rifle

AR Build: A young woman's perspective

A young woman’s perspective on building an AR15

  So I pitched the idea of building an AR to my daughter and writing something about it. She thought it would be fun. I am not sure if she was humoring me or not. But either way, here we are with an awesome AR15, that she built herself. A special thank you goes out to all the great companies that helped sponsor this build, you can read about their parts later in the story. 

From Zoe:

 Putting together my AR was much more interactive than I expected it to be. In a way it was simple, yet complex. Many little pieces combine together like a delicate puzzle, but also a straightforward process to get to the final outcome. There were many different steps to complete to bring it all together. One of the most tedious was putting all the pins into place! Those slippery little rascals!

  When putting the AR together, all of the parts fit perfectly. Between all the different parts, and parts kits, almost everything needed was there, even little tools for some of the steps! Everything was beginner friendly (although having my father assisting me helped a ton). I enjoyed the experience and the reward was incredibly worth the time put into it. Building the AR also helped me feel closer to my dad and the big parts of his life. As a young woman, knowing that there are places that put these part kits together brought me a sense of safety. I am able to build something to provide protection for myself. Plus I got to learn the intimate process of building it, in turn making me a safer firearms owner and a safer young woman.

  Shooting it was a lovely experience. The parts used were all relatively light in mass and resulted in a very lightweight gun. Having to hold it for long periods was undemanding. Shooting it was like a well polished machine. There was very little recoil when firing the rifle. It also functioned flawlessly and did not jam. One thing that I did struggle with was pulling back the charging handle. Which can be a common issue as a woman, since our upper body strength is usually lower than are male counterparts. Charging the firearm is easier than other guns I have shot because of the larger size charging handle. All of the parts worked as expected and I was very satisfied with the experience as a whole. 

  I am so grateful to have had this opportunity. It provided me with important skills, and knowledge of firearms, that I did not have before building this AR. To any young woman who feels she needs confidence and a sense of security, I would highly recommend learning the safety and process of building a firearm. There are things out there to make life a little safer, and I believe this is one of those. 

Stay safe out there ladies.

Sponsored parts used in Zoe's AR build:

This AR15 is built for .223/5.56, so everything listed below is for that particle caliber rifle.

  When it comes to AR parts, there are many. We were fortunate to have some great sponsors who supplied top notch parts for this build. A lot of these are colorful, literally, but they are all high quality parts. 

  First up is the backbone of any AR build, the lower receiver. Our friends over at Foxtrot Mike Products sent one of their stripped lowers. These are billet receivers with a slightly enlarged trigger guard and a semi built-in magazine well. The Magazine well is 3D machined to give it a super smooth transition when loading magazines into the rifle. The Foxtrot Mike lower has a bunch of small added features that make it a little nicer than your run of the mill lower receiver. One of those is the ability to run a ball detent on the safety. That little detail makes a safety selector work so much smoother. 

  Since that lower receiver needs parts to make it function, ArmaSpec sent a stainless Lower Parts Kit (LPK) and their Stealth Recoil Spring. ArmaSpec’s LPK is one of my favorites. It comes with an ambi safety selector that does 45 and 90 degree throws. We did not use the ambi selector in this build, but I did install it elsewhere. All the springs and detents in the LPK are well made and I have no doubt that they will give the rifle years of use. The Stealth Recoil spring, that ArmaSpec manufactures, is a wonderful piece of equipment. Its complete unit replaces the conventional AR buffer and spring. It is called “Stealth” because it reduces the “twang” noise sometimes heard in normal AR’s. The Stealth Recoil system smooths out the cycling of the firearm and also reduces recoil, which was noticeable by how soft this AR shoots.

  If you want a barrel and need it to look fancy, Faxon Firearms has you covered. Since Zoe wanted something “pretty”, we went looking. Faxon has a match grade 16” Gunner series barrel that happens to come in “Chameleon” PVD. This color option fades from pink to purple, to blue, and then to gold. A perfect option for someone wanting color. It also looks amazing under the Robin Egg blue color scheme. Faxon also sent a gas tube and a 0.625” gas block to round out the package. This barrel is not only super accurate, but it is fairly lightweight too.

  When you are building an AR of this quality, you do not want to skimp on the Bolt Carrier Group (BCG). After all, this is what makes the firearm function. Walker Defense sent us one of their Nickel Boron BCG’s. Nickel Boron provides enhanced reliability, easier cleaning, and better lubricity. Walker’s BCG is super slick, literally, and has all the top tier options someone would want. It uses a properly hardened 9310 bolt, has properly staked OCKS screws, is magnetic particle inspected, uses a hard chrome firing pin, and has a M16 carrier profile. Walker Defense’s products are also 100% made in the USA with US components. 

  To finish out the build, and add a whole lot of color, Timber Creek sent an Enforcer build kit. These are fairly lightweight kits which work well when you are worried about the final weight of the rifle. Zoe opted for the Robin Egg Blue cerakote color version. The Enforcer kit comes with a ton of parts for your build. In this case, the Robin Egg Blue parts we used were the 15” handguard, pistol grip, charging handle, safety selector, buffer tube, end plate, port door, extended mag release, forward assist, and takedown pins. We also used the supplied muzzle brake, but it only comes in basic black. Timber Creek's Enforcer kit also comes with a 0.750 gas block, which we didn't use due to using a 0.625 barrel. We also did not use the trigger guard since we used a billet lower that has the trigger guard built in. 

  I want to mention two things about the Enforcer kit. First up is the Ultra Light M-Lok handguard. These handguards, by themselves, are stupid lightweight. They also have holes for QD swivels. Making it easier to add a sling. There are also plenty of M-Lok slots along the whole rail for adding whatever you want. The second thing I want to mention is the oversized charging handle. This handle is significantly larger than most. Zoe mentioned it made charging the rifle easier due to its size. I had never thought of this, but because you can get a good grip on it, it works better for those that have a smaller stature. 

  As we all know, you need a way of aiming a rifle. Since this AR is not being used for distance shooting, She opted for a red dot. Why? Because it is lighter than a 1x prism sight. Primary Arms Optics sent us one of their MD-25's with the 2 MOA dot. The Primary Arms MD-25 is a great red dot. It has a large window size and is pretty lightweight. Battery life is really good thanks to it having Primary Arms’ Autolive function. The Autolive turns the dot off after a few minutes of non use, and then turns it back on when it gets moved. The MD-25 is a great option for a defensive rifle. 

  Now you may have noticed that we are missing a few parts. We supplied the stripped upper receiver, stock, and trigger. Most stripped uppers are very similar and fairly cheap, so I just purchased one. When it comes to stocks, there are a lot of personal preferences. We just opted for a Hogue AR stock. They lock up tight, have a good feel, and are inexpensive. If you noticed, the LPK was not one that included a trigger. I had a TriggerTech Duty Trigger laying around. It is the 3.5lb version. This trigger is a really good option for someone that doesn't shoot a lot. Yes, it feels really good, but with the 3.5lb pull weight, it works well for beginners and seasoned pros alike. 

  Now my daughter has her own AR15. The experience of helping her build her own rifle will not be forgotten anytime soon. She has a life saving tool that will give her a lifetime of protection and enjoyment. 

Defense Mechanisms 2 point Sling

  Defense Mechanisms (DM for short) is a newer company that makes quality gear and tactical products. DM is a company that likes to improve on existing technology. One of their products is a 2-point rifle sling. Yes, they improved upon the Vickers style sling and improved it’s functionality.

  If you use a long gun for any amount of time, you realize that you need a sling. A sling can be a simple way to wear your rifle from point A to point B. Or it can be an added support, to help stabilize a rifle, especially in non standard shooting positions. Either way, DM’s sling has you covered for just about any situation where a sling is needed. 

  Defense Mechanisms sling looks quite simple, and it is. But it has so many other functions that really set it ahead of the rest. Being a Vickers style sling, it has a quick adjustment “handle” at the front of the sling. This makes for effortless and quick adjustments in length. You can pull it shorter to make the rifle fit tight up against your chest, then quickly pull the handle to loosen it up and get into a shooting position. This pull tab handle sits out from the rifle, making it easier to locate than the flatter style seen on a lot of 2 point slings. If your hand is on the handguard, it just kind of naturally runs into the adjuster, at least that’s how it felt to me.

  The DM Sling is made from quality materials. It uses a 1” wide webbing that is extremely strong and doesn’t stretch like some of the less expensive ones. When I first looked at the webbing, I was concerned that it may be uncomfortable on the skin. To my surprise, it is more comfortable than I expected. It’s still a tad bit rough on my skin, but all slings are that way to some extent. The comfort is still a bonus when wearing a rifle sling all day long. Since the webbing doesn’t stretch, it makes for an extremely strong, and tight sling when in use. A tight sling equals a tight support. The sling can also be had in a variety of colors and patterns. I opted for MultiCam Tropic, mainly because it looks better in photos for the review, plus I like it.

  An option when purchasing the DM sling is QD swivels. I opted for the QD swivels. I wanted to see what the sling was like when completely outfitted from DM. The swivels are good quality. They are the half curved style, which work well when quickly adjusting the sling. Plus, since they are QD, the sling is easy to take off or move to different mounting positions.

  Storage of a sling, when on a firearm, is always problematic. DM has essentially cured this problem with the addition of built in storage straps. I will say, this is my favorite aspect of the sling. By sewing on, and putting elastic webbing (keepers) around the sling, DM has managed to make the sling tightly storable on the firearm. This allows the sling to be tight up against the side of the firearm and out of the way. Depending on where the sling is mounted, it also gives complete access to the safety and trigger of an AR style rifle, without the sling getting in the way! Having use of the rifle before engaging the sling, can be very useful, especially if leaving a vehicle in a hurry. To aid in the stowage of the sling, DM attached a pull “dongle”. This dongle aids in pulling the sling through the elastic keepers and works quite well. If you run the dongle back through the keeper, it also functions as a pull handle to yank the sling out of the keepers and back normal (meaning no longer in the storage configuration). Please go check out DM’s instructions, https://defensemechanisms.com/rifle-sling/ , on how to stow the sling, they have pictures and explanations that are way better than I can explain.

  Since we are in an ammunition slump, most of the sling use was in dry fire practice. Don’t get me wrong, dry practice with a sling is extremely important. I got so much better at using a sling when practicing with the DM sling! I was fortunate enough to have some real range time with the sling. I ran it with transition drills, from the stowed option, and from being tight up against my chest. In all of the cases, the DM sling performed great. It was easy to quickly adjust the length when it was tight up against my chest. Quick to pull it back tight too. When working from the sling stowed position, I was able to use the rifle as intended. Because of where the sling is mounted on my rifle, it slightly covers the safety selector. I wasn’t keen on this, but during use, it didn’t seem to affect manipulation of the controls. The sling dongle also made it easily return to the normal sling use position. All in all, the Defense Mechanisms sling works well

  The Defense Mechanisms 2 point sling is a nice option. I was pleased with how well it functions. The built in storage capability is a huge addition and keeps you from having to purchase other pieces to do the same thing. It has plenty of pattern options to match your gear preference. At $40, it is priced superbly for what you get. So if you are looking at a useful 2 point sling, go check out Defense Mechanisms.


Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Fast adjustable 2 point sling with containment features

Target Market:

Anyone needing a 2 point rifle sling

FNBs (Features & Benefits of this product):

  • 1” wide Webbing

  • Captured adjustment tab for quick indexing and adjustment

  • Minimalist design

  • Elastic keepers for easy stowage

  • Pull dongle for easy release from self storage

  • Optional QD swivels

What other aesthetic options or finishes are available?

Black, Ranger Green, Coyote, Multicam, Multicam Arid, Multicam Black, Woodland, Wolf Grey

What others are saying?:

5/5 Stars - JC at DefenseMechanisms

I have a lot of slings and as far as functionality this is hands down the best one I have. The self storage issue is one that has plagued me for years. Defense Mechanisms got this right!!! Affordable price as well. I will be telling everyone I know about this sling.

Link to other reviews:

GunMagWarehouse

Price point:

MSRP = $40.00

As Tested = $55.00 (extra $15 is for QD sling swivels)

I need it now! Availability:

Defense Mechanisms

Our Rating:

Pros:

  • Built in storage

  • Easy to use adjustment slider

  • QD swivels

  • Rapid release from storage

  • Strong webbing

Cons:

  • 1” wide (I like slightly wider)

  • When stored, can cover some controls

Score: 8.50 Great

85.jpg

Favorite Link:  Atibal Optics

Axeon Optics 4-12x40 rifle scope

 Axeon optics is a newer company with some interesting optic products, but they also make normal scopes. They sent me one of their 4-12x40 scopes for review. Axeon is distributed by Umarex USA. I thought this would be great to try on my .17hmr rifle. So off I went to mount it up.

 I first want to mention that this is a budget scope, so I am comparing it to other budget scopes that I have used. The Axeon has the old standby Plex reticle. I personally think plex style reticles are fine, but I prefer some sort of ranging reticle. The reticle is in the second focal plane, so it stays the same visual size throughout the magnification spectrum. As stated, this is a variable 4-12 power scope with a 40mm objective lens. It also uses a 1” main tube. It does not have a fast focus eyepiece. I tend to set the focus and leave it alone anyhow.

 The Axeon scope does have some decent features. It comes with fully coated “green” optics. The green is the actual color of the coatings. The coating seemed to give really good light transmission through the scope, even at 12 power. Clarity was nice and sharp also. So much so that I could see the little 17 caliber holes at 100yds. Axeon also throws in a set of flip covers, and they aren’t so bad that you want to toss them away. The magnification adjustment knob is also really smooth. This makes it really nice to switch magnification while looking through the scope.

Taken at 4x - Target board is 100yds

Taken at 12x - Target board is 100yds

 For windage and elevation adjustments, Axeon uses capped turrets. The caps screw on and off easily. Underneath the caps are the actual ¼ MOA adjustment knobs. The knobs are plastic, but have a decent grip to them, this made turning the knob easy. Now for the really bad part. The click adjustments are terrible. They can barely be felt. So much so that I couldn’t really tell if I went one click or four. Even with this, the scope held it’s zero every time I used it.

 The rest of the specifications are down below, so I won’t bore you with them here.

 If you are in the market for a budget scope, go at least look at Axeon. If the adjustments were better, it would be a good little scope. It has some decent features. it just needs a little refinement.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Inexpensive quality scope

Target Market:

Those wanting an entry level optic

FNBs (Features & Benefits of this product):

  • 4-12 power magnification

  • Plex reticle

  • Multi coated Green optics

  • 40mm Objective lens

  • 1” main tube

  • 13.25 ounces

  • 11.875” in length

  • 3.5”-4” eye relief

  • Field of View - 25f eet @ 4x, 8.3 feet at 12x

  • ¼ moa adjustments

  • 30 moa windage and elevation adjustments

  • Waterproof

  • Shockproof

  • Fogproof

What other aesthetic options or finishes are available?

2-7x32 and 3-9x40

What others are saying?:

Nothing found

Link to other reviews:

None found

Price point:

MSRP = $138.99

Retail =$118.67 on Amazon

I need it now! Availability:

Axeon or Amazon

Our Rating:

Pros:

  • Large field of view

  • Flip caps included

  • Good light transmission

Cons:

  • Duplex reticle

  • Non-positive clicks on adjustments

  • Made in China

Score: 6.5 Okay

65.jpg

Favorite Link:   Thor Targets

Xtreme Hardcore Gear Force Recon Tactical Rings

Xtreme Hardcore Gear Force Recon Tactical Scope Rings

When you are dumping money into a precision rifle, whether it be an AR-15, AR-10, or bolt action platform, theres a saying that goes "spend two times the amount of the gun on the optic." Easier said than done if you do in fact mind sleeping on the couch for a week. No matter what you spend on the rifle itself or the glass, they still have to interface together. The scope rings are just as important, as they determine how true the relationship will be between where you are aiming, the adjustment of your dope turrets, and where that bullet will go.

Xtreme Hardcore Gear Force Recon Tactical Scope Rings

High quality rings will make sure your scope is and remains mounted securely and consistently shot after shot. Generally speaking, the higher the price tag, the better the machining of the pair of rings to be within tight tolerances and will hold your scope true to the rifle's bore. Of course, if you are canting your rifle or resting on uneven ground, everything goes out the window. Thats where a bubble level comes into play. There are a handful of scope level products on the market, either clamping onto the scope tube or mounting via picatinny rail somewhere on the rings. I've seen plenty of rifles with them, and I have a couple on my own tack drivers. What I haven't seen is a premium quality scope ring with an integral bubble level... until I found the Xtreme Hardcore Gear Force Recon Tactical Rings.

Xtreme Hardcore Gear Force Recon Tactical Scope Rings

Besides being a mouthful, the Xtreme Hardcore Gear Force Recon Tactical Rings are one of the only sets of scope rings I've seen to both be of high quality, and integrate the bubble level. At around $180 they are certainly a premium, but perfect for a high dollar rifle that's purposefully built for small groups at long ranges. A scope won't track correctly along the X and Y axis (windage and elevation) if your scope and bore aren't perpendicular with the ground, thats a simple as I can put it. Firing a bullet from an non-level position will skew that bullets course exponentially the longer the distance, and your scope's tracking adjustments will be diagonally "hinky" as well.

Xtreme Hardcore Gear Force Recon Tactical Scope Rings

In addition to the integral bubble level, these rings offer a level of precision only rivaled by $200+ ring sets. The Xtreme Hardcore rings are designed and machined to not allow the scope to move under any recoil scenario. The rings interface with the rail with a robust .875" mounting platform while the two cross slot bolts provide awesome clamping power without any protruding bolt heads. The cherry on top is the pair of steel guide rails that press into the ring base. The ring base clamp rides on these rails to keep the clamp perfectly aligned as the two cross slot bolts are drawn tight against the pic mount.  Another detail I appreciate is the rings and caps have a .030" radius on both sides of the scope bore to eliminate any marring or sharp contact points on your scope. Together with the provided 6 torx bolts for an evenly distributed force onto the top of the scope, these features add up to the best scope rings you can buy for precision work.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The Force Recon Tactical Rings feature a built in level housed into the rear scope ring, assuring a perfect parallel which is essential for long range shooting.

Target Market:  Long range rifle shooters

FNBs (Features & Benefits of this product):

  • Ring Bore Diameter 30mm with tolerances +/-.001"
  • USA Mills Billet 7075 T-6 Aircraft Aluminum
  • Black Anodize Mill Spec 8625 Type 3 Hardcoat
  • Rings are matched within .002"
  • 6 Cap Screws (USA 8-40)
  • 2 Clamp Screws (USA 10-24 SHC Grade 8)
  • 2 Clamp guide Rails: (USA .125 Precision dowel pins)

What other aesthetic options or finishes are available?: Black, 30 & 34mm diameter

What others are saying?: "While field testing, we found the bubble easy enough to see while sighting through the scope. Under very low light conditions, it took a little more effort to focus on the reference lines, most likely because the level isn’t exposed to any light from the top or bottom of the ring. At any rate, it didn’t interfere with the ability to make accurate long range shots at last light. In conclusion, if you’re looking for a set of very high quality rings for your long range rig, you owe it to yourself to check these out. The price point is comparable to other quality rings that require the additional purchase of an add-on bubble level.  You can purchase the the Force Recon Tactical Scope Rings here: Xtreme Hardcore Gear." Rockslide Blog

"I mounted each ring on my Badger scope rail and then did an alignment check with a 34mm lapping bar. Then I checked the alignment with a set of scope alignment bars and they were Dead On. The rings mounted Rock Solid and look Great. The level is calibrated perfect and there is no issues with these rings. These rings are of Excellent quality and I would highly reccomend these for any Tactical build. I like the fact that they are the lowest available for a 34mm scope. At .900" height they put my eye right on with my McMillan A5 stock." Sniper's Hide Review

Price point:

I need it now! Availability: Brownells or Amazon

Our Rating:

Pros:

  • Level verifies action/bore and scope are perpendicular with ground / shooting rest is level.
  • Less play forward/aft on picatinny rail before screw full torqued
  • Base clamp rides on stainless steel guide rails keeping the clamp perfectly aligned
  • 6 Torx bolts make a good solid mount
  • Rings and caps radiused on both sides to eliminate any marring or sharp contact points

Cons:

  • Clamp Screws used as crossbolt (some folks don't like this)
  • Bubble location makes visibility difficult in low light

Score: 8.5 Great

 

 

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Tasco .22 Rimfire Red Dot Riflescope

IMG_9353IMG_0635It wasn't long ago that red dot sights were rare and expensive pieces of equipment, which were all but unattainable for most shooting enthusiasts. But, over the past decade or so, they've gained tremendous popularity, as the number of options on the market have increased and prices have decreased. It's now possible to purchase a functional red dot sight for less money than a used copy of Call of Duty. This is fantastic news for the frugal gun owner, but the options can be overwhelming. With all of the inexpensive options on the market, how do you know what's worth buying? I found myself in just such a dilemma when I decided I wanted a red dot sight for my newly purchased Ruger 10/22 Carbine. If you spend any time on the internet, you'll quickly realize that most of the commonly recommended red dot sights are more expensive than the 10/22 itself (often they're many times more expensive). Most owners of .22lr rifles are just looking to do some cheap plinking, and would rather buy a few thousand rounds of quality ammunition than a red dot sight designed for military use.

That's where the Tasco BKRD3022 comes in: it's an inexpensive red dot sight designed for use on rimfire rifles. It doesn't offer any frills or a plethora of features - it's just a basic red dot sight meant for plinking. There are only three controls on the entire unit: elevation adjustment, windage adjustment, and power/brightness adjustment.

Elevation and windage can be adjusted in .5 MOA (1/2" at 100 yards) increments. The adjustment knobs are concealed underneath threaded dust caps, and a screw driver or coin is needed to turn them. Each click of the adjustment knob is satisfying, crisp, and light. Make sure you don't lose those dust caps, otherwise you'll likely end up accidentally turning the knobs all the time.

Power and dot brightness are controlled via a large knob located on top of the unit, which gives you 11 different brightness settings. On the lowest settings, battery life is claimed to be 6,000+ hours (250 days) of continuous use. However, the brightness knob ended up being the only thing I didn't like about the Tasco BKRD3022, as I felt it was too difficult to turn. Sure, this will keep you from unintentionally turning it, but it becomes difficult to turn if it's wet from rain or sweat.

So, how does it actually perform? For a red dot sight that can usually be found for about $30, the Tasco BKRD3022 feels and performs very well! The construction is surprisingly solid and durable, and it manages to feel hefty without being heavy (it weighs just 6 ounces). The 1x30mm glass is nice and clear, and the lens coating works well without being too obtrusive.

IMG_9355

With it's 5 MOA dot, it's obvious that this wasn't intended to be used for any kind of serious target shooting (but then again, what red dot sight is?). But, I found it to be more than adequate for my uses. Once zeroed, it was easy to keep 3" groups at 50 yards from my completely stock 10/22 Carbine (and I'm no crack shot). I found the maximum brightness to be suitable for broad daylight, and the lower settings were useful indoors. And, other than one minor mishap, it had no problem staying zeroed.

"What was the mishap?" I'm sure you're asking. A pretty silly mistake on my part: I forgot to put Loctite on the screws for my 10/22 Weaver mount. So, after ~500 rounds or so it started to come lose. The BKRD3022 itself stayed securely fastened to the weaver mount though (because I did remember to use Loctite on that). Obviously, this is not the fault of Tasco, I'm just bringing it up to remind you to always use Loctite! Make sure to use the Blue 242 variety of Loctite, as if you use the green, it will require heat and heavy force to remove and you would risk damaging your gun, sight, or both.

All in all, I've been very satisfied with the Tasco BKRD3022. For the price (which really is "bargain basement"), I think you'd be hard pressed to find a better red dot sight. In fact, I think you could spend 2 or 3 times as much and still not find anything better.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The price

Target Market: .22lr rifle plinkers

FNBs (Features & Benefits of this product):

  • Low cost
  • Brightness Adjustability
  • Battery life
  • Easy mounting

What other aesthetic options or finishes are available?: The Tasco 22 Rimfire Red Dot Riflescope is only available in black.

What are others saying?: 

  • "The Tasco Red Dot sight is the company’s basic entrant in the red dot sight competition, and is a pretty good choice for desert- and snow-dwelling target shooters, or anyone operating under heavy glare" - RedDotSights
  • "The Tasco Red Dot feels nice and sturdy, I dont expect it to break on me anytime soon. I've bumped it into a few things over the months that I've owned it and haven't seen a loss in accuracy, nor have I had to re-zero it." The XtremeConditioning Blog

Price Point:

I need it now! Availability: Amazon

Our Rating:

Pros:

  • Very low price
  • Solid construction
  • Good performance

Cons:

  • Brightness knob is hard to adjust
  • Need coin/screwdriver for elevation and windage adjustment
  • Loctite is basically a necessity

Score: 7.5 Good75

 

Cameron's links:

Serial Hobbyism

Vortex Viper PST 1-4x24mm Scope

  Vortex Viper PST 1-4 x 24mm

Yet another Vortex optic has snuck itself into my collection, this time its the variable low-power option of the Viper 1-4x24mm. This scope is at home on top of almost any carbine or low to intermediate range rifle. While 4x magnification isn't generally enough for MOA sized groups past 100 yards, this scope is meant for efficiency and speed. Weighing in at 16.2 ounces, this optic isn't the lightweight in it's class... but it's built with the same strength, glass clarity and dependability of the other scopes in the Viper PST line, which is to say very impressive for the price point.

Vortex Viper PST 1-4 x 24mm

For the same cost of a military-grade red dot scope, this Viper gives you the benefit of both a red dot and a low power scope.  The TMCQ (Tactical Milling Close Quarter) MOA (Minute of Angle) reticle is designed for close to mid-range shooting situations, as well as effectively estimating ranges, holdovers, and windage for longer pokes. At short range distances inside of 25 yards I could shoot with both eyes open at the lowest 1x magnification setting, using the reticle's thick circle and illumination with a 10 brightness setting rheostat. One major issue with most red dots or even holographic sights is that under intense bright conditions, the dot/reticle can almost disappear if you aren't in the shade. The Viper has a reticle with a thick 22 MOA circle thats etched onto the glass. I have actually rarely used the illumination as it's not often been needed, however it is useful and well executed. The clicks on the rheostat are very positive, with each step in between brightness settings being an off setting, so its easy to activate the illumination to the last setting used by one click either left or right. The thick circle glows bright and fills the role of a 1x red dot very nicely. At 1x, the distance for eye relief is a generous 4 inches, which again draws comparison to the function of a red dot.

Vortex Viper PST 1-4 x 24mm

At intermediate ranges between 50–175 yards, the extra magnification helps despite being only 4x. Zeroing the optic at 100 yards as opposed to 50 yards will lessen hold over needed at 200 yards, you just have to remember your point of impact will be between 1-2 inches lower than point of aim at closer ranges. While a 1-4x scope would seem underpowered for distances approaching 200 yards and beyond to most shooters, the reticle subtensions on this Viper are set MOA (minutes of angle) and make compensating bullet drop an easy task as long as you understand what your bullet is doing, in terms of velocity and inches of drop.  The lines of the reticle are thin, so if you are not accustomed to fine lines and small numbers, or have 'old, tired eyes' you may find yourself passing this scope over. But the thin width of the lines makes for finer aiming, and hopefully smaller groups on paper. There are 30 minutes worth of holdover dash marks on the reticle for both elevation and windage, which could lend itself to the 5.56 55 grain bullet reach outwards to 600 yards as far as drop is concerned, with plenty of windage marks. A simple brushing up on the MOA system of measurement and getting to know your gun's caliber trajectory will get you the most out of this reticles potential.

Vortex Viper PST 1-4 x 24mm

While this isn't a magical do-it-all scope, the ability to engage targets from 25 yards to 600 yards (depending on caliber/load) is within the realm of possibility for this scope. It's understandable how this scope has become a favorite of competitive shooters when drilling close range cardboard targets one minute and knocking down steel targets at 100+ yards the next. The 30mm tube lets in more light than 1 inch tubes conventionally, and the glass clarity is on par with the rest of the Vortex Viper PST family, which is arguably also equivalent or surpassing of most competitor scopes, certainly those who fall below the price point. You do get what you pay for when shopping for scopes, and a lifetime guarantee and overall quality and longevity you get from a Vortex optic is one of the best bangs you can get for your buck these days.

 

Firearms Insider Reviews – 8 Key Points

Claim to Fame:  The Viper PST (Precision Shooting Tactical) riflescope boasts features associated with top-tier riflescopes, and delivers the performance and features tactical shooters demand at an economical price.

Target Market:  Range Shooters, Hunters, 3-Gun Competitors

FNBs (Features & Benefits of this product):

  • Extra-low dispersion (XD) glass increases resolution and color fidelity, resulting in crisp, sharp images
  • Proprietary coatings increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces
  • TMCQ (Tactical Milling Close Quarter) is a hashmarked ranging reticle using MOA-based subtension lines for ranging, holdover, and windage corrections
  • 220 total minutes of adjustment for elevation and windage each
  • Field of View: 98(1x)-27.5(3x) feet at 100 yards
  • Eye relief approx 4 inches.
  • Reticle protected between two layers of glass for optimum durability and reliability
  • Illuminated reticle provides precise aiming under low-light conditions
  • Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt

What other aesthetic options or finishes are available?: Capped and Uncapped versions

What others are saying?:

 "Bolted this baby on my 20" flattop and couldn't be happier! Zeroed in easily and hasn't missed a beat in aprox 1000 rounds. Battery life is good, still on the original. Acquiring sight picture while illuminated is QUICK! Reticle is very fine and clear allowing me shoot 100yd moa groups off the bipod at will. Customer service is stellar at Vortex, friendly folks on the phone. " - Stickman User Review, vortexoptics.com

"The reticle is easy to see and a great size. While the illumination is not visible in daylight, it does provide a contrast in a situation where the crosshairs would otherwise get blacked out. Perfectly illuminated for night time. I love the "CQ" part of the reticle which is, in my humble opinion, better than the solid round EOTech reticle that tends to be "too busy" for my taste. The glass is very clear, and in fact in 1x it's clearer than some red dots I've used! The 1x is a true one 1x. Knobs are easy to grasp, adjust, set markings to zero, re-zero, etc., etc. Clear markings all around including magnification knob. All around, I can't find anything to complain about, and I expect my next scope will be a higher power Vortex PST MOA for my .308 bolt action. Can I give a better endorsement than that?" jkrispies user, brownells.com

Price point:

I need it now! Availability:  Readily available online at Brownells and most sporting goods stores.

Our Rating:

Pros:

  • Design and Function are a perfect match for a carbine to midlength AR-15 platform, especially in the weight department
  • Glass is very clear for a 24mm objective
  • Eye relief is approx 4 inches
  • Reticle can both serve as a 1x Red Dot or capable of mid range shooting
  • Water/fog/shock proof
  • Nice tactile and well marked turrets
  • CRS Zero stop feature
  • Great Warranty, lifetime no questions asked.

Cons:

  •  Illumination of center circle/dot of reticle is okay, but does not fully illuminate elevation hashes all the way to 30 MOA on either end, but does illuminate the full width of the windage marks.

Score: 9.0 Amazing90

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

HexMag HX30-AR Magazine Review

dsc_7423Being the host of the AR-15 Podcast, I was asked by the Powers That Be over at the Firearms Insider to take a look at a new MSR magazine offering manufactured by Hexmag. I examined the magazines that arrived and was struck by the feel of these new magazines.  They feel substantial and more durable than some of the lesser quality magazines on the market today.  I think we all know who the 800 pound gorilla in the room is when it comes to polymer magazines, and these seemed quite comparable.  Sure, they don’t have the years of experience working with polymer that the top dog has, but for a first offering, these magazines are real nice. hexid-hero_clipped2One of the chief features that seems to distinguish these magazines from the pack is the inclusion of a purpose designed interchangeable follower/latchplate system called the HexID Color Identification System.  The intent of HexID seems geared to give end users the ability to color code their magazines for quick visual differentiation when they are loaded with different ammunition types or even different calibers.  I like to see manufacturers who are willing to push the envelope and defy convention.

My time at the range with the Hexmags proved to my satisfaction that their design and manufacture was on par with my expectations for any magazine.  They were reliable and I had no difficulties that were in any way attributable to the magazines.  I don’t want you to think that I torture tested these magazines, because I didn't.  I looked through some of the promotional material and a few YouTube sources.  There doesn't appear to be anything earth shattering to indicate poor design or poor materials performance, so I didn't think I could add anything productive by undertaking my own torture tests.

One last thing that I think is important to note is that Hexmag offers a lifetime warranty on these magazines.  I think you must applaud any company that is willing to stand by the products they manufacture.

The only criticism I have about the magazines is one that has absolutely nothing to do with their quality or capabilities.  While I applaud Hexmag’s innovation and creativity, I don’t know why I need the HexID system.  It seems like a solution that was searching for a problem.  In the past I've never felt such a compelling need to differentiate my magazines that I had to seek out a DIY solution for my magazines.  Now don’t get me wrong, I would spend my hard earned money on these magazines.  I just wouldn't spend money on the different colors of follower/latchplate sets.

I still like where Hexmag was going with the design and implementation of the HexID system and to me that says a great deal about Hexmag’s potential and capabilities.  With novel innovations and a willingness to stretch envelopes, I have no doubt Hexmag has the potential to innovate in ways that will attract even more fans.  So in conclusion, I don’t think you can go wrong buying Hexmag HX30-AR magazines.

Firearms Insider Reviews ‑ 8 Key Points

Claim to Fame: Interchangeable follower/latchplate system: HexID Color Identification System

Target Market: Owners of AR-15 rifles that can use STANAG magazines.

FNBs (Features & Benefits of this product):

  • Impact Resistant Fiber-reinforced Nylon Polymer Construction
  • Raised Hexagon Pattern for Improved Manipulation
  • Tool-free Latchplate Design for Quick Disassembly
  • HexID Color Identification System
  • Lifetime Warranty
  • Made in the USA!

What other aesthetic options or finishes are available?: Color coded magazines using HexID

What others are saying?: "In sum, my impression of the HX30-AR magazine was a very positive one. While I wouldn’t suggest PMag owners selling off their stock and buying a pile of new HX30-ARs, I think I might choose the HX30-AR over the Gen M2 Pmag if I were looking to buy new magazines." ‑ Nathaniel F, The Firearms Blog

Price point:

I need it now! Availability:  The HexMag Magazine is available right now at Apex Gun Parts

Our Rating:

+-Reliable +-Reasonably Priced +-Sturdy Construction +-Good Materials +-Lifetime Warranty 

- HexID just doesn’t seem like a compelling feature

Score: 7.575

 

 

Reed's Links:

AR_banner

 

CCOP USA 1-6X30 Tactical Rifle Scope with Illuminated Reticle Review

1624i_1Allow me to let you into a little industry insider secret. Everyone walking the SHOT show has a shopping list.  It doesn't matter if you are from the media, a retailer, manufacturer, owner or representative, we all walk around the grounds of SHOT with an item in mind we want to checkout/try/asses for the purposes of buying it later.  I’m no different, one of my top items in mind while I was wondering the endless halls of the 2014 SHOT show was a variance 1-4X or 1-6X tactical scope for my favorite AR15.  Don’t get me wrong. ACOGs are great and so are EOTechs but they are very specialized and wonderfully engineered tools that will execute the task they were built for flawlessly while burning a very big hole in your pocket… I was on a task to find a good quality glass that will give me both the CQB red-dot reflex sight capabilities but will also give me some magnification capabilities for the 75-200 yard range where a red dot sight starts to be more of a guess and less of a precision tool.  I could, I suppose, go for an EOTech with a magnifier, but there are 2 things I didn’t like about this combo: first, the logistics of mounting/un-mounting and the need to carry the magnifier somewhere while it’s not mounted was a little too annoying for me. Second was the painful $1000 price tag (on the low end!)  All of the above made the variance scopes very popular recently with the tactical shooting community, particularly the AR15 and AK47 owners.

So, I’ve set a goal to find something good for a sub $300 budget.  Now don’t get me wrong, I checked, felt and drooled over ALL the optics in the 1-4X/1-6X categories. I’ve been to every optics vendor from Sun Optics to NightForce. I checked the offering from Vortex, US Optics, Leupold, and many other vendors I can’t remember their names (so, so many…)  After 3 loooooonnnnnggg days of wondering the grounds, in a dark corner of the basement level, I ran into a small booth of a company called CCOP-USA. A new(ish) Chinese manufacturer that I haven’t seen before that offers all kinds of optics and optics accessories. Tired and disappointed that I couldn't find what I was looking for, I had no big expectations for their product and figured they’d be low quality as most of the other no-name eastern manufacturers I saw so far.

1624i_6Boy was I wrong. First, they had both 1-4x AND 1-6X options. The first thing you notice when you look through the glass is how clear it is and how much light goes through it. This is probably due to the 30mm tube (most other 1-4X optics have a 24mm tube which let less light through.The Illuminated reticle and the big diameter make it feel like a red-dot reflex sight. Having the reticle backed by the black reticle and lines guarantee that even if the battery runs out you can still use the optics (point down for EOTech on this one).  One huge compliment for these guys is that their 1X is the closest 1X I’ve seen in any of these 1-4X/1-6X optics. Including some of the expensive brands!

1624i_3A twist of the ring and you get up to 6X magnification. Considering most “budget” scopes are 3-9X this covers a very good distance.  So, getting one is a little slow (about 7-10 days to get it) but when I got it, I couldn't wait to mount it and head to the range.

I had it mounted on my PS90 with a one piece scope mount that also positioned the optics high enough at my eyes level.

1624i_2

Zeroing was real easy thanks to the “clicks” adjustment mechanism on the scope (which usually only exist on the more expensive scopes).1624i_4

I had it zero at 25 yards and then switched to 50 yards, 75 yards and 100 yards. I had no problem staying on target and hitting every time.  SO, to the question you’re probably asking yourself by now, what’s the cost?  Well, this is one of the coolest thing about this scope. MSRP is only $310 and you can find retail in the $190-$250 range.  I gave this product a score of 8.0.  The only reason I didn’t score it higher is because I don’t have it long enough to testify to its long term usage durability but I promise I’ll have a follow up review in a few months.

I guess SHOT was successful after all…

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Best Bang for your buck in the variance range tactical scopes

Target Market: Tactical shooters / AR15 and AK47 owners that look for a budget aware alternative

FNBs (Features & Benefits of this product):

  • Model: SCP-1624i
  • Magnification: 1X-6X
  • Tube Diameter: 30mm
  • Objective Diameter: 24mm
  • Field of view @100yards: 115-19.2ft
  • Eye Relief: 4.5"-4"  
  • Exit Pupil: 10-4mm  
  • Click Value: 1/2"  
  • Length: 265mm  
  • Weight: 508g
  • Reticle: CQB
  • Illumination: Red / Green
  • W/E: ≥40'  

What other aesthetic options or finishes are available?: Comes with a soft elastic scope cover

What others are saying?: Their eBay store has over 3700 reviews with a positive percentage of 99.7%

Price Point:

MSRP = $310 Retail = $225

I need it now! Availability: CCOP USA 1-6X30 Tactical Rifle Scope is available here.

Our Rating:

+ Easy on the budget + A twofer: you get a CQB sight and a 6X scope in one package + Zero adjustment is easy with no tools required + Shock proof + Water proof + Fog proof + Illuminated reticle + Black reticle marking to backup in case of dead battery

- New/unfamiliar manufacturer with no history or long term reviews. - Shipping could take up to 10-15 business days

Score: 8.0 Great80

 

 

Joseph's Featured Link:

Big D Armory

BigDArmory

Blade-Tech Revolution AR-15/M4 Double Mag Tek-Lok

BTAR.jpg

BTAR2Everyone owns their firearms and related accessories for their own reasons and to me my firearms and related accessories are an addicting and expensive hobby that possess additional utility that I hope to never need to use. Im talking about defensive applications. I think spending thousands of dollars on plate carriers/chest rigs, 30 magazines, and every tactical doo-dad is not money well spent. Much rather BTARapply that to ammo to train with. Therefore I approach that very distant secondary purpose of defense with a minimalistic outlook on my gear. So instead of a big 6 magazine chest rig with crossdraw holster plastered on it I resort on a basic rig consisting of an Uncle Mikes Instructors Belt, Blackhawk CQC Holster and double mag pouches. I realized that I was neglecting training in or having the ability to carry AR magazines, this caused me to search for a means of doing so. Having experience with some of Blade-Techs other products I didn’t hesitate when I came across this product on Amazon. I enjoy the fact that this product does not take up precious horizontal real estate allowing me to have space for other things. This product is not for everyone but if it appeals to you its fantastic.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: High Quality holsters and accessories. 

Target Market: 3 Gunners or other competition shooters.

FNBs (Features & Benefits of this product):

  • Proprietary polymer blend
  • Wont warp under extreme heat (300 degrees)
  • Does not become brittle during extreme cold
  • Adjustable retention screws for personal preference

Key Benefits:

  • The main benefit of this design is the saving of belt space by stacking the carriers out versus taking up horizontal real estate on your rig.

What other aesthetic options or finishes are available?: So this product also comes in a single pouch but the great variety comes from the attachment variations possible through Blade-Tech’s shop. You can get anything from a 3” duty loop to MOLLE as the attachment style so these carriers can really fit into anyone loadout.

What others are saying?: From what I gather from the product page on amazon most everyone likes this product giving it a 4 or 5 star rating. Only negative comments were due to ergonomics possibly caused by other gear deficiencies. Amazon Product Page Review

Price point:

I need it now! Availability: Blade-Tech products can be found in local stores, but for the best selection online retailers such as Amazon, Brownells, or Blade-Tech’s own site are going to be your best options for finding what you want.

Our Rating:

+-Fantastic retention +-Compatible with polymer magazines +-Durable +-Fast and easy attaching and detaching from rig

--Tek-Lok system has too much wiggle room when used with certain width belts

Score: 8.5 Great85

 

 

Featured FFL:  I recommend Dynamic Combat Solutions of Wayne, NJ for my firearms needs including full FFL, gunsmithing, and customization services. Dynamic Combat Solutions

My Links:

 

Hornady Lock-N-Load O.A.L. Gauge & Bullet Comparator Kit Review

Hornady LNL OAL Gauge & Bullet Comparator One of the most addicting aspects of reloading ammunition is the specialized tools that are so readily available today that improve the process and help squeeze every bit of accuracy out of your firearms. Two products that I recently invested in are the Hornady Lock-N-Load OAL Gauge & Bullet Comparator Kit (you'll also need to pickup a modified case - usually will be displayed right next to these products on the shelf. These three tools used together help determine how a specific bullet best fits into your chamber by its Ogive (pronounced o-jive). The Ogive of the bullet is the plane that lies between the straight wall and the rounding taper. Each bullet differs in greatly in base to tip dimensions, between each manufacturers unique "style," the bullet type, and the grain/size. In fact it's common for variations of up to .025" to exist from one bullet to the next. However the Ogive is what engages with the barrel's rifling lands, and gives the reloader a more consistent standard of measurement.

Basing your seated bullets off the O.A.L. (Overall Length, from case head to bullet tip) is standard stuff, and while it will help keep you within SAAMI specs and inline with factory ammo, you could be missing out greatly in terms of accuracy and performance. Measuring off the Ogive will give you a more customized relationship between your desired bullet and your specific rifle's chamber. The best metaphor I can think of is imagine if you could customize the tread on your car's tires so specifically to your vehicle and the road surface so that it gave you an extra 3-5 miles per gallon. While seating depth won't effect velocity, a bullet seated to a precise length relative to YOUR rifle's barrel will noticeably improve performance.

*Note: you will also need to keep in mind your magazine length limitations.  If the O.A.L. of your cartridge after fine tuning using this process is greater than the wall of the box magazine or bottom metal, then you will have to single load each round into the rifle.

The O.A.L length gauge and modified case let you set up a bullet in a case with maximum overall length between your closed boltface and the barrel's lands. You may be asking, how the heck do I measure the length to the Ogive instead of the bullet tip?  Well, thats where the Bullet Comparator comes in.  It is an adapter that easily attaches to the blade of your caliper. It comes with interchangeable inserts for bullet diameters including .224" (5.56mm), .243" (6mm), .257", .277", .284" (7mm), .308" (7.62&8mm). When installed on a rezeroed caliper, it lets you measure a cartridge from casehead to bullet Ogive. That's the shorthand version. For those who aren't passed out on their keyboards or off surfing YouTube, I'll explain the whole process a bit more thoroughly. If you grasp the concept, you can skip to my review key points.

Hornady LNL OAL Gauge & Bullet Comparator

First you take your modified case and thread it onto the O.A.L gauge, then lightly push your desired bullet into the case to the point where it's seated deeper than normally. For example, I'll thread on a .308 win modified case and then insert a Sierra 168gr MatchKing bullet. Just don't push it too far were it falls into the case or else you'll have to push it out or fish it out. Next, remove the bolt from your rifle (or use the curved gauge if your rifle's bolt does not come off)  insert the O.A.L. gauge through the action (slowly) and into the chamber. You don't want to jam it with too much force that you unknowingly alter the modified case. When its gently snug, you then push the plastic inner rod of the gauge forward, which will push the bullet forward in the case and if you're sensitive enough you will feel the bullet engage the lands of your barrel's rifling. You can then tighten the thumb knob and lock that inner rod, and pull the gauge out of the action.  Again, if you use too much pressure you may lodge the bullet in the lands and will not come out with the gauge, and you'l have to start over.

So now you have your gauge with the modified case and bullet still in position, and then get out your caliper with the comparator and proper insert installed. You will have to rezero the caliper closed on the comparator first. With both tools in each hand, insert the bullet tip into the comparator, and adjust the caliper to measure off the case head as usual. Now instead of a reading for overall cartridge length from casehead to tip, you will have the exact distance between casehead and your bullets Ogive (exactly 0.00" using my .308 win and the SMK 168gr) Now's were the fine tuning comes it. That dimension tells me when my bolt in closed, the shallowest I can seat that specific bullet where it will be into the lands of the rifling. You will want to back off of this some, between 0.015" and 0.02" typically to start but every rifle/bullet combo will have a sweet spot. It's up to you to determine whether your rifle's barrel prefers that specific bullet closer or farther from the lands.

While this may seem like splitting hairs to some, the accuracy difference can be up to 0.5-1 MOA.  At longer ranges, using the Hornady Lock-N-Load OAL Gauge & Bullet Comparator Kit can be the difference between a fantastic group in one singular hole, or just a decent 1 MOA group. Based on my results, I find I will almost never buy a box of factory ammunition, as long as I have the brass and components I am able to make cheaper and more accurate rounds.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Measuring cartridge lengths across bullet tips is not a reliable or repeatable method for measuring your reloaded rounds. The O.A.L Gauge and Bullet Comparator solve that problem by measuring rounds from a reliable surface on the bullet, the ogive, to provide consistent, precise measurements of your rounds and improved accuracy.

Target Market: Reloaders both Novice and Experienced

FNBs (Features & Benefits of this product):

What other aesthetic options or finishes are available?: The O.A.L Gauge comes in either straight or curved orientation to best work with your rifle's action.

What others are saying?: “I decided to order this comparator when I purchased my Remington 700 SPS Tactical (.308). When I bought this rifle, I wanted to take my reloading a step further and dive into the world of precision hand loads. Up to this point, I was reloading rounds mostly for target practice and a few for hunting every year. So the reloading gear I own was sufficient enough to get the job done, but not for higher quality hand loads. But as I began realizing how challenging precision hand loading can be, I knew that I would have to reach out and get some reloading equipment that could help me get the job done.

Due to the fact that I had no experience with the tools needed for this type of work, I simply called into Sinclair International and spoke with one of their many highly experienced reloading techs. He couldn't have been more helpful in explaining about important tools, explaining how and why they worked. As you may have guessed, he suggested this comparator as an essential tool for the entire process." Brownells Review Price Point:

Bullet Comparator

O.A.L. Gauge

I need it now! Availability: Brownell's

Our Rating:

  • Comparator is offered in different price points per how many different inserts/calibers you need, the basic 6 insert kit covers the common calibers
  • The OAL Gauge is easy to operate and the thumb knobs are well crafted

  • Each modified case needed is expensive!

Score: 8.5 Great

 

Smith and Wesson M&P 15 MOE Midlength Review

m&P By Bradley Johnson

The black rifle. Most non-shooters recoil at the sight, or very mention of it. In fact, reading reviews of local shooting ranges has lead me to believe that many people think they are out right illegal. Of course (and fortunately for me) that is not the case.

I was born and raised in California. This puts me at a disadvantage among the shooting community. However, I was determined to throw my hat into the ring.

If black rifles are illegal, then someone forgot to tell RifleGear; my local shop; they carry everything the modern sportsman could want. I entered with the intent to purchase an entry level rifle. I've shot in the past, but this would be my first "black rifle". Apparently, I was not alone in my endeavor, because the line was literally out the door!

After handling several rifles (Spikes, Daniel Defense, etc), I left with an M&P 15 MOE Midlength... well, if only it were that easy. 10 days later...

After a strip down, inspection, and cleaning I was sure that my day at the range would be a good one. My first impression of the rifle was sheer elation! It was accurate straight out of the box, and it felt great in my hands. Everything functioned perfectly, and the Magpul add-ons were light, and handled well (surprise, surprise). I thought it was odd that the magazine was a 30/10 (30 round mag modified to only accept 10 rounds), instead of a 10 round mag, but I guess Smith & Wesson leaves the "California Compliant" part up to the dealer. The "Art of the Carbine" DVDs included with the rifle were really informative. Not only do they cover tactics, but also breakdown, cleaning, malfunctions, etc.

My wife felt the same way, and since I'm not much to look at, I've included a video of her firing it at the range.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Reliability. I've put one thousand rounds through this rifle without a single hiccup. Smith & Wesson definitely delivered a product worthy of their legacy. The MOE furniture only adds to the overall experience.

Target Market: This is a solid rifle. Magpul is a leader in firearms accessories, and for good reason. Everything about this rifle feels right!

FNBs (Features & Benefits of this product):

  • Magpul!
  • Magpul adjustable stock, pistol grip, hand guard, folding m-bus backup sight, and vertical grip. The magwell is also flared for easy insertion of mags, and the Magpul logo is stamped on the lower receiver.
  • M4 A2 front post sight
  • "The Art of the Carbine" DVD set. The DVDs cover tactics/range practice routines, cleaning, breakdown, malfunctions, etc. In other words, everything that the Smith & Wesson manual fails to mention.

What other aesthetic options or finishes are available?: The Smith and Wesson M&P 15 MOE Midlength is available in black and flat dark earth.

What others are saying?: “Testing of the M&P-15 MOE Mid began with rapid-fire drills using a randomly loaded assortment of .223 Rem. ammunition—ranging from lightweight, varmint-type offerings to those appropriate for high-power competition at Camp Perry—and not once did the rifle experience a malfunction. Although this illustrated the rifle’s ability to digest a wide range of ammunition types, it doesn’t reveal its accuracy potential. As such, we mounted a Nikon 3-12x40 mm M-223 riflescope in the company’s two-piece P-series rings, then shot five consecutive, five-shot groups at 100 yards with three ammunition types. The rifle clearly preferred PMC’s Precision 75-grain BTHP load, averaging 1.43 inches for 25 shots, and the single best group measuring slightly more than an inch. More economical loads produced respectable groups, too.

With the M&P-15 MOE Mid, S&W offers shooters an AR that, right out of the box, is well-suited to handling a range of tasks, from protection and competition to hunting. As such, it would make an excellent choice for those desiring an AR-style rifle, be it their first or simply an upgrade.” - American Rifleman

Price Point:

I need it now! Availability: This rifle is available from many retailers, including Bud's Gun Shop and Cheaper than Dirt.

Our Rating: + Magpul furniture + Iron sights + 1 in 8 twist

Score: 8.5 Great85

 

DPMS G2 Recon .308 Rifle Review

1888571_1430869157156551_1319482367_n By Steven Pope

After looking at several of the rifles on the market, I settled on the G2 Recon. Price was right and the options were good. And besides, somebody has to buy a first year model so the rest of you can find out if they are worth it.

I bought my rifle online, sight unseen, first time buying a gun of any kind online. So leaps of faith on two fronts here. No one near me had one, let alone knew that a new version was out, so it was purchased sight unseen.

I was pretty excited about it and could not wait to get it, and so far I am very happy with my purchase. I was/am a little leery about all the new design changes, but like I said, someone has to be the first so I gambled.

When I pulled it out of the box to do the pre-transfer inspection, I was quite pleased with the fit and finish. The lines were good, no gaps, everything fit nice and tight, like I would expect. The finish was flawless, basically it looked like I would expect a 1,400 dollar rifle to look.

After paying my $20.00 transfer fee, I took it home and proceeded to put three rounds through it because the sun was setting and I just could not help myself, I was so excited about finally having it. Then I went inside and did a field strip and clean. Again, nothing that I would not expect. Everything seemed to look good, fit good and function good.

The only issue that I have noticed is how the Nikon M-223 mount fits, either the mount is a little out of spec or my top rail is, as its on as far as my gun smith could get it without putting some real effort into it. As it turns out, its location is about where it needs to be, so I have not taken the time to look into it.

I purchased a few P-mags before the rifle showed up, and got them loaded up and ready to go. And so far, they have performed perfectly with no flaws at all. I have also emptied the factory magazine a few times and it, too, has been flawless.

This last Saturday I had about 45-min to an hour to go sight it in, so I took it out at last light and sighted in. Before I knew it, I had put a total of 50 rounds through this thing and they all functioned perfectly, no malfunctions of any kind.

All shots were made from a bi-pod under the front and a sand bag under the rear.

I was shooting hand loads that I developed for my 308 bolt rifle I use for hunting. The round is a 165 grain Speer BTSP over 43 grains of IMR 4064. In my bolt gun this combo gives me clover leafs at a 100 yards with a fully supported rifle. In the G2 we were close, but my shooting position is horrible, I am really hunched over the table. And that position really messes with how a short fat guy breathes, but it was good enough that I think I could come real close to duplicating those clover leaves, if I could get a good shooting bench set up. I seated the bullet to magazine length. I had zero feed issues, everything functioned perfectly.

After I got the scope sighted, I started plinking. I was having so much fun I did not realize that I had burned through all the ammo I had, I have never shot more than a box of 308 in one sitting so to go through 47 was a lot, but it was incredibly fun.

The recoil was very pleasant and easy to handle, which is good since one of the roles I hope this rifle will be able to fill is a hunting rifle for my son when he is old enough to hunt. The trigger is good, for me any way. I do not anticipate upgrading it.

On several forums, many people suggested that I skip the 16" barreled guns and go no less than 18", due to noise and muzzle flash. So I was kinda worried about the noise and flash when I was shooting the other evening. But, to be honest, I think my M&P Sport has more noise and flash than this does. I did not start shooting ‘til the sun was behind the closest mountain, making it optimal conditions for seeing muzzle flash.

After sighting in, I decided it was time to just do some plinking. I was surrounded by black volcanic rocks with lots of white stuff on them (no idea what the white stuff is) which made them perfect targets for the conditions. Let’s just say that if they had been deer or elk, I would have had a lot of explaining to do if Fish and Game would have caught me. There is just something cool about the sound of a bullet smacking a rock at 200-300 yards. Plus, for a guy like me, it feels good to have the audible feedback letting me know I really did hit the rock.

Overall, I think this is a well put together rifle that, so far, shoots very well.  Since sighting in, I am over 100 rounds and zero malfunctions.  The rifle is pleasant to shoot and just plain fun.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: DPMS claims that the rifle is lighter than previous versions. From what I have handled in the local gun shops that seems to be very accurate. This gun is light and easy to handle. Another point DPMS makes in advertising this rifle is the nice neat pile of brass that it makes while ejecting a spent case. I have found this statement to be understated somewhat.  While doing load development I discovered that the loads the rifle likes best seem to land in a circle less than a foot in diameter. For a reloader, this is a pretty good bonus.

Target Market: This rifle would be well suited for several applications, including hunting, 3 gun competitions and law enforcement/security.

FNBs (Features & Benefits of this product):

  • One of the major advertising points of this rifle is the compatibility with AR-15 parts from the mag-well back, fire controls and buffer tube.

What other aesthetic options or finishes are available?: The DPMS G2 Recon .308 Rifle is only available in black.

What others are saying?: “I'm surprised this hasn't been the talk of the semi-auto forum...i expect the snubs at M4carbine and lightfighter forums to pretend the earth hasn't shifted, but not here...

As much as i hate to parrot company line, I think DPMS has changed the game.

If the new GII rifles live up to DPMS's hype, and they aren't known for failures or quality issues, I believe DPMS will cause the market to change.

Even if there are teething problems, the 308 AR market will eventually follow DPMS's lead after some resistance and consternation of course.

I have two DPMS rifles...looks like I'll be adding one of these to my stable. I'm especially interested in the 20" hunter model...although it should have been designed with a threaded barrel.” - TX_Flyboy, Snipers Hide

Price Point:

I need it now! Availability: You can purchase this rifle from many retailers, including Bud's Gun Shop and Cheaper Than Dirt.

Our Rating:

+ Light + Good fit and finish

- New gun, Untested

Score: 9.5 AmazingAmazing

Windham Weaponry MPC A4 Rifle Review

windham1 By Beau Summers

Well I'm pretty sure everyone knows that Windham Weaponry was started by ex-Bushmaster employees. So with that being said, I'm going to tell you a couple of key points of me choosing this rifle. Number one this rifle is 100 percent made in the USA! That is awesome! I take pride in owning a quality American made product! I bought this rifle from Cabelas because it was exclusive and comes with a sweet American flag engraved on the side. Cabelas had two choices the SRC flat top or the MPC with A2 front post and flip-up Diamondhead rear site. The MPC model with flip up Diamondhead sight was only 50 more bucks. I went for that one because those sights alone are over 100 bucks. Good deal! I also got a 50 dollar gift card with my purchase! This leads me to another reason I bought this gun. I don't have a fat wallet to go buy any gun I want. This gun came in at a very decent price at 799.99 including gift card and sale! This gun, although affordable, isn't cheaply made! The gun is solid and the upper and lower fit like a glove! The finish seems to be really durable. It has a staked gas key. It has a chrome lined barrel so cleaning has been a breeze. It comes in a pretty nice case, though I've since bought I nicer one to protect my investment. Comes with one magazine, kind of cheesy sling that I haven't used, and a support our troops magnet.  It also comes with a lifetime limited warranty that is transferable. The warranty goes where the gun goes! Also when I bought the gun 10 dollars of the money went to wounded vets who bravely served this country. This is my very first AR. I did a lot of research and video watching before I chose this company. I’ve had no issues with it to date. I've fired 260 rounds through it thus far and 160 rounds of it was cheap Russian ammo which it chewed up nicely! I love my Windham rifle don't over look the good price,  just because it cost more doesn't mean it’s better! Check out these great rifles!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: This product is made in the USA! Windham Weaponry supports our troops and wounded warriors! They guaranty their product 100 percent! The American flag on the side of my rifle is awesome! You truly feel patriotic when you own this weapon!

Target Market: The rifle I have probably the everyday shooter, home defender. Although Windham has many other rifles to fill any need!

FNBs (Features & Benefits of this product):

  • Warranty
  • Diamondhead sights
  • Affordable
  • Quality

What other aesthetic options or finishes are available?: The Windham Waponry MPC A4 Rifle is available in few different camos, muddy girl, smowfall timber and a woodstock series

What others are saying?: “The Windham Weaponry AR I have, is one of the best built ARs I've ever run across - bar none! And, I will tell you that this is probably the most accurate AR I've ever shot, and it is also the most consistently accurate AR I've shot with all the various ammo I tested in it - and I tested a lot of rounds in a month through this baby.” – Pat, Survival Blog

“I've said nothing about the current Bushmaster, I've only commented on Windham. I agree that Windham is the better rifle and I support them 100%. The quality of their rifles is BETTER than the original Bushmasters I've owned. They aren't simply Bushmaster under a new name, they are better than the old Bushmaster and I think many at Windham would agree.” - Military Arms Channel

Price Point:

I need it now! Availability: You can purchase this rifle from many retailers, including Bud's Gun Shop and Cabelas.

Our Rating:

+ Great Quality + Great Price + Great Warranty

- Bad sling - One mag

Score: 8.0 Great80  

Henry Classic Lever Action .22

Henry 1 The Henry Repeater is one of the great American firearms. The original not only had an impact in the civil war but also gave the platform to which Winchester improved upon. Winchester continued on to create some of the best lever actions in the world. It all started with the original Henry design. Granted, that the little .22 plinker being reviewed here is a far cry from the original Henry repeater, it still feels nostalgic in a sense when shooting it. Shooting a lever action is just plain fun, and when you think about the fact that your shooting the firearms equivalent of the great great great grandchild of the it makes it all the much better. That being said this is a budget friendly gun that is built to a high standard of reliability and accuracy but is by no means a work of art or an engineering masterpiece.

 Firearms Insider Reviews - 8 Key Points

Claim to Fame:  Classic Henry lever action .22 style and performance in an affordable easy to shoot package.

Target Market:  Any and all shooters and can be particularly effective as a training firearm for new shooters.

FNBs:

Key Features

  • State of the art multiple groove rifling for improved accuracy.
  • Tubular magazine that can hold 15 rounds of .22lr, 17 rounds of .22 long, and 21 rounds of .22 short
  • Ambidextroushenry2
  • American walnut stock

Key Benefits

  • Value
  • Ammo flexibility

What other aesthetic options or finishes are available?:  In there line of Classic Lever action .22 rifles you can get a carbine length version as well as a youth sized rifle. The rifle length model also comes in a “Frontier” model with an octagonal barrel.    Henry

What others are saying?:

Price Point:

I need it now! Availability:  These rifles are very common and can be found at most any gun shop.

Our Rating:

+ Style + Fit and Finish + Fun + Accuracy + Cool Factor

- Not “Big Guy” Friendly

Score: 8.0 Great80

MY Blog: NJ Gun Blog

Crosman MAR177 PCP AR-15 Upper Receiver Conversion Kit

MAR177-PCP.jpg

Crosman MAR177 PCP

Have you ever considered a conversion kit for your AR-15 platform rifle or carbine? Perhaps a 22LR kit that snaps onto your lower receiver and allows you to shoot the economical 22 Rimfire. How about a conversion kit that shoots an even more economical round and keeps your guns clean?

Let me preface this with telling you that I am NOT the target market for this conversion kit.  This product is designed for the precision rifle competition shooter, so from my point of view the price point was a real shocker at first. However, I do see value in more than just a competition setting. This could be a really good training option for any AR-15 shooter. I would compare it to a 22LR conversion in some ways. Yes, it’s more expensive, but the ammo is way cheaper than even 22LR. You can purchase 1,250 (177) caliber pellets for about $14. So over time you may break even with a 22LR conversion kit. One of the big benefits of an air rifle upper is that they are very CLEAN, you will rarely, if ever, have to clean this. Not something you can say about 22LR conversion kits.  My one big issue is that fact that you have to manually charge the action every time you take a shot. I’m sure this is not an issue for the intended users since they mostly shoot bolt guns in small bore competitions. Overall I'm very pleased with this conversion kit, it leaves a smile on my face each time I shoot it.  Whether you're training for 10-meter rifle matches, plinking cans or shooting apples, I would recommend taking a serious look at the Crosman MAR177.

Claim to Fame: The MAR177 conversion kit replaces your existing AR-15 upper receiver and converts it into a PCP(Pre Charged Pneumatic) .177 caliber competition air rifle.  Designed to support 10 meter match air rifle competition.

Target Market: The MAR177 is built for National Match Air Rifle competition shooters

Features & Benefits

Key Features

  • Match grade accuracy
  • Ready for competition out of the box
  • Meets the National Match Air Rifle competition requirements
  • More range time - even indoors
  • Low noise and minimal recoil
  • Up to 120 shots per fill

Key BenefitsCrosman MAR177 PCP Pop Cans

  • Practice with your competition AR-15 Trigger Group
  • Use the same lower, stock and pistol grip of your AR-15 Rifle
  • It’s possible to put an optic on the rifle
  • Very accurate
  • Affordable clips $14.99

What other aesthetic options or finishes are available? Only Black

What others are saying?

  1. Review by Jim on Crosman’s product page - “I sold off one of my NM uppers to buy this air rifle conversion so I could train in the off season. The cost was a little high but well worth it. I pinned the rear sight and now it works a lot better. The winters are not going to be as boring as they used to be. Thanks for a really good item.”

  2. Review by “The Truth about Guns”

Price point (MSRP versus actual retail)MAR177 PCP 177 Clip

MSRP = $650.00 from the Crosman Corporation

Retail = $600.00 on Pyramyd Air Gun Mall

I need it now! Availability In stock at the above places as well as: Amazon.com for currently $600

Our Rating If the price point was a few hundred dollars less I would give this 9 stars out of 10 since it would open it up to the 22LR conversion market with comparable price points.

+ Rifled Lother Walther steel barrel + Good alternative to a 22LR conversion kit + Fun to shoot + Very accurate for even a rifle noob like myself + Velocity up to 600 fps + Built in pressure gage

- Very heavy and bulky - Must be charged from a scuba tank or a VERY high pressure hand pump (1,000 to 2,900 psi) - Expensive

75

Score (7.5)

Featured FFL

ZZ Cops Gun Room

ZZ Cops Gun Room

 

 

 

 

 

Jake’s links:

Gun Guy Radio Lindenmayer Photography