doesn’t get in the way. I’d say it is somewhere between one of the super small mini reflex versions and a Holosun 507. The RS-10 is always ready to go because of the “Autolive” feature. The click adjustments for windage and elevation make it easy to make adjustments, unlike other mini reflex sights that have no clicks. I ran this thing fairly hard and have had zero problems. 

  If you are looking for a mini reflex red dot, the SLx RS-10 from Primary Arms might be it. It is priced under $200. At that price, it’s a great deal for this feature packed red dot. With the Autolive function, you won’t have to worry about if the dot is on or off, because it will always be on. I don’t think you can go wrong selecting the Primary Arms SLx RS-10 mini reflex sight. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality Mini Reflex red dot sight for a great value

Target Market:

Anyone wanting a decent priced pistol mounted red dot

FNBs (Features & Benefits of this product):

  • 7075 aluminum body

  • Side-loading CR2032 battery compartment

  • Convenient push-button controls

  • 11 Brightness settings

  • Daylight bright and night vision compatible brightness levels

  • 3 MOA dot

  • Picatinny Rail Mount and Low Profile Adaptor Plate for Glock® MOS Slides Included

  • Autolive motion activation

  • 40,000 hour battery life

  • Weighs just 1.07 Oz

  • 23mm window

  • Lifetime warranty

  • Docter/Noblex footprint

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out of 5 stars on Amazon 

Another great option from PA

Mounted on my Canik Rival with no issues. Great product for the price. Will highly consider getting another in the future.

Link to other reviews:

Lynx Defense  

Price point:

MSRP = $199.99

Retail = $199.99 but Primary Arms is constantly running sales

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Autolive motion activation

  • Price

  • Dot is easily picked up

  • Side loading battery

  • Actual “click” windage and elevation adjustments 

Cons:

  • Doctor / Noblex footprint

  • Galaxies when circling a target fast

Score:  8.00 Great

Favorite Link:  Walker Defense Research

Athlon Midas HMR HD 2.5-15x50

  A lot of variables can go into selecting a mid-range optic. Price, clarity, features, and so on. Athlon optics has a ton of options available to fit what best suits you. I decided on the Athlon Midas HMR HD 2.5-15x50 AHMR with the  illuminated reticle, for what I needed. The Midas HMR brought everything I was looking for together in one fantastic package.

  One thing you notice, when pulling the scope out of the box, is its quality. It has a feel to it that makes you happy. It is the typical smooth, matte black anodizing we are all accustomed to. It has some weight to it, but it really only weighs 26 ounces. Which is a tiny bit lighter than some of Athlon’s other mid-range optics. It is also 13.8 inches long, so average length for this type of optic. You also end up noticing that the Midas HMR runs capped turrets. Probably so you don’t bump your zero off in the field. 

  For a scope in the $500-550 retail range, the Midas HMR 2.5-15x50 has a ton of features. The magnification range is 2.5x to 15x, as you can figure out from the model. This magnification range is perfect for closer in shooting, but still gives you the ability to see at distances. The 30mm tube and 50mm objective lens give you plenty of light to see what you're aiming at. The low dispersion HD glass and lens coatings also help you see through the scope better. The Midas is a second focal plane reticle, so it stays the same size throughout the magnification range. For hunting, this works out well for me. The reticle is illuminated, but more on the reticle later. Athlon also put a side parallax adjustment knob on the Midas. The great thing about this parallax adjustment is that it adjusts down to 10 yds. Since I mounted the Midas HMR on a PCP air rifle, this was a needed adjustment. Lastly, the Midas has a fast focus eyepiece to get that reticle crystal clear.

  The Midas HMR HD has 2 reticle options available. A BDC option and an AHMR option. I’m not big into BDC reticles, so I chose the AHMR reticle. The AHMR reticle (see inset pic) is an MOA reticle with marks every 2 MOA, both for windage and elevation. No Christmas trees or anything like that, just simple crosshairs with little hash marks. The inner reticle can be illuminated red by turning the side knob to one of 6 brightness settings. The brightness knob also has off positions between the settings, a nice touch so you don’t have to cycle through them all to turn it off or on. The illuminated part of the reticle measures 10 MOA. Everything outside of the 10 MOA is not illuminated. The whole marked reticle has measurements to 30 MOA. Might I mention, all these MOA values are measured at 15x. One would have to calculate them for the lower magnification ranges. I just use an app on my phone that does it for me. I am a huge fan of the AHMR reticle. Athlon made a great reticle for hunting and precision shooting, all in one. It is not too busy to distract you from whatever game you are hunting. Also, the center aiming “plus” and 2 MOA marks provide an excellent choice for precision shooting. 

  As mentioned, I mounted the Midas HMR on a pre-charged pneumatic air rifle. So I didn't do any work past 100 yds with it, of course I did look at targets past 100. The clarity on this scope is amazing. I could easily spot the pellet trace, when looking through the optic, at the same time I was shooting. Especially at 50 and 100yds, there’s a lot of drop on a pellet slug at 100yds. The reticle is super clear also, even at full magnification. The magnification adjustment ring is super smooth. It has some resistance, it's not very stiff, but it stays in place. There’s also a little raised bump on the adjustment ring to help turn it easier, not that it’s needed on the Midas. Under the capped turrets are the ¼ MOA adjustment knobs. The clicks on these are pretty outstanding. No mush to them at all. After you get your zero, you can set the turrets to read zero. Just use a coin to loosen the center, pull the cap off, set it back on at “zero”, then tighten the screw down. I would have liked to have seen a Zero stop on this optic, but that’s not an option. Eye relief on the Midas is stated as 3.9”. It’s pretty forgiving, even at 15x.

  I was pleasantly surprised at how well I like the Midas HMR. I can’t get over how clear the optic is. The reticle is so simple to use and didn’t get in the way for me at all. I think this would be an awesome scope to put on an AR style rifle. In fact, I have thought about moving this one over to a varmint rifle style AR. The click adjustments make it easy to adjust for bullet drops, if needed. Those 2 MOA marks work so well for hold-overs that I really didn’t need to use the turrets. When I adjusted the turrets, the scope always returned to zero without any deviation. The Midas performed better than I expected.

  So if you are looking for a second focal plane mid-range optic, the Athlon Midas HMR 2.5-15x50 might be the ticket. It is even its own product line in the Athlon catalog. The Midas did everything I was hoping for and more. It is super clear, is priced right, and has a fantastic reticle. Athlon Optics has a ton of different optics options, so go take a look and be sure to check out the Midas HMR when you’re there.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Extremely clear second focal plane optic with illuminated reticle

Target Market:

Hunters, competition shooters, or anyone just wanting a good mid-range distance optic

FNBs (Features & Benefits of this product):

  • Fully coated, low dispersion HD glass

  • XPL protective coating

  • 2.5-15 magnification

  • 30mm tube

  • 50mm objective lens

  • 3.9” eye relief

  • Field of View: 41.8 ft - 6.8 ft

  • Side parallax adjustment to 10yds

  • 0.25 MOA click adjustment value

  • Capped turrets - adjustable for zero

  • Length - 13.8”

  • Weight - 26 ounces

  • Second focal plane Illuminated AHMR reticle

What other aesthetic options or finishes are available?

600A reticle 

What others are saying?:

5/5 stars at Athlon Optics

I have used a wide variety of optics on various rifles, from high-end tier 1 optics to cheap rimfire scopes. I wanted a SFP optic for a long-ish range hunting rifle. This scope is, IMO, perfect for this application.

The eyebox is very forgiving at max mag, the glass resolves very well and shows good contrast, and the color rendering is neutral. There's a bit of barrel distortion at the low end of the mag range, but it's reasonable for the zoom range and it's pretty much unnoticeable after 8x or so. All the controls move easily and smoothly. This scope really shines in low light at lower mag where the 50mm objective gives you a very large exit pupil that really maximizes the available light. The AHMR reticle is, IMO, the perfect width for this application being thin enough not to obscure the aiming point and bold enough to see against all but the darkest of backgrounds (and then there's the illumination for those conditions). Parallax is marked down to 10 yards and I've tested it down to 8 yards at max mag. As the magnification is lowered the depth of field really expands making it possible to leave parallax set, let's say for 100 yards, and the image stays in focus for objects up close (25 yards) and far away (250 yards). Optically this scope is really well balanced for hunting.

Unlike many scopes with capped turrets, the turrets on the Midas HMR are tactile and solid with no play between detents - they feel like the turrets of a tactical scope that have been scaled down to fit under the caps. It doesn't have a zero stop, but the turrets are resettable. This makes it actually useful as a long-range hunting scope where you might need to dial for a ballistic solution. The parallax knob is very smooth and moves easily making it easy to dial out parallax and focus on the target. I can say that this scope has the best mechanical feel of any hunting scope I've used.

This is really an impressive package for the price, and IMO it may be the best value in a SFP hunting optic out there. And of course, it's backed by Athlon's outstanding reputation for customer service. I have zero regrets about buying this scope and recommend it 100% for a mid- to long-range hunting optic.

Link to other reviews:

The Firearm Blog 

Price point:

MSRP = $649.99

Retail = $519.99 at Brownells

I need it now! Availability:

Athlon Optics or Brownells

Our Rating:

Pros:

  • Super Clear

  • Tactile click adjustments

  • Parallax adjustment

  • AHMR reticle

  • Illuminated reticle

Cons:

  • No zero stop

  • No Auto on or off for the illumination 

Score: 9.00 Amazing

Athlon Midas TSP1 Prism

  I’m starting to convert some rifles over to 1x prism sights from red dots. This is because they offer a reticle without the need for a battery. Thus, the Athlon Midas TSP1 prism sight was right up my alley. Prism sights usually have an illuminated reticle option. As does the Athlon TSP1. The Athlon Optics Midas TSP1 prism sight has been out for some time now, I just finally have one I’ve been using, for about 3 months, with good results.

  Let’s start by why I am converting over to prisms. The main reason for this is that, if for some reason the battery happens to die, prism sights have an etched in reticle. Similar to your typical scope. Some prism sights, as with the TSP1, have a non-magnified option, or 1x. This makes them an ideal replacement for your everyday red dot optic. Prism sights are also usually pretty compact.

  The Midas TSP1 comes feature packed. Like any good scope these days, it has all the fancy lens coatings, is nitrogen purged, fog proof, shock proof, and waterproof. The TSP1 has a 21mm objective lens that gives good light transmission. It even comes with both hi and low mounts. Zeroing adjustments are made in 1 MOA click increments by using the top side of the turret caps. Just unscrew the cap, flip it over, and the flathead built into the cap fits perfectly into the adjustment screw slot. Lastly, it uses a single AAA battery for the reticle illumination.

  Most prism sights aren’t as small as a comparable red dot. However, the Midas TSP1 is not much larger than your current, tube style, red dots. For one, the TSP1 is only 2.7” long. Height is always determined by what mounting base you have on it. But with the high base, it measures 2.5” to the top of the battery compartment, from the mounting rail. I measured the width to be about 1.9”, this is from the battery compartment to the outside of the adjustment buttons. As you can see, it’s not very big at all. It also isn’t very heavy, weighing in at 6.25 oz’s. 

  Now for the most important part, the reticle. The Midas TSP1’s reticle is top notch. It is mainly calibrated for 223/5.56, but should work reasonably well with other calibers. For reference, I mounted it on a 5.56 AR15. The reticle design works really well. It is a horseshoe style with a few usable differences. The outer ring is 66 MOA, or the equivalent of an average size human at 100 yds. In the middle of the ring is a 3 MOA dot. Sight the 3 MOA dot in at 50/200 yds for the rest of the holdovers to work properly. Below the 3 MOA dot, is a 2 MOA dot. This is your 300 yd aiming point. Having a smaller dot below the main dot may seem odd, but it isn’t. The smaller dot actually makes it easier to see your 300 yd target because it doesn't obscure it as much. Below that dot, is a vertical line with a couple of hash mark lines. The top of the line is your 500 yd aiming point. It is also your human height range estimation for 300 yds. The wings on the edges of the reticle really just let you know how level the gun is, or where the center point is for range estimation. The actual MOA numbers for all the dots and lines are in the Midas TSP1 manual, or online, if you are curious. The TSP1 also has a fast focus eyepiece to get that reticle crystal clear.

  The Athlon TSP1’s reticle is also illuminated. But not just your normal red illumination, the TSP1 also has green illumination. Most other prism sights only give you the option of one color. One can switch between the two colors by pressing both the up and down brightness buttons at the same time. I really like the options of green or red. I usually leave the TSP1 on green, as the reticle is clearer for me in that color. Not to be misunderstood, the red illumination is also clear, but I prefer the green in this case. To initially turn the illumination on, just push the brightness up button. To turn it off, hold the brightness up button for 3 seconds. Once it’s on, just use the +/- buttons to increase or decrease the reticle brightness. There are 10 brightness settings to choose from. Both colors are daylight bright and neither washed out for me in direct, bright, sunlight. The Athlon TSP1 also has a 6 hour auto off function. So if you haven’t pressed any buttons in that time frame, it will turn off. The TSP1 does not have an auto on function. Remember, it has an etched reticle, so you will still have an aiming point. Of course, once you turn the TSP1 back on, the brightness is where it was last left. The soft touch brightness buttons are large enough that I don’t have trouble using them, something I can’t say about some of the other optics I have used. 

  I am really enjoying the Athlon Midas TSP1. It is super clear. The etched, illuminated reticle also doesn’t affect my astigmatism like red dots do, so no “starburst”. Which is another reason I am switching over to prism optics. The somewhat limited eye relief didn’t seem to be a problem. When I say somewhat, the reticle is still visible at 12” of eye relief, it is just harder to locate because the window size gets smaller. The TSP1 also performed very well for me when I used it in a big local shooting match. Athlon doesn’t state battery life, but the initial AAA battery is still going strong. After all, the AAA batteries are super easy to find, even at a tiny store in the middle of nowhere.

  Athlon Optics did a pretty good job with the Midas TSP1. The MSRP may seem a little high, but street price is right on par for a 1x prism sight. Plus you get multi-colored reticles and it uses that AAA battery. If you are like me and want a good 1x prism sight, check out the Athlon Midas TSP1. It’s a good all around prism to replace that fully battery powered red dot.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

1 power prism scope with green or red illuminated reticle

Target Market:

Those wanting a non magnified optic with the benefits of having an etched reticle

FNBs (Features & Benefits of this product):

  • Obj. Lens - 21mm

  • FoV ft @100Y - 66ft

  • Red or Green illuminated etched reticle

  • 1-10 illumination settings

  • Center Height - 0.88” Low mount / 1.50” High mount

  • 1 MOA windage/Elevation adjustment

  • AAA battery

  • Weight - 6.25 ounces - 7.8 ounces with high mount

  • Length - 2.7”

  • 6hr auto off

  • Multi-coated lenses

  • Has Aimpoint T1 mounting footprint

What other aesthetic options or finishes are available?

3 and 4 power 

What others are saying?:

5/5 stars at Athlon Optics  

Really nice optic. It needs more information,

A representative told me the mount is proprietary. It however does in fact work on Industry standard T1 Micro Style mounts. Fits good in an ADM Mount, RS Regulate for AKs, or even a low mount for Shotguns or PCCs like the Scorpion/Stribog.

Athlon if you were open about this tidbit, you'd sell a lot more! It's a prism scope with a similar size to other micro red dots and it takes T1 mounts. Almost perfect for what it is.

Link to other reviews:

Nothing worthwhile found

Price point:

MSRP = $337.49

Retail = $269.99 at Brownells

I need it now! Availability:

Athlon Optics or Brownells 

Our Rating:

Pros:

  • Etched ranging reticle

  • AAA battery

  • Green or Red Illumination

  • T1 compatible mount

Cons:

  • Eye Relief

  • No auto on

Score: 7.50 Good

Favorite Link:  JSD Supply

Atibal SLR-1

  I first learned about the Atibal SLR-1 red dot at Triggrcon. To say the least, I was impressed with the prototype I handled. After some time, the production versions were released and they sent one for review. The SLR-1 is 1x20 red dot sight.

  There are a lot of red dots on the market, but only a few are even similar to the Atibal. The Atibal SLR-1 is solar and/or battery powered. The solar works so well that I even ran the red dot without a battery, in overcast weather. Because the SLR-1 is so efficient, it has a combined battery life of over 100,000 hours, that’s over 11 years! Another innovative feature is the removable solar panel, should you break it or something, just order a new one. Much better than ordering a whole new sight. When in the “solar” mode, brightness adjustment is done automatically depending on ambient light. One can switch over to “manual” mode if they want to set the brightness level.

  As with most red dots, the Atibal SLR-1 has a bunch of expected features. The SLR-1 has a 2 moa dot or a 35 moa circle dot reticle. 8 brightness settings, 1 of them is night vision compatible. It’s shockproof, water proof, parallax free, nitrogen filled, and has multi-coated lenses. The battery is easily accessed on the side of the sight, as are the multi-use buttons. Length on the SLR-1 is 3”. Weight is 5.6 ounces. It comes supplied with a very nice AR co-witness mount, but has mount compatibility with Aimpoint T-1 and H-1 mounts

  Now that all the technical stuff is out of the way, let’s dig into some of the good stuff. My SLR-1 came in a nice plastic padded case with everything needed to mount it, zero it, clean it, and cover it, they even threw in an extra battery. I can’t say enough good things about the supplied mount. Most supplied mounts are usable, but not great. The Atibal mount is sturdy, good looking, and mounts very securely. A wrench is even supplied to tighten down the mount.

  Actual use of the SLR-1 is where it shines. The dot and circle dot are very clear. Looking through the 20mm tube, I see little to no color differences. Because the solar panel is mounted on top, it picks up light well. When using the “solar” mode, the brightness of the dot is automatically adjusted. One drawback to the “solar” mode is that you can only use the 2 moa dot reticle, not the 35 moa circle dot. The auto brightness function adjusted brightness extremely well, never did I feel like the dot was too bright or too dim. It is also very responsive to changes in ambient light. To switch over to the “battery” mode, just tap the “+” button and you are now using the battery. Here you have manual brightness adjustments. As you can guess, “+” increases the brightness, and “-” reduces the brightness. The dot does flare when turned up, but that’s pretty normal for any red dot. Since we are on “battery” mode, if you hold down the “-” button for about 3 seconds, the reticle will change over to the 35 moa circle dot. After using the circle dot, I think I prefer a 65 moa dot over the 35 moa dot. Mainly because the bottom of a 65 moa circle is the height over bore zero of an AR at 7 yds. Now if you want to switch back to “solar” mode, just hold down the “+” button for about 3 seconds.

  I’ve been using the SLR-1 for around 4 months. I really like the 2 moa dot and hardly ever use the circle dot. Like mentioned before, it is super clear and easy to find the dot. It has held zero, even with me bouncing it off a wooden bench. It’s light, so it fits in well with the carbine it is on. One design aspect I like is the protected turrets. Yes, it makes it harder to get the caps on and off for adjustment, but protects them from being broken off. Speaking of caps, the turret caps also can be turned over and used to adjust the windage and elevation, both of which are 1 moa adjustments. The actual clicks on the adjustments are pretty good also. There is no problem hearing or feeling them. 

  Atibal did a stand up job designing the SLR-1. It’s clear, tough, and has some of the best battery life in the game. The use of industry standard mounts is smart, as is the multiple reticle option. Plus it has a lifetime warranty. Atibal has been upping their game in the optics industry, definitely give them a look.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Solar Red dot sight

Target Market:

Those wanting a red dot with solar capability

FNBs (Features & Benefits of this product):

  • Solar and battery powered with run times in excess of 100,000 hours

  • Removable solar panel

  • Parallax Free

  • Easy accessible battery (no tools needed)

  • Shockproof

  • Multiple Dot System (MDS)

  • 1 Hour Auto Shut Off when in battery mode

  • Multi-coated lens

  • 2 MOA dot, 35 MOA circle dot

  • 1 MOA click adjustments

  • Brightness - 8 Settings (1 night vision, 7 daylight)

  • Detachable Co-witness mount

  • Lifetime Warranty

  • Nitrogen Filled

  • Water Proof

  • Battery - CR2032

  • Length 3"

  • Weight 5.6 oz

What other aesthetic options or finishes are available?

None

What others are saying?:

Rich F. on Atibal 5/5 stars

Sweet dot!

Competitive 3-gunner, USPSA shooter, steel challenge ringer, and firearms enthusiast. I’ve owned the SLR-1 for almost a half year now. I have almost a thousand rounds with it on my competition shotgun. It's had up to 1,400pfs shells through it throwing 1 3/8 ounce of shot and don’t forget about slugs and buck shot. I can’t wait to run this thing next season in competition. Awesome dot, slim, good looking, love the solar feature and dual reticle. The circle dot setup maybe perfect on the shotgun! I'm proud to own four Atibal optics, and I’d recommend them to anyone. The price and no BS warranty seals the deal on these guys! Great job Atibal, I'm excited to see what other optics you guys come out with. I’d recommend this brand and product to anyone.

Link to other reviews:

Nothing found

Price point:

MSRP = $379.99

Retail = $323.00 at Rainier Arms

I need it now! Availability:

Atibal or Rainier Arms

Our Rating:

Pros:

  • Clear, Crisp Dot

  • Solar

  • Replaceable solar panel

  • Circle dot

  • Industry standard footprint

  • Protected turrets

Cons:

  • 35 MOA circle dot

  • Dot only when using solar

Score: 8.50 Great

85.jpg

Favorite Link:   Gun and Gear Cult

Holosun hs503c micro red dot/circle dot

  Holosun has been around for a while now. Some of their products are innovative in the red dot market. Lets take the HS503C for example. It starts as a red dot, adds in a circle dot option, and then adds in solar power to increase battery life. I contacted Holosun to get one in for review, and they graciously complied. 

  I was intrigued by the 503C's solar power. I will do my best to explain it. The solar panel sits on top of the optic and does not charge the battery. Don't be disappointed though, it runs the circle dot very well. In fact it will actually run the circle dot in daylight, without the battery! When talking with Holosun, they mentioned that the 403C even works better with solar power, and probably would run without a battery in pretty low light, but it is a red dot only. However, when running the 503C on the solar setting, only the circle dot works. The option of having a red dot or circle dot reticle only works on battery power, which was kind of disappointing. When using the battery power, one can switch between the dot or circle dot by holding down the "-" button. To switch between solar and battery, and vis-versa, hold down the "+" button. 

  The HS503C comes with everything you need. When you first open the box, you notice that the red dot is already attached to a riser mount. This gives you a lower 1/3 co-witness with an AR rifle's iron sights. You can remove the riser and put on the supplied low mount if you are mounting it to something that doesn't need the extra height. Also in the box are tools to mount and adjust the sight, a screwdriver to remove and install the battery, a cleaning cloth, and a set of rubber caps. I mounted this one on an AR. One of the big downfalls of this sight are the teeny screws that hold the battery in, make sure you use the proper phillips head screwdriver so as to not strip them out. The HS503C has an industry standard T1 mounting size, so any aftermarket Aimpoint T1 mounts should work, but I would try it beforehand, just in case.

Circle Dot Reticle

Battery Tray partially open

  Now on to some specs. The HS503C has a 2moa dot or a 65moa circle with a central 2moa dot. The adjustments are 1/2 moa with the caps serving as the adjustment screwdriver. Also inside the cap are the markings for up/down and left/right. On the right side is the battery tray, it is held in by 2 screws. Also on the right side is the brightness and on/off buttons. To turn the sight on, push the "+" button, to turn it off, hold down both buttons. In the battery only mode, you can adjust brightness by pushing the "+" or "-" buttons. In solar mode the dot will auto adjust for brightness. There are 9 daylight brightness settings and 2 night vision ones. Holosun states 50,000 hours of runtime with the dot at the 6 setting and 20,000 with the circle dot, so on par with other brands. 

  I have been using the HS503C for some time now. The sight is very clear. The 2moa dot allows for precise engagements. Having the 65moa circle dot is a nice option, and it really shines when shooting up close. But my favorite part is probably the self adjusting solar setting. Even in direct bright sun light, the circle dot was easily visible on the solar setting, the same in low light. I haven't treated the Holosun very nice either, it has been thrown in the back of a pickup a few times, dropped on the ground, and it has held zero. 

  People sometimes ask if I would recommend certain products. The Holosun is on that list. It has done everything I could ask it to do. If your looking for a good mid priced red dot, check them out. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Solar and battery powered Micro red dot or circle dot

Target Market:

Anyone wanting a quality combination red dot or circle dot reticle 

FNBs (Features & Benefits of this product):

  • 2 MOA dot or 65 MOA Circle Dot

  • 20,000 hr battery life with Circle Dot

  • 50,000 hr battery life with 2 MOA dot

  • 9 Daylight and 2 Night Vision brightness settings

  • Waterproof to 1 meter

  • Weighs 4.4 ounces with tall mount

  • 2.6" Tall x 2.5" Long x 1.4 "Wide with tall mount

  • 0.5 MOA adjustments

  • Uses 1 CR2032 battery

  • Operating Temp: 14F to 122F

What other aesthetic options or finishes are available?

Red dot only (HS403C) 

Protected adjustment knobs (HS503CU)

What others are saying?:

4/5 stars on Amazon

PRICE is awesome for what you get

Let's start with the positives, PRICE is awesome for what you get!!! The glass is really clear and the dot / circle dot are just about perfect. Easy to sight in and it works just as advertised. Best buy for the money hands down. Now there are a couple of fustrating things about it. The battery tray screws trust me these things are tiny and a Philips head to boot put down a white towel when the come loose and hit the ground they disappear. Ask me how I know. A torx bit or hex head would make installation much better. The dot adjustment buttons are smallish and are much easier to use using your trigger hand if you are right handed. This doesn't sound too bad until you try it. I also feel that I'd you like to shoot wearing gloves the size of the pads are just too small. Now that being said I still am extremely happy with this purchase and would and will buy it again.

5/5 Stars on OpticsPlanet

Great little optic

HS503C... Buy it you wont regret it! After looking around and doing research for an optic for my new lightweight AR build I decided to go with the holosun and man I'm glad I did. The HS503C has a Crisp circle reticle and dot amazingly cleaner than the EO tech. I love the option of being able to switch between the 65 MOA circle with a 2 MOA dot and the single red dot. It's easy to zero and function, the solar option is a great feature but the battery life is even better. Bang for buck you can't beat it!

Link to other reviews:

The Truth About Guns

Price point:

MSRP = $282.34 @ Holosun

Retail = $239.99 @ Brownells

             $239.00 @ Amazon

I need it now! Availability:

Holosun, Brownells, or Amazon

Our Rating:

Pros:

  • 65 MOA circle dot

  • 2 MOA dot

  • Lightweight

  • Everything needed comes in the box

  • Good Daylight visibility, even when on Solar power

  • Solar and Battery powered

  • Turret caps double as adjusters for windage and elevation

Cons:

  • Battery Tray screws

  • Operating Temperature seems low

  • 65 MOA circle dot only in solar mode

 

Score:  7.5 Good

 

Chads Favorite Link of the Day: AR-15 Podcast

 

 

Volquartsen Custom Scorpion .22 LR Pistol Review

Review-Picture-4.jpg
Review-Picture-4.jpg

Review Picture 4

Written by: Ryan Michaud

The .22 rimfire pistol market is one of variety. From inexpensive plinkers to tricked out, high performance raceguns, I don’t know of a market that offers the discerning consumer more choices in terms of fit, finish & quality. In contrast to a few years ago, .22 rimfire ammunition has started to make a comeback in areas where it was scarce for quite some time, and that has made taking these rimfire pistols back out to the range much more of a possibility. Gone are the days of 99 cent Winchester White boxes of 50 rounds like I remember, but .22 LR still offers good performance and practice options at a far reduced price compared to full size centerfire ammunition. As mentioned before, there are many different tiers of .22 LR pistols. The Volquartsen Custom Scorpion is definitely securely placed in the top-tier of .22 LR handguns; it is a lightweight .22 LR Pistol designed for high performance and is equally at home in the competition arena, or out in the field.

The Volquartsen Custom Scorpion can mount many optics such as this Burris Fastfire

Back in March I did an interview with Scott Volquartsen of Volquartsen Custom about their business. I came away impressed with their commitment to quality as well as to their employees & customers. Scott stated that Volquartsen had worked to make the finest rimfire handguns and rifles for competition and other uses that money could buy. We spoke about potentially having me test a handgun, and after NRA Show 2015, we spoke about what my desires would be if I was contacting Volquartsen to purchase a custom .22 LR handgun. I told Scott that if I were to call and order one, I would want a handgun that could fill a couple roles: competition & handgun hunting. I am a fan of hunting with handguns, and many .22 pistols simply aren’t precise enough for small game hunting. I have also thought about getting involved in rimfire competition, and would want a handgun that could fill dual roles. Scott suggested their Scorpion line, with a 4.5” barrel, the 1911 style VC Target frame, and Fiber optic front sight with the Volquartsen Target rear sight. The handgun would be fitted with all Volquartsen internals and would have an accessory rail on the top if I desired to mount any optics.

The Competition Bolt is coated in a variety of finishes for superior performance.

The Scorpion is a combination of the Lightweight VC Target Frame and the LLV Upper. It comes standard with the Volquartsen Competition Bolt. The Volquartsen Competition Bolt is CNC Machined and ground for superior tolerances, fit and finish. It features the SureStrike Firing Pin and the Exact Edge Extractor to ensure reliable feeding & function. The bolt is also offered with four different coatings, Diamond Like Carbon, Chromium Nitride, Titanium Nitride and Titanium Carbo-Nitride. The example I have here has the Diamond Like Carbon Coating. I can attest to the reliable functioning of the bolt and pistol, as I put a little over 3,000 rounds of various brands of .22 rimfire cartridges through the pistol in about a months time with not a single malfunction. This was with extremely minimal lubrication and almost no cleaning aside from wiping the bolt with a soft cloth.

The VC Target Frame and LLV Upper combine to make the Volquartsen Scorpion

The VC Target Frame is manufactured by Volquartsen, and is offered with a MKIII style grip angle or a 1911 style grip angle. The example I have is the 1911 style frame. It is CNC-machined from aluminum alloy and with a 6oz base weight, is very light and handy. You can get the frame in a variety of finishes & colors, with the Black, red, blue and OD green frames being Type III hard anodized and the Silver frames being NiB coated. The VC frame is fitted with all Volquartsen internals, including the Accurizing Kit with Extended bolt release, CNC Machined Target Trigger, Wire EDM Cut Target Hammer and target sear. It also sports a CNC machined disconnector, extended safety and in the MKIII models, a spring-loaded magazine ejector for positive ejection of spent magazines. Volquartsen has eliminated the magazine disconnect from this frame as well. Their trigger is outstanding, with minimal take-up and an adjustable overtravel stop. The manual lists the trigger pull weight at 2.25 lbs and I found this to be true, with the average over 10 trigger pulls reading between 2.25 and 2.3 on my Lyman trigger pull gauge. I cannot say enough good things about the trigger on this pistol.

The Volquartsen Target Rear with Fiber Optic Front presents a fantastic sight picture

The LLV Barreled receiver/upper is hard anodized & CNC machined. The receiver and barrel shroud are precision machined as one piece from aluminum alloy. An integral picatinny rail is machined into the top of the receiver for easy mounting of any of the optical sights available on the market today. It is fitted with a precision stainless steel barrel that is machine-honed and lapped and is available in either 4.5” or 6” lengths. The standard configuration LLV comes with 1/2 x 28 muzzle threads with either a thread protector, or with their LLV compensator.

The LLV Compensator mates perfectly with the LLV upper and tames the mild .22 LR recoil to almost nothing.

  My example has the LLV Compensator which functions very well and tames the already mild recoil of the .22 Rimfire down to almost nothing. The pistol runs well with a suppressor too, as you can see in the video. You can also choose any number of sight options, such as Hi-Viz front and Tritium rear, Hi Viz Front and Target rear, or Volquartsen Target sights. You can also opt to not have sights installed and simply use electronic optics.

Grip options for the VC Target Frame include Volthane Target Grips or Laminated Wood Target grips for the MKIII style grip angle, and Aluminum Grips or the Hogue Monogrip for the 1911 Style Grip angle. My example sports the Hogue Monogrips. They were very comfortable and made the gun easy to handle, especially after many hundreds of rounds downrange in a single session. This whole package comes in at under 2 lbs.

Multiple brands & types of ammo were used in the evalutation

At the range, I found the Scorpion to be incredibly accurate and fast. From close-up shooting on multiple steel targets as fast as possible, to 45, 55 and even 60 yard shots on an 8” steel plate, the Volquartsen Scorpion delivered. I fired many different brands & loads through the Scorpion over the test period, and the pistol functioned flawlessly with every single one. I used CCI Mini-Mag .22 LR hollowpoint 36 grain, Winchester Super X .22 LR round nose 40 grain & Aguila .22 Pistol Match 40 grain LRN. Also mixed in there were some Winchester 40 grain Dynapoints during the suppressed fire. At about 25 yards, the CCI Mini Mags were the most accurate for me, with groups of 0.58” being common.

It seems my particular sample really likes the lighter weight 36 grain bullet of the Mini-Mag. The rest of the ammunition didn’t shoot as tight groups for me, but all were well under an inch from a rest at between 25-30 yards. I had the most fun doing rapid fire steel drills on multiple 8” steel plates from 15 yards. It is REALLY fun to run this pistol fast.

Groups like this one (minus those two flyers from a previous group; the sticky fell off) were commonplace with the Volquartsen Scorpion at 25 yards

The Volquartsen Custom Scorpion is really an outstanding .22 pistol. The combination of high quality features really make for a handgun that is a cut above the rest in the rimfire pistol world. When I spoke with the folks at Volquartsen, I said that I would want a pistol that would be equally at home out in the field hunting small game as it would be in the competition arena. This pistol really delivers. It is eminently customizable to fit your needs, and  you can tell the people at Volquartsen really care about the desires of the customer. Every question/request I had was answered in a timely manner and with a high degree of detail and explanation. With a price range between $1,175 and $1,236 depending upon chosen options, it is definitely in the higher range of .22 pistols, but you are getting a high quality, high performance handgun that will definitely last you a lifetime.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: Super High Quality .22 LR Pistol intended for competition or target shooting use.

Target Market: Shooters who need a .22 LR pistol for competition or small game hunting.

FNBs (Features & Benefits of this product):

  • High quality internals

  • Light weight

  • Superb Trigger & Sights

  • Optics Mounting Options

  • Fantastic Customer Service

  • Support a family-run firearms business

What other aesthetic options or finishes are available?

  • Black, Red, Blue & OD Green Type III Hard Anodized

  • Silver is Nickel Boron (NiB)

  • Target Grips

  • Aluminum Grips

  • Various Options for Compensators

  • 1911 style or MK III Style Grip Frame

Price point:

MSRP = Between $1,175 and $1,236 depending upon chosen options. This is a custom pistol.

I need it now! Availability: You can purchase the Volquartsen Custom Scorpion directly from Volquartsen Custom.

Pros:

  • Custom built to the user specifications

  • Uses high quality components for the internals

  • Trigger is AMAZING.

  • Coated Competition Bolt almost eliminates the need for lubrication.

  • Reliability over 3,000 rounds with almost no cleaning whatsoever is amazing in a .22 rimfire pistol.

  • Accuracy is top-notch even at long distance.

  • Worked fantastic with a .22 LR suppressor. Very very quiet and accurate. Also, the sights can be used with the suppressor attached.

Cons:

  • It is definitely in the upper end price range for .22 LR pistols. However, this isn’t really a “con” as it IS a high quality custom .22 LR pistol intended for the highest levels of rimfire competition.

95

Our Rating: 9.5 AMAZING!

Visit Volquartsen Custom for more information and to place an order!

Visit Ryan Michad over at Handgun Radio and the Handgun Radio Facebook Page

Warne R.A.M.P. Scope Mount Review

warne1 The Warne R.A.M.P mount is a 1 piece scope mount for AR-15 style rifles, or any rifle that has a picatinny rail and needs a forward mounted optic.  R.A.M.P stands for Rapid Acquisition Multi-Sight Platform. It gets the multi-sight part because besides having built in rings, it also has 2 45degree angled mounts.  These mounts allow you to install a small red dot sight on one of the canted rails.  One could mount Iron sights on these also, but would then need the optional mount for the front sight to attach on.  The RAMP mount comes in three sizes for most needs: 1inch, 30mm, and 34mm.  I have the 1" version, but they are all essentially the same.

The 45 degree mounts are really what sets this mount ahead of its competition.  With the ability to mount something small on either the left or right side of the scope, it will appeal to both left and right hand shooters.  If you decide not to use one side or the other, or neither, the angled mounts are removable with 2 socket head screws on each.  Because of the added mounts, and space to attach the mounts, it is not the lightest mount out on the market.

Another nice feature on the RAMP mount is the 1/2" hex screws on the mounting base.  They are to be torqued to no more than 65in/lbs.  Also a torx style allen wrench is supplied to tighten down the top of the scope rings. There are 2 T-15 torx screws per side and should be tightened in an x pattern.

I really like the RAMP mount.  It puts the scope at the correct height and the proper eye relief.  With the option of adding a small red dot if one desires. The only negative I can see with the mount is the weight, but it is a very sturdy mount.  If you are in the market for this style mount, you cant go wrong with the Warne RAMP.

warne2

Firearms Insider Reviews - 8 Key Points

Claim to Fame: 1 piece scope mount with angled side mounts for AR-15 style rifles

Target Market: 3-gun

FNBs (Features & Benefits of this product):

  • 1 piece scope mount
  • Proper eye relief distance on AR pattern rifles
  • Solid aluminum construction
  • 45 degree mounts for red-dot sights
  • Available for just about any scope diameter
  • Lots of color options from boring to flashy

What other aesthetic options or finishes are available? Black, Zombie green, Red, OD green, Dark Earth, and Blue

What others are saying?:

Alex on Amazon 5/5 stars. Best AR mount anywhere.

Bought one of these for my RRA LAR 15 to use with a Leupold Mark AR on top and a Leupold Deltapoint on the side. Got it, opened it, and could not have been more impressed with the build of this mount! Rock solid craftsmanship. Placed it on my AR and it holds tight and sits perfectly. Take it off...no problem. Put it back on....exact return to scope zero. Just bought another one for my RRA LAR-8! Get one, or two, you will not ever want any other mount!

Jkrispies on Brownells 5/5 stars. Great mount for a 45 secondary mount.

A little heavy (even with the side mounts removed) if you're not going to use the 45 degree option, otherwise typical Warne quality, which is the best I've found out there. Only warning I'd give is to do some research before buying this-- will your Mini-Red Dod Sight clear the bell of your primary scope? Ironically, I think the perfect use of this scope with a 45 degree mount would be on a monolithic receiver (think SCAR) and the mount backwards. Height is perfect. If you don't foresee yourself ever using the side mounts, I would recommend going with the Warne SKEL mount, which is the same mount as this minus the extra attachments, thus reducing weight significantly.

Price point:

MSRP = $195.49

Retail = $121.20 on Amazon  $169.99 on Brownells

I need it now! Availability: Amazon and Brownells

Our Rating:

Pros:

  • Proper eye relief
  • Removable 45 degree angled mounts
  • 1 piece optics mount
  • Multitude of color options
  • Available for 1", 30mm, & 34mm scopes
  • Made in U.S.A.
  • Rugged
  • Returns to zero

Cons:

  • Heavy
  • No quick detach

Score: 8.50 Great85

 

 

Chad's Favorite Link: Albany Rifle and Pistol Club

Bushnell AR 3-12x40 Scope

bushnellarI purchased the Bushnell AR scope because I needed an optic for local 3-gun matches and varmint hunting. The scope had everything I was looking for at a very inexpensive price. I opted to purchase a Bushnell because I have not had any problems with any products that I have used from them. This includes some of their low end scopes and some higher end ones. bushnellbdc

The scope was mounted on my AR in a Warne RAMP mount and it fit perfectly. Once sighted in,  I tried out the BDC reticle with some 55gr ammo. I was only able to try the drop compensators at 200 and 300yds, but they seemed to be accurate enough. The BDC is calibrated for your standard 55gr ammunition, but should also work adequately with 62gr ammo. The BDC reticle is to be zeroed at 100yds and then has dots for 200, 300, 400, & 500 yard drops. The 600 drop mark is where the line gets wider (think duplex reticle). I would have liked it better if Bushnell had put a dot at 600. I use heavier bullets and just plugged them into a ballistic program so that I know what the drops actually are in comparison.

This scope has some nice features. For one, it has resettable target turrets. Once sighted in, you can take the supplied allen wrench, loosen up the screw on the top of the turret, pull the knob up and turn to zero, and push it back down, then tighten up the allen screw. The AR series scopes also have a side parallax adjustment,  which is very nice when adjustment is needed while looking through the scope. I found the scope to be very clear for the price, especially at the lower settings. After adjusting past about 11x it gets a tiny bit blurry around the edges. The eye relief must be more precise at the higher magnification also. The reticle is calibrated at the highest (12x) magnification also, but I didn't have any problems seeing any targets at this magnification.

Now for the things I didn't like about this scope. It is heavy, weighing in at more than 21 ounces. It is definitely noticeable when mounted. The target turret clicks are a little bit mushy. But I really didn't expect any more at this price point. The scope is also long at 12". Not unmanageable, but it could be shorter. The other notable dislike is the small blurriness around the edge at higher magnifications.

Bushnell

Even with the flaws mentioned above, I do like this scope. It has the right features at an excellent price. It can be used with both eyes open down at 3x and can magnify smaller targets at the 12x setting. If you're not concerned about weight, this could be a good scope for your next AR.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Inexpensive Tactical scope for AR style rifles in .223(5.56)

Target Market: Those looking for a decent inexpensive optic with some higher priced features

FNBs:

  • Drop Zone 223 BDC reticle
  • Side parallax adjustment
  • Reset to zero adjustable target style turrets
  • Second focal plane
  • Fully multi-coated optics
  • Finish: Matte Black
  • 1" tube diameter
  • Length (in / mm): 12 / 305
  • Drop Zone-223 BDC Reticle
  • Field of View (ft@100 yds. / m@100 m): 33/8.5@3x / 11/2.5@12x
  • Adj Range in@100yds/ m@100m: +50 / 1.3
  • Weight (oz. / g): 21.3 / 604
  • Exit Pupil (mm): 13.7@3x / 3.7@12x
  • Eye Relief (in / mm): 3.7 / 95
  • Click Value in@100 yds / mm@100m: 0.25 / 6.95
  • Power / Obj Lens: 3-12x 40mm

What other aesthetic options or finishes are available? None, Comes in Matte Black only.

What others are saying?:

Bryan on Amazon: 4 out of 5 stars

Pretty good scope: Install and zeroing were pretty easy. I bought this and the Millett 1 piece mount sold as a combo here on Amazon. The mount allowed forward offset to improve eye relief on my flat top AR. Eye relief (real world) is around 4 inches. The eyepiece is large and the optics art crisp. Both eyes open works great. Not as crisp as the Nikon I have in the same price range but acceptable. There is both a focus and a parallax adjustment to make sure you get the cross-hairs in sharp focus which is nice. The turrets are a little mushy and don't give good tactile feedback but are acceptable. The zoom has no stops which I don't really like and it's pretty high effort which may be the price for a weather seal on this scope. Adjust zoom requires a firm grip on rifle because even with bipod, you need good leverage to change it. So far, it has held a crisp zero through 40 shots and the MOA system is nice for no shoot ranging. This is a good varmint scope IMHO. If it stays as good as it has been while new, I will be very happy.

CavScoutDM on Brownells: 5 out of 5 stars

Great scope @ Unbelievable price: I mounted this scope on my just finished 24" Long Range AR15 and I couldn't be happier. Repeatable, clear, and the BDC works great with just a little practice. Bushnell hit a home run with this one, I just wish I'd seen the 18X as I would have bought it instead of the 12X. No matter though as I said before they knocked it out of the park with this one!

Price point:

I need it now! Availability: Amazon, Brownells, or your local gun shop.

Our Rating:

Pros:

  • Side parallax adjustment
  • Target style turrets
  • Reset to zero turrets
  • Good glass clarity at most magnifications

Cons:

  • Heavy
  • Long length
  • Semi-mushy turret clicks
  • Not super clear at 12x

Score: 7.5 Good75

 

Chad's favorite link: AR15 Podcast 

 

Tasco .22 Rimfire Red Dot Riflescope

IMG_9353IMG_0635It wasn't long ago that red dot sights were rare and expensive pieces of equipment, which were all but unattainable for most shooting enthusiasts. But, over the past decade or so, they've gained tremendous popularity, as the number of options on the market have increased and prices have decreased. It's now possible to purchase a functional red dot sight for less money than a used copy of Call of Duty. This is fantastic news for the frugal gun owner, but the options can be overwhelming. With all of the inexpensive options on the market, how do you know what's worth buying? I found myself in just such a dilemma when I decided I wanted a red dot sight for my newly purchased Ruger 10/22 Carbine. If you spend any time on the internet, you'll quickly realize that most of the commonly recommended red dot sights are more expensive than the 10/22 itself (often they're many times more expensive). Most owners of .22lr rifles are just looking to do some cheap plinking, and would rather buy a few thousand rounds of quality ammunition than a red dot sight designed for military use.

That's where the Tasco BKRD3022 comes in: it's an inexpensive red dot sight designed for use on rimfire rifles. It doesn't offer any frills or a plethora of features - it's just a basic red dot sight meant for plinking. There are only three controls on the entire unit: elevation adjustment, windage adjustment, and power/brightness adjustment.

Elevation and windage can be adjusted in .5 MOA (1/2" at 100 yards) increments. The adjustment knobs are concealed underneath threaded dust caps, and a screw driver or coin is needed to turn them. Each click of the adjustment knob is satisfying, crisp, and light. Make sure you don't lose those dust caps, otherwise you'll likely end up accidentally turning the knobs all the time.

Power and dot brightness are controlled via a large knob located on top of the unit, which gives you 11 different brightness settings. On the lowest settings, battery life is claimed to be 6,000+ hours (250 days) of continuous use. However, the brightness knob ended up being the only thing I didn't like about the Tasco BKRD3022, as I felt it was too difficult to turn. Sure, this will keep you from unintentionally turning it, but it becomes difficult to turn if it's wet from rain or sweat.

So, how does it actually perform? For a red dot sight that can usually be found for about $30, the Tasco BKRD3022 feels and performs very well! The construction is surprisingly solid and durable, and it manages to feel hefty without being heavy (it weighs just 6 ounces). The 1x30mm glass is nice and clear, and the lens coating works well without being too obtrusive.

IMG_9355

With it's 5 MOA dot, it's obvious that this wasn't intended to be used for any kind of serious target shooting (but then again, what red dot sight is?). But, I found it to be more than adequate for my uses. Once zeroed, it was easy to keep 3" groups at 50 yards from my completely stock 10/22 Carbine (and I'm no crack shot). I found the maximum brightness to be suitable for broad daylight, and the lower settings were useful indoors. And, other than one minor mishap, it had no problem staying zeroed.

"What was the mishap?" I'm sure you're asking. A pretty silly mistake on my part: I forgot to put Loctite on the screws for my 10/22 Weaver mount. So, after ~500 rounds or so it started to come lose. The BKRD3022 itself stayed securely fastened to the weaver mount though (because I did remember to use Loctite on that). Obviously, this is not the fault of Tasco, I'm just bringing it up to remind you to always use Loctite! Make sure to use the Blue 242 variety of Loctite, as if you use the green, it will require heat and heavy force to remove and you would risk damaging your gun, sight, or both.

All in all, I've been very satisfied with the Tasco BKRD3022. For the price (which really is "bargain basement"), I think you'd be hard pressed to find a better red dot sight. In fact, I think you could spend 2 or 3 times as much and still not find anything better.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The price

Target Market: .22lr rifle plinkers

FNBs (Features & Benefits of this product):

  • Low cost
  • Brightness Adjustability
  • Battery life
  • Easy mounting

What other aesthetic options or finishes are available?: The Tasco 22 Rimfire Red Dot Riflescope is only available in black.

What are others saying?: 

  • "The Tasco Red Dot sight is the company’s basic entrant in the red dot sight competition, and is a pretty good choice for desert- and snow-dwelling target shooters, or anyone operating under heavy glare" - RedDotSights
  • "The Tasco Red Dot feels nice and sturdy, I dont expect it to break on me anytime soon. I've bumped it into a few things over the months that I've owned it and haven't seen a loss in accuracy, nor have I had to re-zero it." The XtremeConditioning Blog

Price Point:

I need it now! Availability: Amazon

Our Rating:

Pros:

  • Very low price
  • Solid construction
  • Good performance

Cons:

  • Brightness knob is hard to adjust
  • Need coin/screwdriver for elevation and windage adjustment
  • Loctite is basically a necessity

Score: 7.5 Good75

 

Cameron's links:

Serial Hobbyism

Burris Predator Quest 4.5-14x42mm Scope

  Burris Predator Quest Scope

What makes one particular scope more suited for hunting predatory animals than other scopes? Its a valid question.  After all, if any given hunting/field scope gives you the ability to hit a deer-sized target at 100 yards, it should be fine for coyotes, right? Well, yes it should. Most hunters will take small game using a rifle/scope setup that is no different then their big game rig or even their range plinker. Any optic could be used for predators, but there are certain unique aspects of this kind of specialized hunting, and a scope can be built around those factors to give an edge to the shooter.

Burris Predator Quest Scope

Predator hunting is a lot different than hunting a 'prey animal' in a few ways. Coyotes and Bobcats have keen senses to spot and stalk their own prey, which makes it very hard to stalk them in return. Typically its either 'spot and shoot' or use a caller/decoy to lure them close enough for a shot from a concealed positon. The opportunity for that shot is extremely shorter and quicker than with any other game because of the clever, skittish nature of these animals. Sometimes the coyote will be running along your perimeter at a brisk pace, at range, and that is the only opportunity it will lend you. Or maybe its a bobcat sitting patiently and statuesque at the end of a windy field, defiant to come any closer. Being a great shot and having plenty of luck is preferred, but having a scope specialized for the conditions is what could mean the difference to not taking a shot out of doubt, or splattering the dirt all around the 'ol Wiley as he high tails it into the next county.

Burris Predator Quest 4.5-14x42mm

The Burris Predator Quest scope is designed to give the predator hunter a better tool for the job. The optic is backed by Les Johnson, a world champion coyote caller who's been on numerous award winning television programs on the Sportsmans Channel. While I'm sure Les is a good hunter and decent shot, his history with scope endorsements is a tad shaky. In short summation, the brand Predator Quest started with Les' first video in 2004, and his first scope endorsement was picked up by Simmons. I have not personally tested one, but from other reviews on various predator hunting forums online, the quality was wanting and many reviewers warned others from wasting their money. Thankfully the power of consumer and industry feedback response led to the Predator Quest line being picked up by Burris Optics.

Burris Predator Quest Scope

Burris Predator Quest Specs

It doesn't take a keen investigator to see that the Burris Predator Quest scope is essentially the Fullfield E1 scope with a snazzy graphic of the Predator Quest logo, optional camouflage finish, and an included ARD (Anti Reflective Device) that screws onto the objective end of the scope to cut down glare that could spook critters. Burris just chooses to not call it the Fullfield E1 - Les Johnson Signature Predator Quest Edition. That is a mouthful after all. Despite the reskinning of an existing product, the Predator Quest scope carries features that lend themselves to predator hunting. Available in 2-7x, 3-9x and 4.5-14x there is enough magnification power variety to suit the sub 100 yard rabbit hunters, the 200 yard max varmint cullers, or the short to long range quick encounters where wind and drop will be the biggest obstacles.

Burris Ballistic Plex E1 Reticle

The Ballistic Plex E1 is Burris' flagship crosshair for hunting riflescopes these days. Its designed to help shooters overcome two of the biggest challenges when shooting long-distance: determining holdover at distance and compensation for wind drift. It is a BDC system (ballistic drop compensation) and the four hash marks on the lower vertical crosshair are calibrated to provide aiming points from 100 to 500 yards for many of the 'most common' hunting cartridges. Becoming more familiar with MOA-EBR style reticles, BDC systems have fallen out of favor in my collection, however I do see their validity when used in the field for lightning-fast compensations, as long as the shooter is confident their exact load of choice will impact where they are expected in relation to the reticle's factory determined 'guesstimation.'

As for compensating for that pesky crosswind that will push most .22 calibers around like child's play, the E1 reticle has cascading dots on either side of each elevation hashmark to give the shooter a left or right holdover mark for a 10mph crosswind. For different angles or speeds of gusts the shooter can split or multiply the distance between the dot and the vertical crosshair. Fortunately the day I went to zero this scope on my Savage 22-250 was quite gusty, however without a meter to accurately read the wind speed my shots at 300 and 500 yards opened up quite a bit. Still on paper, which means on coyote... but the faster velocity of the 22-250 resists the wind better, especially with higher BC projectiles so the points of reference weren't dead-on exact but close enough to walk a few in where I wanted.

While you can't bank on the windage dots to deliver minute of angle results because of variables like fluctuating gust strength, velocity and ballistic coefficients, etc, they do offer another benefit when trying to squeeze in one desperate shot on a fleeing coyote or bobcat. Instead of using your best 'Kentucky Windage' to lead the scrambling varmint, you can use the windage points as point of aim reference. You may only get 1-2 shots before the Songdog reaches a sanctuary, so being able to track and lead the moving target at 200-500 yards with the E1 reticle is definitely alot easier than using a duplex or other traditional crosshair.

The overall fit and finish of the Predator Quest scope was very satisfactory. The Realtree Max 1 Camo finish is very effective (and matched my Savage very well) with matte black turrets and magnification adjustment ring that give it a nice contrast. Adjusting the magnification ring is smooth with a good resistance, the ring itself has scallops for grip texture I found to be positive enough for adjustments in the field. The parallax adjustment was not ideal, being a ring on the 42mm objective bell that was difficult to turn.  Additionally, the camo finish makes it hard to see the yardage marking, while the matte black version had red colored yardages that are easier to read. It makes me want to set it at one setting and not touch it, trying to focus in on an animal means taking your supporting hand and even your head off the stock... this scope would have been so much better if it had a side parallax adjustment turret! Perhaps I'm just spoiled with higher end optics, but being able to adjust parallax without breaking cheek-weld or ready-position seems like a darn good idea for a predator scope, where seconds matter and fumbling fingers mean missed success.

The elevation and windage turrets are pretty decent. Being capped helps prevent shifting from zero during transport/handling/storage. The clicks are 1/4" MOA and have a nice detent that are entirely finger adjustable, and are audible and tangible as well.

Burris Predator Quest Scope

Lastly, the glass quality of the Predator Quest is on par with it's price bracket. The lenses are Index-Matched, and have a Hi-Lume® multi-coating that provide enhanced light transmission in low light environments and glare-resistance. With the addition of the screw-on Anti-Reflection Device, Burris really wanted to be sure no glints of glare from the sun off the objective lens would spook off foxes or coyotes. I like the addition of the ARD, and the fact it is removable. I would be afraid that an errant stick or perhaps careless storage practices would cause the thin honeycombs of the ARD to become damaged fairly easily, so scope caps are probably a wise investment.

 

Burris Predator Quest Scope

Overall, I am already quite fond of this scope. I was really interested in testing/evaluating it, because it seemed like a good match for my Savage rifle, and also I could find no other reviews on the scope online. The mystery and curiosity finally got me to pull the trigger with my credit card, and I feel like it was a gamble that paid off. Despite the few personal preferences/dislikes I have found, its still a great option for a predator/varmint rifle in .223, 22-250, .243, or other popular calibers suited for small game.

Firearms Insider Reviews – 8 Key Points

Claim to Fame:  World Champion coyote caller Les Johnson and Burris have teamed up to produce a riflescope uniquely designed to take out fast-moving predators.

Target Market:  Varmint Hunters

FNBs (Features & Benefits of this product):

  • Also available in 2-7x35mm and 3-9x40mm at different price points
  • Ballistic Plex E1 reticle: compensate for wind, elevation, moving targets out to 500 yards.
  • First-rate glass
  • Index-Matched Lenses
  • Hi-Lume® multi-coating, glare-resistant
  • Capped Turrets
  • Screw-on Anti-Reflection Device
  • Nitrogen-purged, Waterproof, Shock and Vibration proof
  • Burris Forever Warranty

What other aesthetic options or finishes are available?: Matte Black or Camo (Realtree Max1)

What others are saying?:

 No other reviews found

Price point:

I need it now! Availability:  Readily available online at Brownells or Optics Planet

Our Rating:

Pros:

  • Elevation and Windage turrets are solid - slight turn resistance and detents for positive adjustments
  • Included ARD (honeycomb) is a nice addition, can slip scope cap over both
  • E1 Reticle is clean and useful for acquiring moving targets and doping for wind

Cons:

  • Parallax adjustment is difficult - a large ring forward towards objective, really hard to turn and bumps/texture not deep enough for grip. A side knob would have been much more ideal / hold scope back from a more perfect score.
  • Parallax yardage markings are difficult to read with camo finish - easier with matte black version
  • Glass clarity is good, noticeably less bright/clear than other competitors but on par with others in price point.

Score: 7.5 Good

 

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Vortex Viper PST 1-4x24mm Scope

  Vortex Viper PST 1-4 x 24mm

Yet another Vortex optic has snuck itself into my collection, this time its the variable low-power option of the Viper 1-4x24mm. This scope is at home on top of almost any carbine or low to intermediate range rifle. While 4x magnification isn't generally enough for MOA sized groups past 100 yards, this scope is meant for efficiency and speed. Weighing in at 16.2 ounces, this optic isn't the lightweight in it's class... but it's built with the same strength, glass clarity and dependability of the other scopes in the Viper PST line, which is to say very impressive for the price point.

Vortex Viper PST 1-4 x 24mm

For the same cost of a military-grade red dot scope, this Viper gives you the benefit of both a red dot and a low power scope.  The TMCQ (Tactical Milling Close Quarter) MOA (Minute of Angle) reticle is designed for close to mid-range shooting situations, as well as effectively estimating ranges, holdovers, and windage for longer pokes. At short range distances inside of 25 yards I could shoot with both eyes open at the lowest 1x magnification setting, using the reticle's thick circle and illumination with a 10 brightness setting rheostat. One major issue with most red dots or even holographic sights is that under intense bright conditions, the dot/reticle can almost disappear if you aren't in the shade. The Viper has a reticle with a thick 22 MOA circle thats etched onto the glass. I have actually rarely used the illumination as it's not often been needed, however it is useful and well executed. The clicks on the rheostat are very positive, with each step in between brightness settings being an off setting, so its easy to activate the illumination to the last setting used by one click either left or right. The thick circle glows bright and fills the role of a 1x red dot very nicely. At 1x, the distance for eye relief is a generous 4 inches, which again draws comparison to the function of a red dot.

Vortex Viper PST 1-4 x 24mm

At intermediate ranges between 50–175 yards, the extra magnification helps despite being only 4x. Zeroing the optic at 100 yards as opposed to 50 yards will lessen hold over needed at 200 yards, you just have to remember your point of impact will be between 1-2 inches lower than point of aim at closer ranges. While a 1-4x scope would seem underpowered for distances approaching 200 yards and beyond to most shooters, the reticle subtensions on this Viper are set MOA (minutes of angle) and make compensating bullet drop an easy task as long as you understand what your bullet is doing, in terms of velocity and inches of drop.  The lines of the reticle are thin, so if you are not accustomed to fine lines and small numbers, or have 'old, tired eyes' you may find yourself passing this scope over. But the thin width of the lines makes for finer aiming, and hopefully smaller groups on paper. There are 30 minutes worth of holdover dash marks on the reticle for both elevation and windage, which could lend itself to the 5.56 55 grain bullet reach outwards to 600 yards as far as drop is concerned, with plenty of windage marks. A simple brushing up on the MOA system of measurement and getting to know your gun's caliber trajectory will get you the most out of this reticles potential.

Vortex Viper PST 1-4 x 24mm

While this isn't a magical do-it-all scope, the ability to engage targets from 25 yards to 600 yards (depending on caliber/load) is within the realm of possibility for this scope. It's understandable how this scope has become a favorite of competitive shooters when drilling close range cardboard targets one minute and knocking down steel targets at 100+ yards the next. The 30mm tube lets in more light than 1 inch tubes conventionally, and the glass clarity is on par with the rest of the Vortex Viper PST family, which is arguably also equivalent or surpassing of most competitor scopes, certainly those who fall below the price point. You do get what you pay for when shopping for scopes, and a lifetime guarantee and overall quality and longevity you get from a Vortex optic is one of the best bangs you can get for your buck these days.

 

Firearms Insider Reviews – 8 Key Points

Claim to Fame:  The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, and delivers the performance and features tactical shooters demand at an economical price.

Target Market:  Range Shooters, Hunters, 3-Gun Competitors

FNBs (Features & Benefits of this product):

  • Extra-low dispersion (XD) glass increases resolution and color fidelity, resulting in crisp, sharp images
  • Proprietary coatings increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces
  • TMCQ (Tactical Milling Close Quarter) is a hashmarked ranging reticle using MOA-based subtension lines for ranging, holdover, and windage corrections
  • 220 total minutes of adjustment for elevation and windage each
  • Field of View: 98(1x)-27.5(3x) feet at 100 yards
  • Eye relief approx 4 inches.
  • Reticle protected between two layers of glass for optimum durability and reliability
  • Illuminated reticle provides precise aiming under low-light conditions
  • Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt

What other aesthetic options or finishes are available?: Capped and Uncapped versions

What others are saying?:

 "Bolted this baby on my 20" flattop and couldn't be happier! Zeroed in easily and hasn't missed a beat in aprox 1000 rounds. Battery life is good, still on the original. Acquiring sight picture while illuminated is QUICK! Reticle is very fine and clear allowing me shoot 100yd moa groups off the bipod at will. Customer service is stellar at Vortex, friendly folks on the phone. " - Stickman User Review, vortexoptics.com

"The reticle is easy to see and a great size. While the illumination is not visible in daylight, it does provide a contrast in a situation where the crosshairs would otherwise get blacked out. Perfectly illuminated for night time. I love the "CQ" part of the reticle which is, in my humble opinion, better than the solid round EOTech reticle that tends to be "too busy" for my taste. The glass is very clear, and in fact in 1x it's clearer than some red dots I've used! The 1x is a true one 1x. Knobs are easy to grasp, adjust, set markings to zero, re-zero, etc., etc. Clear markings all around including magnification knob. All around, I can't find anything to complain about, and I expect my next scope will be a higher power Vortex PST MOA for my .308 bolt action. Can I give a better endorsement than that?" jkrispies user, brownells.com

Price point:

I need it now! Availability:  Readily available online at Brownells and most sporting goods stores.

Our Rating:

Pros:

  • Design and Function are a perfect match for a carbine to midlength AR-15 platform, especially in the weight department
  • Glass is very clear for a 24mm objective
  • Eye relief is approx 4 inches
  • Reticle can both serve as a 1x Red Dot or capable of mid range shooting
  • Water/fog/shock proof
  • Nice tactile and well marked turrets
  • CRS Zero stop feature
  • Great Warranty, lifetime no questions asked.

Cons:

  •  Illumination of center circle/dot of reticle is okay, but does not fully illuminate elevation hashes all the way to 30 MOA on either end, but does illuminate the full width of the windage marks.

Score: 9.0 Amazing90

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design