bolt

Bergara B-14 Ridge SP

Bergara B-14 Ridge SP

Review

  Years ago I had a 308 varmint rifle that weighed a ton. I even took it deer hunting. So since then I have been looking for something shorter, and lighter, that still has the accuracy I got out of the varmint rifle. Bergara had exactly what I was looking for in their Ridge line of rifles. That rifle is the Ridge SP in 308 winchester.

  The Ridge SP is a shorter version of Bergara's standard Ridge line. The SP stands for “special purpose”. I think they intended this rifle for police snipers, but I can’t be sure. Really, the special purpose could be mid range hunting, or just someone wanting a bolt action performance rifle that doesn't weigh a ton. The only real difference between the .308 Ridge and the .308 Ridge SP, is that the SP has an 18 inch barrel instead of the standard 20 inch. 

  When you first look at the Ridge SP, it looks like most “hunting” style rifles. It has the normal looking American style stock with a hinged floor plate. The stock is a black polymer style with grey speckles. Bergara finished the stock in some sort of a semi-grippy coating. It is not smooth, but not sticky either. It gives a really good balance of grip if your hands are wet or muddy. It also has some diamond texture on the pistol grip and forend. There is also a nice soft buttpad. The buttpad probably helps more on the larger calibers, but it is really nice on the 308. To round out the stock, it has front and rear sling swivel studs and free floats the barrel. 

  Bergara is known for their barrels. Their barrels produce some good accuracy. They even have an accuracy guarantee. It is “Sub MOA at 100 yds with 3 shot groups of available factory match grade ammunition”. They recommend a few loads in 308 that should work. Those are: 168 gr Federal Gold Medal Match, 175 gr. Federal Gold Medal Match, Berger 175 gr OTM. I didn’t have any of these on hand, so I used some Norma 175 gr Golden Target and some 168 gr reloads I had made up. I was able to get 3 shot groups under 1 MOA fairly easily with the Ridge SP. I even have some 5 shot groups that measure under 1 MOA. All my accuracy testing was done at 100 yards. The barrels on the Ridge line are also threaded in the standard threads for whatever caliber they are chambered in. This gives the ability to put on any type of muzzle device, including suppressors. As a FYI, I broke in the barrel following the procedure in the rifles manual.

  The action on the Ridge SP is fantastic. It is super smooth to operate. For being a factory, mass produced rifle, I don't think you will find a smoother action, especially in the under $1000 price range that the Ridge SP falls into. Now that that is said, the action also feeds extremely nice out of the 4 round internal magazine. The large textured bolt handle tends to give you a good feel for what you are doing. It is also large enough to help with fast follow up shots. Something I couldn’t say about that varmint rifle I had.

  On top of the Ridge SP’s action is a 20 MOA picatinny scope rail. I believe this is because it is the SP line and Bergara doesn’t mention that it comes with one. If you want to change the rail or put normal scope mounts on the Ridge SP, it uses standard Remington 700 bases. I mounted a 4-16 Lucid on it when I first received the SP. Shortly after that I received a SightMark Presidio 5-30x56 and installed it. Yes, it is overkill for a rifle of this type, but I like it. One of my only complaints, with the scope rail, is that it gets in the way of loading the internal magazine. 

  The Bergara Ridge comes with an adjustable trigger. For a “hunting” style rifle, the trigger is fantastic. It’s a typical Remington style 700 trigger and can be replaced with any of the aftermarket triggers for that style of rifle. The trigger is a single stage, curved, and has zero take up, a short crisp break, and a little bit of over travel. I really like this trigger. The Ridge’s trigger is also adjustable for pull weight, from around 2 pounds up to 5 pounds. This one came from the factory at 3 pounds. I adjusted it down to about 2-¼ pounds and it works really good for me. If I were carrying it around in the brush, I personally would probably adjust it to 3-½ pounds or more. An aftermarket trigger, with the same pull range, would be hard pressed to be better.

  I have been really liking the Ridge SP. Granted I am not going to put thousands of rounds through it for a review. But I do have enough different types of ammo through it to know how well it works. I am well past 300 with about half that being some sort of match ammo. The match ammo does shoot better, but the new precision style hunting rounds are pretty good too. Now onto other stuff. I really like the texture of the stock. It is smooth but grippy. I’ve been told it feels weird, but then they shoot the Ridge SP with the stock and forget about it. My biggest complaint about the Ridge SP is the small loading/ejection port. This makes it harder to load the internal magazine. Add in the 20 MOA top rail, and it is even harder to load the magazine. For a hunting rifle this isn’t a deal breaker, but it is annoying. Speaking of that 20 MOA rail, I was thrilled that it came already installed. Even if you are only using the Ridge at 100 yards, a 20 MOA rail just makes sense. Did I mention the barrel is threaded? I did use it with a suppressor. The Ridge SP is a great suppressor host. The shorter barrel makes it so the overall length isn’t terrible with a long suppressor hanging off the end. The Ridge SP is just a great all around rifle.

  If you are in the market for a short, handy rifle, the Bergara Ridge SP would be a great choice. It has great accuracy, is super smooth, and doesn’t weigh a bunch. It really doesn’t matter if you are using it for hunting or anything else, it just works. The Bergara Ridge SP is also reasonably priced for what you get. If you want a quality, shorter barreled hunting rifle, definitely check out the Bergara Ridge Line. Especially the Ridge SP

Firearms Insider Reviews - Key Points

Claim to Fame:

Shorter barreled hunting or precision rifle

Target Market:

Anyone wanting a shorter barreled performance bolt action rifle

Features, Benefits, and Specifications of this product:

  • Caliber: 308 Win

  • Capacity: 4

  • 20 MOA picatinny mount included

  • Stock Material: Synthetic

  • OAL: 37.50"

  • Hand: Right Hand

  • Barrel Finish: Graphite Black Cerakote

  • Barrel Material: 4140 Steel

  • Twist: 1:10"

  • Receiver Material: Stainless Steel

  • Safety: Two-Position

  • Stock Type: American Style

  • Threaded: ⅝-24

  • Barrel Length: 18"

  • Receiver Finish: Graphite Black Cerakote

  • Trigger: Performance adjustable 2-5 lbs

  • Weight: 7.20 lbs

  • Stock Finish: Black / Gray Speckled

What other aesthetic options or finishes are available?

A ton of different calibers in the Ridge line. Only 6.5 Creedmoore and .308 Win in SP line with 18” barrel

What others are saying?:

Jamie P at Sportsmans Warehouse  

Ridge SP

This is a great rifle and accurate! Great everything rifle. I like the 18" barrel. Georgia Woods Hunting mostly some open field 300 yds shooting. Great action and the Ridge SP is very balanced and is comfortable to carry with a sling.

Link to other reviews:

Petersen’s Hunting

Price point:

MSRP = $999.00

Retail = $900

I need it now! Availability:

Primary Arms or Palmetto State Armory

Our Rating:

Pros:

  • Super smooth action

  • Accuracy

  • Uses Rem 700 style action and accessories 

  • Adjustable trigger

  • Good weight

  • 20 MOA picatinny rail came mounted on rifle

  • Threaded barrel

Cons:

  • Ejection port is short (so loading internal magazine is difficult)

Score: 8.50 Great

Walker Defense Dark Matter BCG

Walker Defense Dark Matter

High-Polish DLC BCG Review

  The heart of an AR15 is the Bolt Carrier Group or BCG. A quality BCG can make your rifle perform like a champion. A mil-spec BCG might work, but will not perform as well, especially if you are trying to get the best performance out of it. Walker Defense Research has released their Dark Matter Bolt Carrier Group. This highly polished, fitted, and DLC coated BCG is of the utmost quality.

  When looking for a Bolt Carrier Group, either to replace one or for a new build, there are things to consider. Do you want cheap, or are you looking for top quality that will last forever? The Walker Defense Dark Matter BCG is in the top quality group. To start with, it is a M16 style full auto carrier. So if you are fortunate to have a full auto M16, M4, etc, it will work with that. More important is the fact that the M16 carrier has the full mass, which allows it to run more smoothly, at least in my opinion. This Dark Matter carrier is also made from 8620 tool steel for a lifetime of use. 

  The Dark Matter BCG has a bunch of hi-end specifications. Some of these I will describe more in depth later. This BCG is for standard calibers and for use in direct impingement guns. These include 5.56/.223/300 blk, etc. It weighs 11-⅝ ounces and is made to true mil-spec dimensions. On the front end it has a C158 bolt that is magnetic particle inspected and high pressure tested. The 4130 gas key is properly staked using Optimized Carrier Key Screws (OCKS). These screws are deeply knurled to allow the staking to dig in, making them almost impossible to come loose. Lastly, the Dark matter BCG is DLC coated.

  Walker Defense is all about small batch quality. Here is what they have to say about the Dark Matter BCG: “We’ve always leaned into our advantage as a company specializing in small-batch production, but we’re taking it further. Those extra touches of quality add up and give us the ability to do things that larger companies just can’t. A few quick tangible examples of this:

Each carrier is matched by hand to each bolt and cam pin to prevent tolerance stacking and to ensure ideal, consistent fitment as the bolt cams back and forth.

We also pair each bolt with its firing pin to confirm adequate protrusion for reliable primer ignition.

Using OCKS screws for ultra-aggressive staking of the gas key, so it won’t loosen at high round counts”

Those are just a few things Walker Defense does to give you the best BCG around.

  DLC, or Diamond-Like Carbon coatings have been around for a while, but the Dark Matter BCG takes it to a new level. DLC coatings by themselves are extremely hard, corrosion and wear-resistant, and very slick, which gives them low coefficients of friction and superior dry lubricity. Walker Defense takes this up a notch by aggressively polishing the bare metal, before it is coated. As with most machined parts, a BCG is only as good as its base metal. This polishing is a very labor intensive process which makes the Dark Matter BCG super slick and mirror-like shiny. Then after a high quality dark black DLC coating is applied, they polish the DLC coated BCG again. This makes the BCG even more slick (and also hard to take pictures of because of the mirror finish it produces). By polishing the BCG before and after coating, you get an extremely smooth surface that carbon has a hard time sticking to. Cleanup on the Dark matter BCG is super easy. One can literally just wipe it off with a rag. Carbon just doesn’t stick to this BCG.

  I am using the Dark Matter BCG in a 300 blackout AR pistol. This pistol ran suppressed for around 60% of the review. Why does this matter? Because the pistol gets a lot dirtier. The upper on this pistol is nothing special, just your off the shelf AR upper receiver. Before installing the Dark Matter BCG, I was running a Mil-Spec BCG. After I installed the Dark Matter BCG I could tell a smoothness difference. Not just in how the gun cycles under use, but also when hand cycling the action. The AR pistol is just way more pleasant to shoot now. Another thing I noticed was that the brass ejection was more consistent than with the mil-spec BCG. I attribute this to the action cycling smoother. After around 800 rounds, I can’t even really notice any wear on the Dark Matter BCG, a testament to that fantastic polished DLC coating. 

  The Walker Defense Dark Matter BCG is slick, pun intended. This BCG is of the utmost quality. It has all the standard features you would want in a high quality BCG: MPI and HPT tested, DLC coated, quality base metals, and true mil-spec dimensions. That does not even count the “extras” Walker Defense puts into these. One would be hard pressed to find a better, or smoother BCG. The price on these is very reasonable for what you get, definitely a high value to price ratio. If you are looking for the slickest, highest quality BCG around, definitely go look at the Dark Matter High Polished BCG from Walker Defense. These are literally super slick.

Firearms Insider Reviews - Key Points

Claim to Fame:

Super slick, high quality bolt carrier group that is easy to clean

Target Market:

Those wanting a superior BCG

Features, Benefits, and Specifications of this product:

  • Coating: Highly-Polished DLC

  • Compatibility: M16/ M4 / AR-15 Using Direct Gas Impingement (not for use in piston guns)

  • Calibers: 5.56x45mm NATO / .223 Remington / .300 AAC Blackout

  • Profile: Full Auto Style Carrier w/ Properly Staked Gas Key

  • Bolt: C158

  • Carrier: 8620 Tool Steel

  • Total Weight: 11 5/8 OZ.

  • True Mil-Spec dimensions

  • 4130 steel gas key

  • Staked with OCKS Screws

  • 4140 steel extractor and cam pin

  • Hard chrome ground 8740 steel firing pin

  • Magnetic particle inspected

  • High Pressure Tested (HPT)

  • Made in the USA

What other aesthetic options or finishes are available?

Nickel Boron, Titanium, & Flat Dark Earth DLC

What others are saying?:

Couldn’t find anything as of publishing

Link to other reviews:

VSO Gun Channel on YouTube   

Price point:

MSRP = $269.99

Retail = $229.49 with discount code “Insider15”

I need it now! Availability:

Walker Defense or Optics Planet

Our Rating:

Pros:

  • Super Slick mirror finish

  • Easy to clean

  • Deep black DLC coating

  • Properly staked OKCS screws

  • Polished before and after coating

  • M16 profile

Cons:

  • May not always be in stock

Score: 9.00 Amazing

Walker Defense Titanium BCG

  Titanium bolt carrier groups (BCG) are one of the mysteries of the AR world. A few companies manufacture them, but what are they really for? I’ll try to answer that with the Walker Defense Research Titanium BCG.

  If you are looking at a Titanium (Ti) BCG, like the Walker Defense one, it is probably because of weight. Meaning you are trying to get the lightest possible parts around. The Walker Ti BCG weighs 7.8 ounces complete. A standard BCG weighs 11.8 ounces on my scale. That’s an off the shelf weight saving of 4 ounces. I know, that doesn’t seem like a lot, but when every ounce counts, that's a bunch. An important note is that the bolt is not titanium, it is 9130 steel with a Nickel Boron coating. The bolt is also magnetic partical inspected (MPI). A Ti bolt just doesn’t have the correct metallurgy to work, but for the carrier, it’s great. The Ti carrier, without the bolt, only weighs 5.7 ounces. 

  The Walker Defense Ti BCG is of the standard M16 profile. This is done so that it will work in almost every scenario, except piston guns. It is for direct impingement AR’s only. The M16 profile also gives the BCG strength and reliability. Cutting away material can weaken a BCG or make it not function correctly. Walker makes the BCG out of 6AL-4V grade 5 titanium. This even goes above my material knowledge, but I bet that they know what they are doing, especially since this titanium seems to be the standard for Ti BCG’s. An Ionbond Diamond Like Carbon (DLC) is then put on the carrier. This DLC coating gives the BCG a longer lifespan and makes it super smooth. Of course you need excellent machining to have a smooth coating, and the Walker Defense BCG definitely is machined super smooth. 

  Another reason for choosing a titanium BCG is for reduced recoil. The Ti BCG reduces recoil because there is less moving mass. This does come at a price. One also needs an adjustable gas block. This is a must for any lightweight BCG, not just the Walker Ti one. Then you have to tune the adjustable gas block. Good ones come with instructions on how to do this. Some might say that you can “tune” the Ti BCG by using heavier buffers and stuff. But a heavier buffer just adds more weight and more recoil. Isn’t one reason you would choose a Ti bcg is for weight? I can attest to the lower recoil of the Ti BCG. I have a Superlative arms adjustable gas block, tuned to eject the brass at about 3:30. According to the Mantis x, it reduced muzzle rise by over 50% and recoil width by over 80%. You can see in the short video that even with an A2 flash hider, there is hardly any recoil or muzzle climb. I could definitely feel the difference. 

  I was a little hesitant to try the Walker titanium BCG out. I just didn’t understand why I needed it. After using it thoroughly for some time, I can say it definitely makes the AR shoot so much smoother. All the claims are correct. Reduced muzzle rise. Reduced felt recoil. Faster follow up shots, due to those previously mentioned reductions. Yes, the BCG price can make you gasp a little. But in the end, it’s not much more expensive, if any, than other low mass BCG’s. Even some enhanced BCG’s are in the $250 range. The Walker Ti BCG also has forward assist notches, something a lot of the other lightweight carriers don’t have. For me, I just can’t get over how smooth the recoil impulse is with the Walker Ti BCG.

  Probably the last reason to choose Walker’s Ti BCG is durability. Titanium tends to be more resistant to heat and pressure. What do direct impingement guns have? Hot gasses being directly blown into the carrier. So anything that is more resistant to heat is a good thing. Walker also correctly stakes the gas key on, so it won’t be moving around causing problems. Just lube your Ti BCG as normal, and you should get a long life span from it. 

  The Walker Defense Titanium BCG does everything a BCG should do and more. The “more” is why I really like it. It’s lightweight, reduces recoil, is durable, and has a standard M16 profile. Hopefully you have a better understanding of why you would want the Walker Ti BCG. So if you want that “lightweight everything”, or just a super quality bolt carrier, head over to the Walker Defense Research website and give them a look. Everything I have from Walker is top notch and is always made in the USA.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight M16 FA Bolt Carrier Group

Target Market:

Lightweight builds, competition shooters, or anyone wanting a high quality BCG

FNBs (Features & Benefits of this product):

  • Compatibility: M16/ M4 / AR-15 Direct Gas Impingement (not for use in piston guns)

  • Calibers: 5.56x45mm NATO / .223 Remington / .300 AAC Blackout

  • Profile: Full Auto Style Carrier w/ Properly Staked Gas Key

  • Carrier Material: 6AL-4V (Grade 5) Titanium

  • Bolt Material: 9310 Steel

  • Carrier Coating: Ionbond DLC (Diamond Like Carbon)

  • Bolt Coating: Nickel Boron

  • Firing Pin: Steel w/ Chrome Finish

  • Made in the USA

  • Weight: Carrier-only (titanium): 5.7 oz, Total (Carrier, Bolt, firing pin, etc.): 7.8 oz

  • Adjustable gas block is highly recommended 

What other aesthetic options or finishes are available?

Carrier only

What others are saying?:

5/5 stars at Walker Defense   

Surprisingly Good

When I decided to upgrade my mil-spec bolt carrier group ("BCG"), I did a lot of research. I found a review of the Walker Defense Research BCG on Pew Pew Tactical. I was impressed by the statistics . I there and when I went to the site, found the NERO, a three-d printed muzzle device. I was impressed by the willingness to explore new technologies. I bought both a NERO and this BCG. I have a JP captured spring and a Superlative Arms adjustable gas block. With the mil-spec BCG, I could only tune the rifle to 1.5 turns into bleed (22 clicks on the detentes). It was a good result. The Walker DR BCG allowed me to bleed off another 1.5 turns (28 clicks). Because of that, I have extremely little barrel movement and keep my targets well (understand that the NERO is not on this rifle so there is no effect--this is strictly the BCG. With less mass, there is less slam. Whenever I take it to the range, others notice the smoothness and my targets. I have offhanded 120 rounds at a session and it is only my wallet that caused me to hang it up in a session. Two other things to mention: 1) my clockworks stay noticeably cleaner because I am able to bleed off so much dirty gas; and 2) the coating quality goes all the way out to the edges. This second issue needs a bit more explanation. On the mil-spec BCG the edges wore nearly immediately. The quality of the finish is so good that the edges remain crisp at 1,250 rounds. I have no reservations about recommending this BCG. I would suggest that you take full advantage by getting an adjustable gas block as well. The two together really make the gun a sweet shooter. My sons have various ARs but they always find an excuse for shooting mine.

Link to other reviews:

Nothing found

Price point:

MSRP = $359.99

Retail = $306.00 with “INSIDER15” discount code

I need it now! Availability:

Walker Defense Research 

Use “INSIDER15” FOR 15% OFF

Our Rating:

Pros:

  • Super lightweight

  • DLC coating on carrier

  • Nickel Boron coating on bolt

  • M16 Full Auto carrier specs

  • Super smooth operation

  • Less felt recoil

  • 100% Made in USA

Cons:

  • Price

  • Needs adjustable gas block

Score: 8.50 Great

Favorite Link: JSD Supply