adjustable

Bergara B-14 Ridge SP

Bergara B-14 Ridge SP

Review

  Years ago I had a 308 varmint rifle that weighed a ton. I even took it deer hunting. So since then I have been looking for something shorter, and lighter, that still has the accuracy I got out of the varmint rifle. Bergara had exactly what I was looking for in their Ridge line of rifles. That rifle is the Ridge SP in 308 winchester.

  The Ridge SP is a shorter version of Bergara's standard Ridge line. The SP stands for “special purpose”. I think they intended this rifle for police snipers, but I can’t be sure. Really, the special purpose could be mid range hunting, or just someone wanting a bolt action performance rifle that doesn't weigh a ton. The only real difference between the .308 Ridge and the .308 Ridge SP, is that the SP has an 18 inch barrel instead of the standard 20 inch. 

  When you first look at the Ridge SP, it looks like most “hunting” style rifles. It has the normal looking American style stock with a hinged floor plate. The stock is a black polymer style with grey speckles. Bergara finished the stock in some sort of a semi-grippy coating. It is not smooth, but not sticky either. It gives a really good balance of grip if your hands are wet or muddy. It also has some diamond texture on the pistol grip and forend. There is also a nice soft buttpad. The buttpad probably helps more on the larger calibers, but it is really nice on the 308. To round out the stock, it has front and rear sling swivel studs and free floats the barrel. 

  Bergara is known for their barrels. Their barrels produce some good accuracy. They even have an accuracy guarantee. It is “Sub MOA at 100 yds with 3 shot groups of available factory match grade ammunition”. They recommend a few loads in 308 that should work. Those are: 168 gr Federal Gold Medal Match, 175 gr. Federal Gold Medal Match, Berger 175 gr OTM. I didn’t have any of these on hand, so I used some Norma 175 gr Golden Target and some 168 gr reloads I had made up. I was able to get 3 shot groups under 1 MOA fairly easily with the Ridge SP. I even have some 5 shot groups that measure under 1 MOA. All my accuracy testing was done at 100 yards. The barrels on the Ridge line are also threaded in the standard threads for whatever caliber they are chambered in. This gives the ability to put on any type of muzzle device, including suppressors. As a FYI, I broke in the barrel following the procedure in the rifles manual.

  The action on the Ridge SP is fantastic. It is super smooth to operate. For being a factory, mass produced rifle, I don't think you will find a smoother action, especially in the under $1000 price range that the Ridge SP falls into. Now that that is said, the action also feeds extremely nice out of the 4 round internal magazine. The large textured bolt handle tends to give you a good feel for what you are doing. It is also large enough to help with fast follow up shots. Something I couldn’t say about that varmint rifle I had.

  On top of the Ridge SP’s action is a 20 MOA picatinny scope rail. I believe this is because it is the SP line and Bergara doesn’t mention that it comes with one. If you want to change the rail or put normal scope mounts on the Ridge SP, it uses standard Remington 700 bases. I mounted a 4-16 Lucid on it when I first received the SP. Shortly after that I received a SightMark Presidio 5-30x56 and installed it. Yes, it is overkill for a rifle of this type, but I like it. One of my only complaints, with the scope rail, is that it gets in the way of loading the internal magazine. 

  The Bergara Ridge comes with an adjustable trigger. For a “hunting” style rifle, the trigger is fantastic. It’s a typical Remington style 700 trigger and can be replaced with any of the aftermarket triggers for that style of rifle. The trigger is a single stage, curved, and has zero take up, a short crisp break, and a little bit of over travel. I really like this trigger. The Ridge’s trigger is also adjustable for pull weight, from around 2 pounds up to 5 pounds. This one came from the factory at 3 pounds. I adjusted it down to about 2-¼ pounds and it works really good for me. If I were carrying it around in the brush, I personally would probably adjust it to 3-½ pounds or more. An aftermarket trigger, with the same pull range, would be hard pressed to be better.

  I have been really liking the Ridge SP. Granted I am not going to put thousands of rounds through it for a review. But I do have enough different types of ammo through it to know how well it works. I am well past 300 with about half that being some sort of match ammo. The match ammo does shoot better, but the new precision style hunting rounds are pretty good too. Now onto other stuff. I really like the texture of the stock. It is smooth but grippy. I’ve been told it feels weird, but then they shoot the Ridge SP with the stock and forget about it. My biggest complaint about the Ridge SP is the small loading/ejection port. This makes it harder to load the internal magazine. Add in the 20 MOA top rail, and it is even harder to load the magazine. For a hunting rifle this isn’t a deal breaker, but it is annoying. Speaking of that 20 MOA rail, I was thrilled that it came already installed. Even if you are only using the Ridge at 100 yards, a 20 MOA rail just makes sense. Did I mention the barrel is threaded? I did use it with a suppressor. The Ridge SP is a great suppressor host. The shorter barrel makes it so the overall length isn’t terrible with a long suppressor hanging off the end. The Ridge SP is just a great all around rifle.

  If you are in the market for a short, handy rifle, the Bergara Ridge SP would be a great choice. It has great accuracy, is super smooth, and doesn’t weigh a bunch. It really doesn’t matter if you are using it for hunting or anything else, it just works. The Bergara Ridge SP is also reasonably priced for what you get. If you want a quality, shorter barreled hunting rifle, definitely check out the Bergara Ridge Line. Especially the Ridge SP

Firearms Insider Reviews - Key Points

Claim to Fame:

Shorter barreled hunting or precision rifle

Target Market:

Anyone wanting a shorter barreled performance bolt action rifle

Features, Benefits, and Specifications of this product:

  • Caliber: 308 Win

  • Capacity: 4

  • 20 MOA picatinny mount included

  • Stock Material: Synthetic

  • OAL: 37.50"

  • Hand: Right Hand

  • Barrel Finish: Graphite Black Cerakote

  • Barrel Material: 4140 Steel

  • Twist: 1:10"

  • Receiver Material: Stainless Steel

  • Safety: Two-Position

  • Stock Type: American Style

  • Threaded: ⅝-24

  • Barrel Length: 18"

  • Receiver Finish: Graphite Black Cerakote

  • Trigger: Performance adjustable 2-5 lbs

  • Weight: 7.20 lbs

  • Stock Finish: Black / Gray Speckled

What other aesthetic options or finishes are available?

A ton of different calibers in the Ridge line. Only 6.5 Creedmoore and .308 Win in SP line with 18” barrel

What others are saying?:

Jamie P at Sportsmans Warehouse  

Ridge SP

This is a great rifle and accurate! Great everything rifle. I like the 18" barrel. Georgia Woods Hunting mostly some open field 300 yds shooting. Great action and the Ridge SP is very balanced and is comfortable to carry with a sling.

Link to other reviews:

Petersen’s Hunting

Price point:

MSRP = $999.00

Retail = $900

I need it now! Availability:

Primary Arms or Palmetto State Armory

Our Rating:

Pros:

  • Super smooth action

  • Accuracy

  • Uses Rem 700 style action and accessories 

  • Adjustable trigger

  • Good weight

  • 20 MOA picatinny rail came mounted on rifle

  • Threaded barrel

Cons:

  • Ejection port is short (so loading internal magazine is difficult)

Score: 8.50 Great

Lone Wolf Ultimate Adjustable Trigger

  When it comes to Glock triggers, everyone has their opinion. I personally don’t hate them, but I am always looking for a better Glock style trigger. When Lone Wolf Arms contacted me about doing some product reviews, my first thought was “try one of their triggers.” That led me to the Lone Wolf Ultimate Adjustable Trigger. I’ve wanted to try this trigger out for some time due to its adjustability. 

  The Lone Wolf Ultimate Adjustable Trigger is a Glock replacement trigger. It is available for anything except Gen 5’s. I received a black trigger with the trigger bar attached. You can get just the trigger only, if you don’t need another trigger bar. The Ultimate Trigger can also be had in a variety of colors. Because I was looking for a fairly light trigger pull, Lone wolf also sent me some of their other trigger enhancement parts. These included: a connector kit, which includes 3 different 3.5lb connectors and a 6lb trigger spring, their plunger kit, and a lightweight striker kit with a 4lb spring. I installed the trigger and the Lone Wolf 3.5lb target connector.

  As you may have figured out from the name, the Ultimate Adjustable Trigger is adjustable. After installing the trigger into your pistol, you can adjust the pre and over travel of the trigger. This is done to eliminate as much pre and over travel as possible, giving you the shortest trigger pull possible. There are 2 tiny set screws in the trigger itself. These set screws do not come installed. I did install them, with some vibra-tight to keep them from coming loose, and also to be able to re-adjust them later, if needed. Probably one of the coolest things, with the Ultimate Adjustable Trigger, is that you can get to these adjustment screws without taking the trigger out. Just take the slide off and you can get to both of them. Lone Wolf has some decent instructions for adjusting the trigger, so I won’t go over them. You can find them HERE if interested. I was really pleased with how much pre-travel I was able to take out of the trigger. My over-travel wasn’t much anyway, so adjusting it only took out a tiny bit. 

  The Ultimate Adjustable Trigger uses a curved shoe. This curved shoe isn’t just curved, it is also radiused around the face, similar to a factory Glock trigger. The big difference is that the Ultimate Trigger also has a flat between those radiused edges. The Lone Wolf feels better to me. Maybe because it is machined to be smooth? Or, maybe its curve is better shaped? Or maybe its the flat? Either way, it has a really nice feel to it. No, it is not available as a straight trigger option for those who are going to ask. When I went to install the trigger, I also installed a 3.5lb connector. Between the trigger and the connector, the trigger pull weight dropped from 6lb’s to 4.5lb’s. That was with just those 2 parts. The shorter actual pull of the trigger also made it much more pleasant to use. 

  When using the Polymer 80, that I installed the Ultimate Adjustable Trigger in, it just feels better. The trigger was a great improvement over the stock one. I can shoot faster due to the shorter travel. I’m probably more accurate since I’m not fighting a heavy trigger pull. The other parts I installed from Lone Wolf, like the lightweight striker, also help with making the gun even more reliable. I like what Lone Wolf did with their Ultimate Adjustable Trigger, it just works.

  Even though the Lone Wolf Ultimate Adjustable Trigger has been around for a long time, it is definitely worth taking a look at. Especially if you like curved shoe triggers. The adjustments are really what make the trigger so nice. Pair that with a Lone Wolf 3.5lb connector, and you will have a nice Glock style trigger for a reasonable price. If you are in the market for a better Glock trigger, go check out the Ultimate Adjustable Trigger from Lone Wolf Arms.

Firearms Insider Reviews - Key Points

Claim to Fame:

Adjustable Glock Trigger

Target Market:

Those wanting a vastly improved Glock style trigger

Features & Benefits of this product:

  • 6061 Billet Aluminum shoe

  • Smooth, symmetrical shoe with large radiused edges

  • In-gun adjustability for pre and over travel

  • 2 piece design

  • Oversized safety lever

  • Safety lever is flush to the shoe for more comfort

  • 9/40 versions are intended for GEN 3&4 (DOES NOT FIT GEN5)

  • Comes with or without trigger bar

  • Made in USA

What other aesthetic options or finishes are available?

Lots of different colors

What others are saying?:

5 out 5 stars at Lonewolfdist.com   

Vastly improved…..

The feel and function of the trigger shoe is a vast improvement over the OEM. The bar, as received, had two burs at the contact point with the connector. Rough and gritty after install. So a few minutes with ceramic stones and polishing, all is well. Together with the target connector and springs the pull is silky smooth at 3lb 4oz. I did not install the take up and over travel screws. Overall well worth it.

Link to other reviews:

TFB review 

Price point:

MSRP = $77.95

Retail = Same

I need it now! Availability:

Lone Wolf Arms

Our Rating:

Pros:

  • In gun adjustable for pre and over travel (must remove slide)

  • Good trigger shoe shape

  • Lighter pull weight

  • Comes in color options

  • Available for a variety of pistol models

Cons:

  • No flat shoe option

  • Adjustment takes time

Score: 8.00 Great

Favorite Link:  Lone Wolf TimberWolf TWF-C review  

Velocity Adjustable Gas Block

  Velocity Precision is known mainly for their triggers. They have introduced some other items lately, One of those is an adjustable gas block for AR15 rifles. If you are looking to tune a suppressed rifle, or just want less strain on your rifle’s parts, an adjustable gas block just might be what you need.

  An adjustable gas block can be very useful. By allowing the gas system to be adjusted, one can “tune” the rifle. If you run a low mass bolt carrier group (BCG), adjusting the gas down, will smoothen out the recoil impulse, and not beat the crap out of your equipment. Suppressors are notorious for “over” gassing the recoil system. So tuning the gas block, when running suppressed, is also a big plus. Another advantage to an adjustable gas block is being able to tune your rifle or pistol for the specific ammunition you use. As you can see, there are numerous reasons why someone might want an adjustable gas block.

  The Velocity adjustable gas block has many features. It is of the “low profile” design, manufactured from stainless steel, and then black nitride coated. So it should last a lifetime. Velocity also cuts some diamond shapes in the gas block to help lighten it up. The gas block has a 0.750” journal diameter, which is pretty much the industry standard. Though I would like to see a 0.625” one for lightweight builds. The Velocity gas block uses 2 set screws on the bottom to clamp it down tight. Also included is a new gas tube roll pin, which was nice. Since the one that came with the gas tube went flying across my garage. It also comes with the allen wrenches to adjust it.

  Adjustment on the gas block is pretty straight forward. On the front of the gas block, is a brass set screw. The brass screw is used as a lock screw, to keep your adjustment from wandering. Loosen it first before making any adjustment on the adjustment screw. The gas adjustment screw is stainless steel, and located on the left side of the gas block. To adjust the gas flow, turn the SS screw clockwise to decrease the amount of gas being sent to the BCG, and turn it counter clockwise to increase the amount of gas to the BCG. Once you have it adjusted where you want it, tighten the brass screw back down. The SS adjustment screw just blocks off flow by making the gas hole smaller, simple as that. If you are switching between suppressed and un-suppressed, the gas block can get annoying to keep adjusting. But, Velocity coats both screws in hi-temp anti-seize for a lifetime of easy adjustability.

  I installed the Velocity adjustable gas block on a 7.5” AR pistol build. In my opinion, the shorter the barrel, the harsher the gas system is on the BCG. The barrel I used was not dimpled for a set screw style gas block. So I just lined up the Velocity gas block, and tightened those set screws down. The gas block hasn’t loosened up, or moved, on me yet. I did use some medium strength thread locker on the screws. I opened up the adjustment screw, all the way, at first. The pistol ran fine on an assortment of ammunition. I then proceeded to adjust it in, 1 turn at a time, until it started malfunctioning with the lightest loads that I regularly shoot. Then I backed it out ½ turn and locked it down with the brass screw. I get a much softer recoil impulse now that the gas system is adjusted for the AR pistol. It really did make for a much nicer shooting pistol. The only problem I ran into, was that the allen wrench provided was to short to tighten the lock screw, at least with my chosen handguard. This is not a Velocity Precision problem, it’s a handguard problem. So check your handguard to see if it blocks the adjustment screw. 

  The Velocity adjustable gas block can be useful. If you need some gas system adjustment, but won’t be adjusting it a lot, this might be exactly what you are looking for. The gas block is well made, fairly light, and won’t break the bank. Go take a look at Velocity Precision, gas blocks aren’t the only thing they make!

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

0.750 sized adjustable gas block for AR15 type rifles

Target Market:

Builders, Suppressor users, competition shooters

FNBs (Features & Benefits of this product):

  • 0.750” journal diameter

  • 1.7 ounces

  • 303 Stainless Steel

  • Black Nitride coating

  • SS adjustment screw

  • Brass lock screw

  • Set Screw installation

  • Includes adjustment wrenches

What other aesthetic options or finishes are available?

None

What others are saying?:

Jon B. 5/5 stars at Velocity Precision

Can’t believe the quality of this gas block for the price. Fits great..installs easy…easy to adjust. What more could you ask for?!?!?

Link to other reviews:

None found

Price point:

MSRP = $59.95

Retail = Same

I need it now! Availability:

Velocity Precision

Our Rating:

Pros:

  • Lightweight

  • SS adjustment screw

  • Brass lock screw

  • Nitride coating

Cons:

  • Only Available for 0.750” barrel journals

  • Handguard can get in the way of adjustment

Score:  7.50 Good

75.jpg

Favorite Link: